THE MOLE

Concentration and Molarity of Solutions

By the end of the lesson, the learner should be able to:
Define concentration and molarity of solutions
Calculate molarity from mass and volume data
Convert between different concentration units
Apply molarity calculations to various solutions

Teacher exposition: Definition of molarity (moles/dm³). Worked examples: Calculate molarity from mass of solute and volume. Convert between g/dm³ and mol/dm³. Practice problems: Various salt solutions and their molarities.

Scientific calculators, Molarity charts, Various salt samples for demonstration

KLB Secondary Chemistry Form 3, Pages 41-43

THE MOLE

Preparation of Molar Solutions
Dilution of Solutions

By the end of the lesson, the learner should be able to:
Describe procedure for preparing molar solutions
Use volumetric flasks correctly
Calculate masses needed for specific molarities
Prepare standard solutions accurately
Define dilution process
Apply dilution formula M₁V₁ = M₂V₂
Calculate concentrations after dilution
Prepare dilute solutions from concentrated ones

Experiment: Prepare 1M, 0.5M, and 0.25M NaOH solutions in different volumes. Use volumetric flasks of 1000cm³, 500cm³, and 250cm³. Calculate required masses. Demonstrate proper dissolution and dilution techniques.
Experiment: Dilute 25cm³ of 2M HCl to different final volumes (250cm³ and 500cm³). Calculate resulting concentrations. Worked examples using dilution formula. Safety precautions when diluting acids.

Volumetric flasks (250, 500, 1000cm³), Sodium hydroxide pellets, Beam balance, Wash bottles, Beakers
Volumetric flasks, Hydrochloric acid (2M), Measuring cylinders, Pipettes, Safety equipment

KLB Secondary Chemistry Form 3, Pages 43-46
KLB Secondary Chemistry Form 3, Pages 46-50

THE MOLE

Stoichiometry - Experimental Determination of Equations

By the end of the lesson, the learner should be able to:
Determine chemical equations from experimental data
Calculate mole ratios from mass measurements
Write balanced chemical equations
Apply stoichiometry to displacement reactions

Experiment: Iron displacement of copper from CuSO₄ solution. Measure masses of iron used and copper displaced. Calculate mole ratios. Derive balanced chemical equation. Discuss spectator ions.

Iron filings, Copper(II) sulphate solution, Beam balance, Beakers, Filter equipment

KLB Secondary Chemistry Form 3, Pages 50-53

THE MOLE

Stoichiometry - Precipitation Reactions
Stoichiometry - Gas Evolution Reactions

By the end of the lesson, the learner should be able to:
Investigate stoichiometry of precipitation reactions
Determine mole ratios from volume measurements
Write ionic equations for precipitation
Analyze limiting and excess reagents

Experiment: Pb(NO₃)₂ + KI precipitation reaction. Use different volumes to determine stoichiometry. Measure precipitate heights. Plot graphs to find reaction ratios. Identify limiting reagents.

Test tubes, Lead(II) nitrate solution, Potassium iodide solution, Burettes, Ethanol, Rulers
Conical flask, Thistle funnel, Plastic bags, Rubber bands, Sodium carbonate, HCl solution

KLB Secondary Chemistry Form 3, Pages 53-56

THE MOLE

Volumetric Analysis - Introduction and Apparatus

By the end of the lesson, the learner should be able to:
Define volumetric analysis and titration
Identify and use titration apparatus correctly
Explain functions of pipettes and burettes
Demonstrate proper reading techniques

Practical session: Familiarization with pipettes and burettes. Practice filling and reading burettes accurately. Learn proper meniscus reading. Use pipette fillers safely. Rinse apparatus with appropriate solutions.

Pipettes (10, 20, 25cm³), Burettes (50cm³), Pipette fillers, Conical flasks, Various solutions

KLB Secondary Chemistry Form 3, Pages 58-59

THE MOLE

Titration - Acid-Base Neutralization
Titration - Diprotic Acids

By the end of the lesson, the learner should be able to:
Perform acid-base titrations accurately
Use indicators to determine end points
Record titration data properly
Calculate average titres from multiple readings
Investigate titrations involving diprotic acids
Determine basicity of acids from titration data
Compare volumes needed for mono- and diprotic acids
Write equations for diprotic acid reactions

Experiment: Titrate 25cm³ of 0.1M NaOH with 0.1M HCl using phenolphthalein. Repeat three times for consistency. Record data in tabular form. Calculate average titre. Discuss accuracy and precision.
Experiment: Titrate 25cm³ of 0.1M NaOH with 0.1M H₂SO₄. Compare volume used with previous HCl titration. Calculate mole ratios. Explain concept of basicity. Introduce dibasic and tribasic acids.

Burettes, Pipettes, 0.1M NaOH, 0.1M HCl, Phenolphthalein indicator, Conical flasks
Burettes, Pipettes, 0.1M H₂SO₄, 0.1M NaOH, Phenolphthalein, Basicity reference chart

KLB Secondary Chemistry Form 3, Pages 59-62
KLB Secondary Chemistry Form 3, Pages 62-65

THE MOLE

Standardization of Solutions

By the end of the lesson, the learner should be able to:
Define standardization process
Standardize HCl using Na₂CO₃ as primary standard
Calculate accurate concentrations from titration data
Understand importance of primary standards

Experiment: Prepare approximately 0.1M HCl and standardize using accurately weighed Na₂CO₃. Use methyl orange indicator. Calculate exact molarity from titration results. Discuss primary standard requirements.

Anhydrous Na₂CO₃, Approximately 0.1M HCl, Methyl orange, Volumetric flasks, Analytical balance

KLB Secondary Chemistry Form 3, Pages 65-67

THE MOLE

Back Titration Method

By the end of the lesson, the learner should be able to:
Understand principle of back titration
Apply back titration to determine composition
Calculate concentrations using back titration data
Determine atomic masses from back titration

Experiment: Determine atomic mass of divalent metal in MCO₃. Add excess HCl to carbonate, then titrate excess with NaOH. Calculate moles of acid that reacted with carbonate. Determine metal's atomic mass.

Metal carbonate sample, 0.5M HCl, 0M NaOH, Phenolphthalein, Conical flasks

KLB Secondary Chemistry Form 3, Pages 67-70

THE MOLE

Redox Titrations - Principles

By the end of the lesson, the learner should be able to:
Explain principles of redox titrations
Identify color changes in redox reactions
Understand self-indicating nature of some redox reactions
Write ionic equations for redox processes

Teacher exposition: Redox titration principles. Demonstrate color changes: MnO₄⁻ (purple) → Mn²⁺ (colorless), Cr₂O₇²⁻ (orange) → Cr³⁺ (green). Discussion: Self-indicating reactions. Write half-equations and overall ionic equations.

Potassium manganate(VII), Potassium dichromate(VI), Iron(II) solutions, Color change charts

KLB Secondary Chemistry Form 3, Pages 68-70

THE MOLE

Redox Titrations - KMnO₄ Standardization
Atomicity and Molar Gas Volume

By the end of the lesson, the learner should be able to:
Standardize KMnO₄ solution using iron(II) salt
Calculate molarity from redox titration data
Apply 1:5 mole ratio in calculations
Prepare solutions for redox titrations
Define atomicity of gaseous elements
Classify gases as monoatomic, diatomic, or triatomic
Determine molar gas volume experimentally
Calculate gas densities and molar masses

Experiment: Standardize KMnO₄ using FeSO₄(NH₄)₂SO₄·6H₂O. Dissolve iron salt in boiled, cooled water. Titrate with KMnO₄ until persistent pink color. Calculate molarity using 5:1 mole ratio.
Experiment: Measure volumes and masses of different gases (O₂, CO₂, Cl₂). Calculate densities and molar masses. Determine volume occupied by one mole. Compare values at different conditions.

Iron(II) ammonium sulfate, KMnO₄ solution, Dilute H₂SO₄, Pipettes, Burettes
Gas syringes (50cm³), Various gases, Analytical balance, Gas supply apparatus

KLB Secondary Chemistry Form 3, Pages 70-72
KLB Secondary Chemistry Form 3, Pages 73-75

THE MOLE
ORGANIC CHEMISTRY I

Combining Volumes of Gases - Experimental Investigation
Introduction to Organic Chemistry and Hydrocarbons

By the end of the lesson, the learner should be able to:
Investigate Gay-Lussac's law experimentally
Measure combining volumes of reacting gases
Determine simple whole number ratios
Write equations from volume relationships

Experiment: React NH₃ and HCl gases in measured volumes. Observe formation of NH₄Cl solid. Measure residual gas volumes. Determine combining ratios. Apply to other gas reactions.

Gas syringes, Dry NH₃ generator, Dry HCl generator, Glass connecting tubes, Clips
Carbon models, Hydrocarbon structure charts, Molecular model kits

KLB Secondary Chemistry Form 3, Pages 75-77

ORGANIC CHEMISTRY I

Sources of Alkanes - Natural Gas, Biogas, and Crude Oil

By the end of the lesson, the learner should be able to:
Identify natural sources of alkanes
Describe composition of natural gas and biogas
Explain crude oil as major source of alkanes
Describe biogas digester and its operation

Discussion: Natural gas composition (80% methane). Explanation: Biogas formation from organic waste decomposition. Teacher demonstration: Biogas digester model/diagram. Q/A: Environmental benefits of biogas production.

Biogas digester model/diagram, Natural gas composition charts, Organic waste samples

KLB Secondary Chemistry Form 3, Pages 86-87

ORGANIC CHEMISTRY I

Fractional Distillation of Crude Oil

By the end of the lesson, the learner should be able to:
Explain fractional distillation process
Perform fractional distillation of crude oil
Identify different fractions and their uses
Relate boiling points to molecular size

Experiment: Fractional distillation of crude oil using improvised column. Collect fractions at different temperatures (120°C intervals up to 350°C). Test fractions for appearance, flammability, and viscosity. Record observations and relate to molecular size.

Crude oil sample, Boiling tubes, High-temperature thermometer, Sand/porcelain chips, Bunsen burner, Test tubes

KLB Secondary Chemistry Form 3, Pages 87-89

ORGANIC CHEMISTRY I

Cracking of Alkanes - Thermal and Catalytic Methods
Alkane Series and Homologous Series Concept

By the end of the lesson, the learner should be able to:
Define cracking of alkanes
Distinguish between thermal and catalytic cracking
Write equations for cracking reactions
Explain industrial importance of cracking
Define homologous series using alkanes
Write molecular formulas for first 10 alkanes
Identify characteristics of homologous series
Apply general formula CₙH₂ₙ₊₂ for alkanes

Teacher exposition: Definition and purpose of cracking. Discussion: Thermal vs catalytic cracking conditions. Worked examples: Cracking equations producing smaller alkanes, alkenes, and hydrogen. Q/A: Industrial applications and hydrogen production.
Teacher exposition: Homologous series definition and characteristics. Table completion: Names, molecular formulas, and structures of first 10 alkanes. Discussion: General formula application. Pattern recognition: Gradual change in physical properties.

Cracking process diagrams, Chemical equation charts, Catalyst samples for demonstration
Alkane series chart, Molecular formula worksheets, Periodic table

KLB Secondary Chemistry Form 3, Pages 89-90
KLB Secondary Chemistry Form 3, Pages 90-92

ORGANIC CHEMISTRY I

Nomenclature of Alkanes - Straight Chain and Branched

By the end of the lesson, the learner should be able to:
Name straight-chain alkanes using IUPAC rules
Identify parent chains in branched alkanes
Name branched alkanes with substituent groups
Apply systematic naming rules correctly

Teacher demonstration: Step-by-step naming of branched alkanes. Rules application: Longest chain identification, numbering from nearest branch, substituent naming. Practice exercises: Various branched alkane structures. Group work: Name complex branched alkanes.

Structural formula charts, IUPAC naming rules poster, Molecular model kits

KLB Secondary Chemistry Form 3, Pages 90-92

ORGANIC CHEMISTRY I

Isomerism in Alkanes - Structural Isomers

By the end of the lesson, the learner should be able to:
Define isomerism in alkanes
Draw structural isomers of butane and pentane
Distinguish between chain and positional isomerism
Predict number of isomers for given alkanes

Teacher exposition: Isomerism definition and types. Practical exercise: Draw all isomers of butane and pentane. Discussion: Physical property differences between isomers. Model building: Use molecular models to show isomeric structures.

Molecular model kits, Isomerism charts, Structural formula worksheets

KLB Secondary Chemistry Form 3, Pages 92-94

ORGANIC CHEMISTRY I

Laboratory Preparation of Methane

By the end of the lesson, the learner should be able to:
Describe laboratory preparation of methane
Perform methane preparation experiment safely
Test physical and chemical properties of methane
Write equation for methane preparation

Experiment: Heat mixture of sodium ethanoate and soda lime. Collect methane gas over water. Tests: Color, smell, combustion, reaction with bromine in dark. Record observations in table format. Safety precautions during gas collection.

Sodium ethanoate, Soda lime, Round-bottomed flask, Gas collection apparatus, Bromine water, Wooden splints

KLB Secondary Chemistry Form 3, Pages 94-96

ORGANIC CHEMISTRY I

Laboratory Preparation of Ethane
Physical Properties of Alkanes
Chemical Properties of Alkanes - Combustion and Substitution

By the end of the lesson, the learner should be able to:
Prepare ethane using sodium propanoate and soda lime
Compare preparation methods of methane and ethane
Test properties of ethane gas
Write general equation for alkane preparation
Describe physical properties of alkanes
Explain trends in melting and boiling points
Relate molecular size to physical properties
Compare solubility in different solvents

Experiment: Prepare ethane from sodium propanoate and soda lime. Compare with methane preparation method. Carry out similar tests as for methane. Discussion: General pattern for alkane preparation from sodium alkanoates.
Data analysis: Study table of physical properties of first 10 alkanes. Graph plotting: Boiling points vs number of carbon atoms. Discussion: Intermolecular forces and property trends. Q/A: Solubility patterns in polar and non-polar solvents.

Sodium propanoate, Soda lime, Gas collection apparatus, Testing materials
Physical properties data tables, Graph paper, Calculators, Solubility demonstration materials
Molecular models, Halogenation reaction charts, Chemical equation worksheets

KLB Secondary Chemistry Form 3, Pages 94-96
KLB Secondary Chemistry Form 3, Pages 96-97

ORGANIC CHEMISTRY I

Uses of Alkanes in Industry and Daily Life

By the end of the lesson, the learner should be able to:
List major uses of different alkanes
Explain industrial applications of alkanes
Describe environmental considerations
Evaluate economic importance of alkanes

Discussion: Uses of gaseous alkanes as fuels. Teacher exposition: Industrial applications - carbon black, methanol production, hydrogen source. Q/A: Environmental impact and cleaner fuel initiatives. Assignment: Research local uses of alkane products.

Industrial application charts, Product samples, Environmental impact materials

KLB Secondary Chemistry Form 3, Pages 98-100

ORGANIC CHEMISTRY I

Introduction to Alkenes and Functional Groups

By the end of the lesson, the learner should be able to:
Define alkenes and unsaturation
Identify the C=C functional group
Write general formula for alkenes (CₙH₂ₙ)
Compare alkenes with alkanes

Teacher exposition: Alkenes definition and unsaturation concept. Introduction: C=C double bond as functional group. Table study: First 6 members of alkene series. Comparison: Alkenes vs alkanes - formulas and structures.

Alkene series charts, Molecular models showing double bonds, Functional group posters

KLB Secondary Chemistry Form 3, Pages 100-101

ORGANIC CHEMISTRY I

Nomenclature of Alkenes

By the end of the lesson, the learner should be able to:
Apply IUPAC rules for naming alkenes
Number carbon chains to give lowest numbers to double bonds
Name branched alkenes with substituents
Distinguish position isomers of alkenes

Teacher demonstration: Step-by-step naming of alkenes. Rules application: Longest chain with double bond, numbering from end nearest double bond. Practice exercises: Name various alkene structures. Group work: Complex branched alkenes with substituents.

IUPAC naming charts for alkenes, Structural formula worksheets, Molecular model kits

KLB Secondary Chemistry Form 3, Pages 101-102

ORGANIC CHEMISTRY I

Isomerism in Alkenes - Branching and Positional
Laboratory Preparation of Ethene

By the end of the lesson, the learner should be able to:
Draw structural isomers of alkenes
Distinguish between branching and positional isomerism
Identify geometric isomers in alkenes
Predict isomer numbers for given molecular formulas
Prepare ethene by dehydration of ethanol
Describe role of concentrated sulfuric acid
Set up apparatus safely for ethene preparation
Test physical and chemical properties of ethene

Practical exercise: Draw all isomers of butene and pentene. Teacher exposition: Branching vs positional isomerism in alkenes. Model building: Use molecular models for isomer visualization. Discussion: Geometric isomerism introduction (basic level).
Experiment: Dehydration of ethanol using concentrated H₂SO₄ at 170°C. Use sand bath for controlled heating. Pass gas through NaOH to remove impurities. Tests: Bromine water, acidified KMnO₄, combustion. Safety precautions with concentrated acid.

Molecular model kits, Isomerism worksheets, Geometric isomer models
Ethanol, Concentrated H₂SO₄, Round-bottomed flask, Sand bath, Gas collection apparatus, Testing solutions

KLB Secondary Chemistry Form 3, Pages 102
KLB Secondary Chemistry Form 3, Pages 102-104

ORGANIC CHEMISTRY I

Alternative Preparation of Ethene and Physical Properties

By the end of the lesson, the learner should be able to:
Describe catalytic dehydration using aluminum oxide
Compare different preparation methods
List physical properties of ethene
Explain trends in alkene physical properties

Demonstration: Alternative method using Al₂O₃ catalyst. Comparison: Acid vs catalytic dehydration methods. Data analysis: Physical properties of alkenes table. Discussion: Property trends with increasing molecular size.

Aluminum oxide catalyst, Glass wool, Alternative apparatus setup, Physical properties charts

KLB Secondary Chemistry Form 3, Pages 102-104

ORGANIC CHEMISTRY I

Chemical Properties of Alkenes - Addition Reactions

By the end of the lesson, the learner should be able to:
Explain addition reactions due to C=C double bond
Write equations for halogenation of alkenes
Describe hydrogenation and hydrohalogenation
Explain addition mechanism

Teacher exposition: Addition reactions definition and mechanism. Worked examples: Ethene + Cl₂, Br₂, HBr, H₂. Discussion: Markovnikov's rule for unsymmetrical addition. Practice: Various addition reaction equations.

Addition reaction charts, Mechanism diagrams, Chemical equation worksheets

KLB Secondary Chemistry Form 3, Pages 105-107

ORGANIC CHEMISTRY I

Oxidation Reactions of Alkenes and Polymerization

By the end of the lesson, the learner should be able to:
Describe oxidation by KMnO₄ and K₂Cr₂O₇
Explain polymerization of ethene
Define monomers and polymers
Write equations for polymer formation

Demonstration: Decolorization of KMnO₄ by alkenes. Teacher exposition: Polymerization process and polymer formation. Examples: Ethene → polyethene formation. Discussion: Industrial importance of polymerization. Practice: Write polymerization equations.

Oxidizing agents for demonstration, Polymer samples, Polymerization charts, Monomer-polymer models

KLB Secondary Chemistry Form 3, Pages 107-108

ORGANIC CHEMISTRY I

Tests for Alkenes and Uses
Introduction to Alkynes and Triple Bond
Nomenclature and Isomerism in Alkynes

By the end of the lesson, the learner should be able to:
Perform chemical tests to identify alkenes
Use bromine water and KMnO₄ as test reagents
List industrial and domestic uses of alkenes
Explain importance in plastic manufacture
Apply IUPAC naming rules for alkynes
Name branched alkynes with substituents
Draw structural isomers of alkynes
Identify branching and positional isomerism

Practical session: Test known alkenes with bromine water and acidified KMnO₄. Observe rapid decolorization compared to alkanes. Discussion: Uses in plastics, ethanol production, fruit ripening, detergents. Assignment: Research alkene applications.
Teacher demonstration: Systematic naming of alkynes using -yne suffix. Practice exercises: Name various alkyne structures. Drawing exercise: Isomers of pentyne and hexyne. Group work: Complex branched alkynes with multiple substituents.

Test alkenes, Bromine water, Acidified KMnO₄, Plastic samples, Uses reference charts
Alkyne series charts, Triple bond molecular models, Unsaturation comparison charts
IUPAC naming rules for alkynes, Structural formula worksheets, Molecular model kits

KLB Secondary Chemistry Form 3, Pages 108-109
KLB Secondary Chemistry Form 3, Pages 110-111

ORGANIC CHEMISTRY I

Laboratory Preparation of Ethyne

By the end of the lesson, the learner should be able to:
Prepare ethyne from calcium carbide and water
Set up gas collection apparatus safely
Test physical and chemical properties of ethyne
Write equation for ethyne preparation

Experiment: Calcium carbide + water reaction. Use sand layer for heat absorption. Collect ethyne over water. Tests: Color, smell, combustion, bromine water, acidified KMnO₄. Safety: Dry apparatus, controlled water addition.

Calcium carbide, Sand, Flat-bottomed flask, Dropping funnel, Gas collection apparatus, Testing solutions

KLB Secondary Chemistry Form 3, Pages 111-112

ORGANIC CHEMISTRY I

Physical and Chemical Properties of Alkynes

By the end of the lesson, the learner should be able to:
Describe physical properties of alkynes
Compare alkyne properties with alkenes and alkanes
Write combustion equations for alkynes
Explain addition reactions of alkynes

Data analysis: Physical properties of alkynes table. Comparison: Alkynes vs alkenes vs alkanes properties. Worked examples: Combustion reactions of ethyne. Teacher exposition: Two-step addition reactions due to triple bond.

Physical properties charts, Comparison tables, Combustion equation examples

KLB Secondary Chemistry Form 3, Pages 112-113

ORGANIC CHEMISTRY I

Addition Reactions of Alkynes and Chemical Tests

By the end of the lesson, the learner should be able to:
Write equations for halogenation of alkynes
Describe hydrogenation and hydrohalogenation
Compare reaction rates: alkynes vs alkenes
Perform chemical tests for alkynes

Worked examples: Two-step addition reactions of ethyne with Br₂, Cl₂, H₂. Discussion: Faster reaction rates in alkynes compared to alkenes. Practical session: Test alkynes with oxidizing agents. Comparison: Rate of decolorization vs alkenes.

Addition reaction charts, Chemical equation worksheets, Test solutions, Stopwatch for rate comparison

KLB Secondary Chemistry Form 3, Pages 113-115

ORGANIC CHEMISTRY I
NITROGEN AND ITS COMPOUNDS

Uses of Alkynes and Industrial Applications
Introduction to Nitrogen - Properties and Occurrence

By the end of the lesson, the learner should be able to:
List industrial uses of alkynes
Explain oxy-acetylene welding applications
Describe use in synthetic fiber production
Evaluate importance as chemical starting materials
Describe position of nitrogen in the periodic table
State electron configuration of nitrogen
Identify natural occurrence of nitrogen
Explain why nitrogen exists as diatomic molecules

Discussion: Industrial applications of alkynes in adhesives, plastics, synthetic fibers. Teacher demonstration: Oxy-acetylene flame principles (or video). Q/A: Starting materials for chemical synthesis. Assignment: Research local industrial uses.
Teacher exposition: Nitrogen as Group V element, atomic number 7, electron arrangement Discussion: 78% of atmosphere is nitrogen. Q/A: Combined nitrogen in compounds - nitrates, proteins. Explanation: N≡N triple bond strength.

Industrial application charts, Welding equipment demonstration/video, Synthetic fiber samples
Periodic table charts, Atmospheric composition diagrams, Molecular models showing N≡N triple bond

KLB Secondary Chemistry Form 3, Pages 115-116
KLB Secondary Chemistry Form 3, Pages 119

NITROGEN AND ITS COMPOUNDS

Isolation of Nitrogen from Air - Industrial and Laboratory Methods

By the end of the lesson, the learner should be able to:
Describe isolation of nitrogen from air
Explain fractional distillation of liquid air
Set up apparatus for laboratory isolation
Identify impurities removed during isolation

Experiment: Laboratory isolation using aspirator. Pass air through KOH solution to remove CO₂, then over heated copper to remove oxygen. Teacher demonstration: Fractional distillation principles. Flow chart study: Industrial nitrogen production steps.

Aspirator, KOH solution, Copper turnings, Heating apparatus, Fractional distillation flow chart

KLB Secondary Chemistry Form 3, Pages 119-121

NITROGEN AND ITS COMPOUNDS

Laboratory Preparation of Nitrogen Gas

By the end of the lesson, the learner should be able to:
Prepare nitrogen gas from ammonium compounds
Use sodium nitrite and ammonium chloride method
Test physical and chemical properties of nitrogen
Write equations for nitrogen preparation

Experiment: Mix sodium nitrite (7g) and ammonium chloride ( 5g) with water. Heat gently and collect gas over water. Tests: Color, smell, burning splint, litmus paper, lime water, burning Mg and S. Safety precautions during heating.

Sodium nitrite, Ammonium chloride, Round-bottomed flask, Gas collection apparatus, Test reagents, Deflagrating spoon

KLB Secondary Chemistry Form 3, Pages 121-123

NITROGEN AND ITS COMPOUNDS

Properties and Uses of Nitrogen Gas
Nitrogen(I) Oxide - Preparation and Properties

By the end of the lesson, the learner should be able to:
Describe physical properties of nitrogen
Explain chemical inertness of nitrogen
Describe reactions at high temperatures
List industrial uses of nitrogen

Analysis of test results: Colorless, odorless, does not burn or support combustion. Discussion: Triple bond strength and chemical inertness. High temperature reactions with metals forming nitrides. Uses: Haber process, light bulbs, refrigerant, inert atmosphere.

Property summary charts, Uses of nitrogen displays, Industrial application diagrams
Ammonium nitrate, Test tubes, Gas collection apparatus, Copper turnings, Sulfur, Glowing splints

KLB Secondary Chemistry Form 3, Pages 121-123

NITROGEN AND ITS COMPOUNDS

Nitrogen(II) Oxide - Preparation and Properties
Nitrogen(IV) Oxide - Preparation and Properties

By the end of the lesson, the learner should be able to:
Prepare nitrogen(II) oxide from copper and dilute nitric acid
Observe colorless gas and brown fumes formation
Test reactions with air and iron(II) sulfate
Explain oxidation in air to NO₂
Prepare nitrogen(IV) oxide from copper and concentrated nitric acid
Prepare from thermal decomposition of nitrates
Test properties including equilibrium with N₂O₄
Describe reactions and uses

Experiment: Add dilute HNO₃ to copper turnings. Observe brown fumes formation then disappearance. Tests: Effect on litmus, burning splint, FeSO₄ complex formation. Discussion: NO oxidation to NO₂ in air.
Experiment: Add concentrated HNO₃ to copper turnings. Collect red-brown gas by downward delivery. Alternative: Heat lead(II) nitrate with cooling U-tube. Tests: Solubility, effect on litmus, burning elements, cooling/heating effects.

Copper turnings, Dilute nitric acid, Gas collection apparatus, Iron(II) sulfate solution, Test reagents
Copper turnings, Concentrated nitric acid, Lead(II) nitrate, Gas collection apparatus, U-tube with ice, Testing materials

KLB Secondary Chemistry Form 3, Pages 125-127
KLB Secondary Chemistry Form 3, Pages 127-131

NITROGEN AND ITS COMPOUNDS

Comparison of Nitrogen Oxides and Environmental Effects

By the end of the lesson, the learner should be able to:
Compare preparation methods of nitrogen oxides
Distinguish between different nitrogen oxides
Explain formation in vehicle engines
Describe environmental pollution effects

Comparative study: Properties table of N₂O, NO, NO₂. Discussion: Formation in internal combustion engines. Environmental effects: Acid rain formation, smog, health problems. Worked examples: Distinguishing tests for each oxide.

Comparison charts, Environmental impact diagrams, Vehicle emission illustrations

KLB Secondary Chemistry Form 3, Pages 123-131

NITROGEN AND ITS COMPOUNDS

Laboratory Preparation of Ammonia

By the end of the lesson, the learner should be able to:
Prepare ammonia from ammonium salts and alkalis
Set up apparatus with proper gas collection
Test characteristic properties of ammonia
Explain displacement reaction principle

Experiment: Heat mixture of calcium hydroxide and ammonium chloride. Collect gas by upward delivery using calcium oxide as drying agent. Tests: Color, smell, combustion, HCl fumes test, litmus paper. Safety: Slanted flask position.

Calcium hydroxide, Ammonium chloride, Round-bottomed flask, Calcium oxide, HCl solution, Glass rod, Litmus paper

KLB Secondary Chemistry Form 3, Pages 131-134

NITROGEN AND ITS COMPOUNDS

Preparation of Aqueous Ammonia and Solubility

By the end of the lesson, the learner should be able to:
Prepare aqueous ammonia solution
Demonstrate high solubility using fountain experiment
Explain alkaline properties of aqueous ammonia
Write equations for ammonia in water

Experiment: Dissolve ammonia in water using inverted funnel method. Fountain experiment: Show partial vacuum formation due to high solubility. Tests: Effect on universal indicator, pH measurement. Theory: NH₃ + H₂O equilibrium.

Ammonia generation apparatus, Funnel, Universal indicator, Fountain apparatus, pH meter/paper

KLB Secondary Chemistry Form 3, Pages 134-136

NITROGEN AND ITS COMPOUNDS

Reactions of Aqueous Ammonia with Metal Ions
Chemical Properties of Ammonia - Reactions with Acids and Combustion

By the end of the lesson, the learner should be able to:
Test reactions of aqueous ammonia with various metal ions
Observe precipitate formation and dissolution
Explain complex ion formation
Use reactions for metal ion identification
Test neutralization reactions with acids
Investigate combustion of ammonia
Examine catalytic oxidation with platinum
Study reducing properties with metal oxides

Experiment: Add aqueous ammonia dropwise to solutions of Ca²⁺, Mg²⁺, Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Cu²⁺. Record observations with few drops vs excess ammonia. Identify complex ion formation with Zn²⁺ and Cu²⁺.
Experiments: (a) Neutralize H₂SO₄, HCl, HNO₃ with aqueous ammonia using indicators. (b) Attempt combustion in air and oxygen. (c) Catalytic oxidation with heated platinum wire. (d) Reduction of CuO by ammonia. Record all observations.

Various metal salt solutions, Aqueous ammonia, Test tubes, Droppers, Observation recording tables
Various dilute acids, Methyl orange, Oxygen supply, Platinum wire, Copper(II) oxide, Combustion apparatus, U-tube for collection

KLB Secondary Chemistry Form 3, Pages 136-138
KLB Secondary Chemistry Form 3, Pages 138-140

NITROGEN AND ITS COMPOUNDS

Industrial Manufacture of Ammonia - The Haber Process

By the end of the lesson, the learner should be able to:
Describe raw materials and their sources
Explain optimum conditions for ammonia synthesis
Draw flow diagram of Haber process
Explain economic considerations and catalyst use

Teacher exposition: N₂ from air, H₂ from natural gas/cracking. Process conditions: 500°C, 200 atm, iron catalyst. Flow diagram study: Purification, compression, catalytic chamber, separation, recycling. Economic factors: Compromise between yield and rate.

Haber process flow charts, Industrial diagrams, Catalyst samples, Economic analysis sheets

KLB Secondary Chemistry Form 3, Pages 140-141

NITROGEN AND ITS COMPOUNDS

Uses of Ammonia and Introduction to Nitrogenous Fertilizers
Nitrogenous Fertilizers - Types and Calculations

By the end of the lesson, the learner should be able to:
List major uses of ammonia
Explain importance as fertilizer
Calculate nitrogen percentages in fertilizers
Compare different nitrogenous fertilizers

Discussion: Uses - fertilizer, refrigerant, cleaning agent, hydrazine production. Introduction to fertilizers: Ammonium sulfate, ammonium nitrate, ammonium phosphate, urea, CAN. Calculations: Percentage nitrogen content in each fertilizer type.

Fertilizer samples, Percentage calculation worksheets, Use application charts, Calculator
Various fertilizer formulas, Scientific calculators, Laboratory preparation materials, Environmental impact data

KLB Secondary Chemistry Form 3, Pages 141-144

NITROGEN AND ITS COMPOUNDS

Laboratory Preparation of Nitric(V) Acid

By the end of the lesson, the learner should be able to:
Prepare nitric acid from nitrate and concentrated sulfuric acid
Set up all-glass apparatus safely
Explain brown fumes and yellow color
Purify nitric acid by air bubbling

Experiment: Heat mixture of KNO₃ and concentrated H₂SO₄ in all-glass apparatus. Collect yellow nitric acid. Explain brown fumes (NO₂) and yellow color. Bubble air through to remove dissolved NO₂. Safety: Gentle heating, fume cupboard.

Potassium nitrate, Concentrated sulfuric acid, All-glass apparatus, Condenser, Retort stand, Safety equipment

KLB Secondary Chemistry Form 3, Pages 144-145

NITROGEN AND ITS COMPOUNDS

Industrial Manufacture of Nitric(V) Acid
Reactions of Dilute Nitric(V) Acid with Metals

By the end of the lesson, the learner should be able to:
Describe catalytic oxidation process
Explain raw materials and conditions
Draw flow diagram of industrial process
Calculate theoretical yields and efficiency
Test reactions with various metals
Explain absence of hydrogen gas production
Observe formation of nitrogen oxides
Write equations for metal-acid reactions

Teacher exposition: Ostwald process - NH₃ oxidation with Pt-Rh catalyst at 900°C. Flow diagram: Oxidation chamber, cooling, absorption tower. Equations: NH₃ → NO → NO₂ → HNO₃. Economic factors: Catalyst cost, heat recovery.
Experiment: Add dilute HNO₃ to Mg, Zn, Cu. Test gases produced with burning splint. Observe that no H₂ is produced (except with Mg in very dilute acid). Explain oxidation of any H₂ formed to water. Record observations and write equations.

Industrial process flow charts, Catalyst samples, Process condition charts, Efficiency calculation sheets
Various metals (Mg, Zn, Cu), Dilute nitric acid, Test tubes, Gas testing apparatus, Burning splints

KLB Secondary Chemistry Form 3, Pages 145-147
KLB Secondary Chemistry Form 3, Pages 147-150

NITROGEN AND ITS COMPOUNDS

Reactions of Dilute Nitric(V) Acid with Carbonates and Hydroxides

By the end of the lesson, the learner should be able to:
Test reactions with carbonates and hydrogen carbonates
Test neutralization with metal hydroxides and oxides
Identify products formed
Write balanced chemical equations

Experiments: (a) Add dilute HNO₃ to Na₂CO₃, CaCO₃, ZnCO₃, CuCO₃, NaHCO₃. Test gas evolved with lime water. (b) Neutralize NaOH, CaO, CuO, PbO with dilute HNO₃. Record color changes and write equations.

Various carbonates and hydroxides, Dilute nitric acid, Lime water, Universal indicator, Test tubes

KLB Secondary Chemistry Form 3, Pages 147-150

NITROGEN AND ITS COMPOUNDS

Reactions of Concentrated Nitric(V) Acid - Oxidizing Properties

By the end of the lesson, the learner should be able to:
Demonstrate strong oxidizing properties
Test reactions with FeSO₄, sulfur, and copper
Observe formation of nitrogen dioxide
Explain electron transfer in oxidation

Experiments: (a) Add concentrated HNO₃ to acidified FeSO₄ - observe color change. (b) Add to sulfur - observe reaction. (c) Add to copper turnings - observe vigorous reaction and brown fumes. Explain oxidizing power and reduction to NO₂.

Concentrated nitric acid, Iron(II) sulfate, Sulfur powder, Copper turnings, Test tubes, Fume cupboard access

KLB Secondary Chemistry Form 3, Pages 150-151