ORGANIC CHEMISTRY II

Introduction to Alkanols and Nomenclature

By the end of the lesson, the learner should be able to:
Define alkanols and identify functional group
- Apply nomenclature rules for alkanols
- Draw structural formulae of simple alkanols
- Compare alkanols with corresponding alkanes

Q/A: Review alkanes, alkenes from Form 3
- Study functional group -OH concept
- Practice naming alkanols using IUPAC rules
- Complete Table 6.2 - alkanol structures

Molecular models, Table 6.1 and 6.2, alkanol structure charts, student books

KLB Secondary Chemistry Form 4, Pages 167-170

ORGANIC CHEMISTRY II

Isomerism in Alkanols
Laboratory Preparation of Ethanol
Industrial Preparation and Physical Properties
Chemical Properties of Alkanols I
Chemical Properties of Alkanols II
Uses of Alkanols and Health Effects
Introduction to Alkanoic Acids

By the end of the lesson, the learner should be able to:
Explain positional and chain isomerism
- Draw isomers of given alkanols
- Name different isomeric forms
- Classify isomers as primary, secondary, or tertiary
Investigate oxidation and esterification reactions
- Test oxidizing agents on ethanol
- Prepare esters from alkanols
- Explain dehydration reactions

Study positional isomerism examples (propan-1-ol vs propan-2-ol)
- Practice drawing chain isomers
- Exercises on isomer identification and naming
- Discussion on structural differences
Complete Experiment 6.2: Test with acidified K₂Cr₂O₇ and KMnO₄
- Observe color changes
- Esterification with ethanoic acid
- Study dehydration conditions

Isomer structure charts, molecular models, practice worksheets, student books
Sugar, yeast, warm water, conical flask, delivery tube, lime water, thermometer
Table 6.3, industrial process diagrams, ethene structure models, property comparison charts
Ethanol, sodium metal, universal indicator, concentrated H₂SO₄, ethanoic acid, test tubes
Acidified potassium chromate/manganate, ethanoic acid, concentrated H₂SO₄, heating apparatus
Charts showing alkanol uses, health impact data, methylated spirit samples, discussion materials
Alkanoic acid structure charts, Table 6.5 and 6.6, molecular models, student books

KLB Secondary Chemistry Form 4, Pages 170-171
KLB Secondary Chemistry Form 4, Pages 173-176

ORGANIC CHEMISTRY II

Laboratory Preparation of Ethanoic Acid
Physical and Chemical Properties of Alkanoic Acids

By the end of the lesson, the learner should be able to:
Prepare ethanoic acid by oxidation
- Write equations for preparation
- Set up oxidation apparatus
- Identify product by testing

Experiment 6.3: Oxidize ethanol using acidified KMnO₄
- Set up heating and distillation apparatus
- Collect distillate at 118°C
- Test product properties

Ethanol, KMnO₄, concentrated H₂SO₄, distillation apparatus, thermometer, round-bottom flask
2M ethanoic acid, universal indicator, Mg strip, Na₂CO₃, NaOH, phenolphthalein, test tubes

KLB Secondary Chemistry Form 4, Pages 179-180

ORGANIC CHEMISTRY II

Esterification and Uses of Alkanoic Acids
Introduction to Detergents and Soap Preparation

By the end of the lesson, the learner should be able to:
Explain ester formation process
- Write esterification equations
- State uses of alkanoic acids
- Prepare simple esters

Complete esterification experiments
- Study concentrated H₂SO₄ as catalyst
- Write general esterification equation
- Discuss applications in food, drugs, synthetic fibres

Ethanoic acid, ethanol, concentrated H₂SO₄, test tubes, heating apparatus, cold water
Castor oil, 4M NaOH, NaCl, evaporating dish, water bath, stirring rod, filter paper

KLB Secondary Chemistry Form 4, Pages 182-183

ORGANIC CHEMISTRY II

Mode of Action of Soap and Hard Water Effects

By the end of the lesson, the learner should be able to:
Explain soap molecule structure
- Describe cleaning mechanism
- Investigate hard water effects
- Compare soap performance in different waters

Study hydrophobic and hydrophilic ends
- Demonstrate micelle formation
- Test soap in distilled vs hard water
- Observe scum formation
- Write precipitation equations

Soap samples, distilled water, hard water (CaCl₂/MgSO₄ solutions), test tubes, demonstration materials

KLB Secondary Chemistry Form 4, Pages 186-188

ORGANIC CHEMISTRY II

Soapless Detergents and Environmental Effects
Introduction to Polymers and Addition Polymerization
Addition Polymers - Types and Properties
Condensation Polymerization and Natural Polymers

By the end of the lesson, the learner should be able to:
Explain soapless detergent preparation
- Compare advantages/disadvantages
- Discuss environmental impact
- Analyze pollution effects
Identify different addition polymers
- Draw structures from monomers
- Name common polymers
- Relate structure to properties

Study alkylbenzene sulphonate preparation
- Compare Table 6.9 - soap vs soapless
- Discussion on eutrophication and biodegradability
- Environmental awareness
Study polystyrene, PTFE, perspex formation
- Practice identifying monomers from polymer structures
- Work through polymer calculation examples
- Properties analysis

Flow charts of detergent manufacture, Table 6.9, environmental impact data, sample detergents
Polymer samples, monomer structure charts, molecular models, calculators, polymer formation diagrams
Various polymer samples, structure identification exercises, calculation worksheets, Table 6.10
Nylon samples, rubber samples, condensation reaction diagrams, natural polymer examples

KLB Secondary Chemistry Form 4, Pages 188-191
KLB Secondary Chemistry Form 4, Pages 195-197

ORGANIC CHEMISTRY II

Polymer Properties and Applications

By the end of the lesson, the learner should be able to:
Compare advantages and disadvantages of synthetic polymers
- State uses of different polymers
- Discuss environmental concerns
- Analyze polymer selection

Study Table 6.10 - polymer uses
- Advantages: strength, lightness, moldability
- Disadvantages: non-biodegradability, toxic gases
- Application analysis

Table 6.10, polymer application samples, environmental impact studies, product examples

KLB Secondary Chemistry Form 4, Pages 200-201

ORGANIC CHEMISTRY II
ACIDS, BASES AND SALTS
ACIDS, BASES AND SALTS
ACIDS, BASES AND SALTS

Comprehensive Problem Solving and Integration
Definition of Acids
Strength of Acids
Definition of Bases

By the end of the lesson, the learner should be able to:
Solve complex problems involving alkanols and acids
- Apply knowledge to practical situations
- Integrate polymer concepts
- Practice examination questions

Worked examples on organic synthesis
- Problem-solving on isomers, reactions, polymers
- Integration of all unit concepts
- Practice examination-style questions

Comprehensive problem sets, past examination papers, calculators, organic chemistry summary charts
Magnesium strips, zinc carbonate, 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid, test tubes, test tube rack
2M HCl, 2M ethanoic acid, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes, beakers, wires
Calcium hydroxide, red litmus paper, phenolphthalein indicator, distilled water, test tubes, spatula, evaporating dish

KLB Secondary Chemistry Form 4, Pages 167-201

ACIDS, BASES AND SALTS

Strength of Bases
Acid-Base Reactions
Effect of Solvent on Acids

By the end of the lesson, the learner should be able to:
- Compare strengths of bases using pH values
-Determine strengths of bases by comparing their electrical conductivity
-Classify bases as either strong or weak
-Explain complete and partial ionization of bases

Class experiment: Test pH of 2M NaOH and 2M ammonia solution using universal indicator. Test electrical conductivity of both solutions using same apparatus as acids. Compare deflections and pH values. Explain in terms of OH⁻ ion concentration and complete vs partial ionization.

2M NaOH, 2M ammonia solution, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes
Various acids and bases from previous lessons, indicators, beakers, measuring cylinders, stirring rods
HCl gas, distilled water, methylbenzene, magnesium ribbon, calcium carbonate, litmus paper, test tubes, gas absorption apparatus

KLB Secondary Chemistry Form 4, Pages 5-7

ACIDS, BASES AND SALTS

Effect of Solvent on Bases
Amphoteric Oxides and Hydroxides
Definition of Salts and Precipitation
Solubility of Chlorides, Sulphates and Sulphites
Complex Ions Formation

By the end of the lesson, the learner should be able to:
- Investigate effect of polar and non-polar solvents on ammonia gas
-Compare ammonia behavior in water vs methylbenzene
-Explain formation of ammonium hydroxide
-Write equations for ammonia dissolution in water
- Find out cations that form insoluble chlorides, sulphates and sulphites
-Write ionic equations for formation of insoluble salts
-Distinguish between sulphate and sulphite precipitates
-Investigate effect of warming on precipitates

Class experiment: Test dry ammonia with dry litmus. Dissolve ammonia in water and test with litmus. Dissolve ammonia in methylbenzene and test with litmus. Record observations in table. Write equation for NH₃ + H₂O reaction. Explain why only aqueous ammonia shows basic properties.
Class experiment: Add NaCl, Na₂SO₄, Na₂SO₃ to solutions of Pb²⁺, Ba²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Al³⁺. Warm mixtures. Record observations in table. Test sulphite precipitates with dilute HCl. List soluble and insoluble salts.

Dry ammonia gas, distilled water, methylbenzene, red litmus paper, test tubes, gas collection apparatus
Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂, 2M HNO₃, 2M NaOH, boiling tubes, heating source
Na₂CO₃ solution, salt solutions containing various metal ions, test tubes, droppers
2M NaCl, 2M Na₂SO₄, 2M Na₂SO₃, 0.1M salt solutions, dilute HCl, test tubes, heating source
2M NaOH, 2M NH₃ solution, 0.5M salt solutions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 9-10
KLB Secondary Chemistry Form 4, Pages 14-16

ACIDS, BASES AND SALTS

Solubility and Saturated Solutions

By the end of the lesson, the learner should be able to:
- Define the term solubility
-Determine solubility of a given salt at room temperature
-Calculate mass of solute and solvent
-Express solubility in different units

Class experiment: Weigh evaporating dish and watch glass. Measure 20cm³ saturated KNO₃ solution. Record temperature. Evaporate to dryness carefully. Calculate masses of solute, solvent, and solution. Determine solubility per 100g water and in moles per litre. Discuss definition and significance.

Saturated KNO₃ solution, evaporating dish, watch glass, measuring cylinder, thermometer, balance, heating source

KLB Secondary Chemistry Form 4, Pages 16-18

ACIDS, BASES AND SALTS

Effect of Temperature on Solubility
Solubility Curves and Applications

By the end of the lesson, the learner should be able to:
- Investigate the effect of temperature on solubility of potassium chlorate
-Record temperature at which crystals appear
-Calculate solubility at different temperatures
-Plot solubility curve

Class experiment: Dissolve 4g KClO₃ in 15cm³ water by warming. Cool while stirring and note crystallization temperature. Add 5cm³ water portions and repeat until total volume is 40cm³. Calculate solubility in g/100g water for each temperature. Plot solubility vs temperature graph.

KClO₃, measuring cylinders, thermometer, burette, boiling tubes, heating source, graph paper
Graph paper, ruler, pencil, calculator, data tables from textbook

KLB Secondary Chemistry Form 4, Pages 18-20

ACIDS, BASES AND SALTS

Fractional Crystallization
Hardness of Water - Investigation

By the end of the lesson, the learner should be able to:
- Define fractional crystallization
-Apply knowledge of solubility curves in separation of salts
-Calculate masses of salts that crystallize
-Explain separation of salt mixtures

Work through separation problems using solubility data for KNO₃ and KClO₃ mixtures. Calculate which salt crystallizes first when cooled from 50°C to 20°C. Plot combined solubility curves. Discuss applications in Lake Magadi and Ngomeni salt works. Solve practice problems.

Calculator, graph paper, data tables, worked examples from textbook
Soap solution, burette, various salt solutions, conical flasks, distilled water, tap water, rainwater, heating source

KLB Secondary Chemistry Form 4, Pages 21-22

ACIDS, BASES AND SALTS

Types and Causes of Water Hardness
Effects of Hard Water
Methods of Removing Hardness I

By the end of the lesson, the learner should be able to:
- Define temporary and permanent hardness
-Explain causes of temporary hardness
-Explain causes of permanent hardness
-Write equations for decomposition of hydrogen carbonates
- Explain removal of hardness by boiling
-Explain removal by distillation
-Write equations for these processes
-Compare effectiveness of different methods

Q/A: Review previous experiment results. Explain temporary hardness caused by Ca(HCO₃)₂ and Mg(HCO₃)₂. Write decomposition equations when boiled. Explain permanent hardness caused by CaSO₄, MgSO₄, Ca(NO₃)₂, Mg(NO₃)₂. Discuss why permanent hardness cannot be removed by boiling.
Demonstrate boiling method: Boil hard water samples from previous experiments and test with soap. Write equations for Ca(HCO₃)₂ and Mg(HCO₃)₂ decomposition. Discuss distillation method using apparatus setup. Compare costs and effectiveness. Explain why boiling only removes temporary hardness.

Student books, examples from previous experiment, chalkboard for equations
Samples of fur deposits, pictures of scaled pipes, calculator for cost analysis
Hard water samples, heating source, soap solution, distillation apparatus diagram

KLB Secondary Chemistry Form 4, Pages 24-25
KLB Secondary Chemistry Form 4, Pages 25-26

ACIDS, BASES AND SALTS
ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Methods of Removing Hardness II
Endothermic and Exothermic Reactions

By the end of the lesson, the learner should be able to:
- Explain removal using sodium carbonate
-Describe ion exchange method
-Explain removal using calcium hydroxide and ammonia
-Write equations for all processes

Demonstrate addition of Na₂CO₃ to hard water - observe precipitation. Explain ion exchange using resin (NaX) showing Ca²⁺ + 2NaX → CaX₂ + 2Na⁺. Discuss regeneration with brine. Write equations for Ca(OH)₂ and NH₃ methods. Compare all methods for effectiveness and cost.

Na₂CO₃ solution, hard water samples, ion exchange resin diagram, Ca(OH)₂, NH₃ solution
250ml plastic beakers, tissue paper, rubber bands, NH₄NO₃, NaOH pellets, distilled water, thermometers, spatulas, measuring cylinders

KLB Secondary Chemistry Form 4, Pages 25-26

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy Notation and Energy Content
Bond Breaking and Bond Formation

By the end of the lesson, the learner should be able to:
- Define enthalpy and enthalpy change
-Use the symbol ΔH to represent enthalpy changes
-Calculate enthalpy changes using the formula ΔH = H(products) - H(reactants)
-Distinguish between positive and negative enthalpy changes

Q/A: Review previous experiment results. Introduce enthalpy symbol H and enthalpy change ΔH. Calculate enthalpy changes from previous experiments. Explain why endothermic reactions have positive ΔH and exothermic reactions have negative ΔH. Practice calculations with worked examples.

Student books, calculators, worked examples from textbook, chalkboard for calculations
Crushed pure ice, 250ml glass beakers, thermometers, heating source, stopwatch, graph paper, stirring rods

KLB Secondary Chemistry Form 4, Pages 31-32

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Latent Heat of Fusion and Vaporization

By the end of the lesson, the learner should be able to:
- Define latent heat of fusion and molar heat of fusion
-Define latent heat of vaporization and molar heat of vaporization
-Explain why temperature remains constant during phase changes
-Relate intermolecular forces to melting and boiling points

Discussion based on previous heating curve experiment. Explain energy used to overcome intermolecular forces during melting and boiling. Compare molar heats of fusion and vaporization for water and ethanol. Relate strength of intermolecular forces to magnitude of latent heats. Calculate energy required for phase changes.

Data tables showing molar heats of fusion/vaporization, calculators, heating curves from previous lesson

KLB Secondary Chemistry Form 4, Pages 32-35

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Energy Calculations
Determination of Enthalpy of Solution I
Thermochemical Equations
Enthalpy of Solution of Concentrated Sulphuric Acid

By the end of the lesson, the learner should be able to:
- Calculate energy changes in reactions using bond energies
-Apply the formula: Heat of reaction = Bond breaking energy + Bond formation energy
-Determine whether reactions are exothermic or endothermic
-Use bond energy data to solve problems
- Write thermochemical equations including enthalpy changes
-Define molar heat of solution
-Draw energy level diagrams for dissolution reactions
-Interpret thermochemical equations correctly

Work through formation of HCl from H₂ and Cl₂ using bond energies. Calculate energy required to break H-H and Cl-Cl bonds. Calculate energy released when H-Cl bonds form. Apply formula: ΔH = Energy absorbed - Energy released. Practice with additional examples. Discuss why calculated values may differ from experimental values.
Using data from previous experiment, write thermochemical equations for NH₄NO₃ and NaOH dissolution. Show proper notation with state symbols and ΔH values. Draw corresponding energy level diagrams. Practice writing thermochemical equations for various reactions. Explain significance of molar quantities in equations.

Bond energy data tables, calculators, worked examples, practice problems
250ml plastic beakers, 2.0g samples of NH₄NO₃ and NaOH, distilled water, thermometers, measuring cylinders, analytical balance, calculators
Results from previous experiment, graph paper for energy level diagrams, practice examples
Concentrated H₂SO₄, distilled water, 250ml plastic beaker, tissue paper, measuring cylinders, thermometer, safety equipment

KLB Secondary Chemistry Form 4, Pages 35-36
KLB Secondary Chemistry Form 4, Pages 38-39

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Combustion

By the end of the lesson, the learner should be able to:
- Define molar heat of combustion
-Determine enthalpy of combustion of ethanol experimentally
-Explain why experimental values differ from theoretical values
-Calculate molar enthalpy of combustion from experimental data

Class experiment: Burn ethanol in small bottle with wick to heat 100cm³ water in glass beaker. Record initial and final masses of bottle+ethanol and temperature change. Calculate moles of ethanol burned and heat evolved. Determine molar enthalpy of combustion. Compare with theoretical value (-1368 kJ/mol). Discuss sources of error.

Ethanol, small bottles with wicks, 250ml glass beakers, tripod stands, wire gauze, thermometers, analytical balance, measuring cylinders

KLB Secondary Chemistry Form 4, Pages 41-44

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Displacement
Enthalpy of Neutralization

By the end of the lesson, the learner should be able to:
- Define molar heat of displacement
-Investigate displacement of copper(II) ions by zinc
-Calculate molar heat of displacement
-Explain relationship between position in reactivity series and heat of displacement

Class experiment: Add 4.0g zinc powder to 100cm³ of 0.5M CuSO₄ solution in wrapped plastic beaker. Record temperature change and observations. Calculate moles of Zn used and Cu²⁺ displaced. Determine molar heat of displacement. Write ionic equation. Discuss why excess zinc is used. Compare with theoretical value.

Zinc powder, 0.5M CuSO₄ solution, 250ml plastic beakers, tissue paper, thermometers, analytical balance, stirring rods
2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, 250ml plastic beakers, tissue paper

KLB Secondary Chemistry Form 4, Pages 44-47

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Standard Conditions and Standard Enthalpy Changes
Hess's Law - Introduction and Theory

By the end of the lesson, the learner should be able to:
- Identify standard conditions for measuring enthalpy changes
-Define standard enthalpy changes using ΔH° notation
-Explain importance of standard conditions
-Use subscripts to denote different types of enthalpy changes

Q/A: Review previous enthalpy measurements. Introduce standard conditions: 25°C (298K) and 1 atmosphere pressure (101.325 kPa). Explain ΔH° notation and subscripts (ΔH°c for combustion, ΔH°f for formation, etc.). Discuss why standard conditions are necessary for comparison. Practice using correct notation.

Student books, examples of standard enthalpy data, notation practice exercises
Energy cycle diagrams for methane formation, chalkboard illustrations, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Energy Cycle Diagrams
Hess's Law Calculations
Lattice Energy and Hydration Energy

By the end of the lesson, the learner should be able to:
- Draw energy cycle diagrams
-Link enthalpy of formation with enthalpy of combustion
-Calculate unknown enthalpy changes using energy cycles
-Apply Hess's Law to determine enthalpy of formation
- Define lattice energy and hydration energy
-Explain relationship between heat of solution, lattice energy and hydration energy
-Draw energy cycles for dissolution of ionic compounds
-Calculate heat of solution using Born-Haber type cycles

Work through energy cycle for formation of CO from carbon and oxygen using combustion data. Draw cycle showing Route 1 (direct combustion) and Route 2 (formation then combustion). Calculate ΔH°f(CO) = ΔH°c(C) - ΔH°c(CO). Practice with additional examples including ethanol formation.
Explain dissolution of NaCl: first lattice breaks (endothermic), then ions hydrate (exothermic). Define lattice energy as energy to form ionic solid from gaseous ions. Define hydration energy as energy when gaseous ions become hydrated. Draw energy cycle: ΔH(solution) = ΔH(lattice) + ΔH(hydration). Calculate for NaCl.

Graph paper, energy cycle templates, combustion data tables, calculators
Worked examples, combustion data, calculators, step-by-step calculation sheets
Energy cycle diagrams, lattice energy and hydration energy data tables, calculators

KLB Secondary Chemistry Form 4, Pages 52-54
KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Factors Affecting Lattice and Hydration Energies
Definition and Types of Fuels

By the end of the lesson, the learner should be able to:
- Explain factors affecting lattice energy
-Explain factors affecting hydration energy
-Use data tables to identify trends
-Calculate enthalpies of solution for various ionic compounds

Analyze data tables showing lattice energies (Table 2.7) and hydration energies (Table 2.6). Identify trends: smaller ions and higher charges give larger lattice energies and hydration energies. Calculate heat of solution for MgCl₂ using: ΔH(solution) = +2489 + (-1891 + 2×(-384)) = -170 kJ/mol. Practice with other compounds.

Data tables from textbook, calculators, trend analysis exercises
Examples of different fuels, classification charts, pictures of fuel types

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Heating Values of Fuels
Factors in Fuel Selection

By the end of the lesson, the learner should be able to:
- Define heating value of a fuel
-Calculate heating values from molar enthalpies of combustion
-Compare heating values of different fuels
-Explain units of heating value (kJ/g)

Calculate heating value of ethanol: ΔH°c = -1360 kJ/mol, Molar mass = 46 g/mol, Heating value = 1360/46 = 30 kJ/g. Compare heating values from Table 2.8: methane (55 kJ/g), fuel oil (45 kJ/g), charcoal (33 kJ/g), wood (17 kJ/g). Discuss significance of these values for fuel selection.

Heating value data table, calculators, fuel comparison charts
Fuel comparison tables, local fuel availability data, cost analysis sheets

KLB Secondary Chemistry Form 4, Pages 56-57

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Environmental Effects of Fuels

By the end of the lesson, the learner should be able to:
- Identify environmental effects of burning fuels
-Explain formation and effects of acid rain
-Describe contribution to global warming
-State measures to reduce pollution from fuels

Discuss pollutants from fossil fuels: SO₂, SO₃, CO, NO₂ causing acid rain. Effects: damage to buildings, corrosion, acidification of lakes, soil leaching. CO₂ and hydrocarbons cause global warming leading to ice melting, climate change. Pollution reduction measures: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels.

Pictures of environmental damage, pollution data, examples of clean technology

KLB Secondary Chemistry Form 4, Pages 57-58

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Fuel Safety and Precautions
Endothermic and Exothermic Reactions
Bond Breaking, Formation and Phase Changes
Determination of Enthalpy of Solution

By the end of the lesson, the learner should be able to:
- State precautions necessary when using fuels
-Explain safety measures for different fuel types
-Identify hazards associated with improper fuel handling
-Apply safety principles to local situations
- Explain that energy changes are due to bond breaking and bond formation
-Investigate energy changes when solids and liquids are heated
-Define latent heat of fusion and vaporization
-Calculate energy changes using bond energies

Discuss safety precautions: ventilation for charcoal stoves (CO poisoning), not running engines in closed garages, proper gas cylinder storage, fuel storage away from populated areas, keeping away from fuel spills. Relate to local situations and accidents. Students identify potential hazards in their environment.
Class experiment: Heat ice to melting then boiling, record temperature every minute. Plot heating curve. Explain constant temperature periods. Define latent heat of fusion/vaporization. Calculate energy changes in H₂ + Cl₂ → 2HCl using bond energies. Apply formula: ΔH = Energy absorbed - Energy released.

Safety guideline charts, examples of fuel accidents, local safety case studies
250ml plastic beakers, tissue paper, NH₄NO₃, NaOH pellets, distilled water, thermometers, calculators
Ice, glass beakers, thermometers, heating source, graph paper, bond energy data tables
2.0g samples of NH₄NO₃ and NaOH, plastic beakers, thermometers, analytical balance, calculators

KLB Secondary Chemistry Form 4, Pages 57-58
KLB Secondary Chemistry Form 4, Pages 32-36

REACTION RATES AND REVERSIBLE REACTIONS

Definition of Reaction Rate and Collision Theory

By the end of the lesson, the learner should be able to:
- Define rate of reaction and explain the term activation energy
-Describe collision theory and explain why not all collisions result in products
-Draw energy diagrams showing activation energy
-Explain how activation energy affects reaction rates

Q/A: Compare speeds of different reactions (precipitation vs rusting). Define reaction rate as "measure of how much reactants are consumed or products formed per unit time." Introduce collision theory: particles must collide with minimum energy (activation energy) for successful reaction. Draw energy diagram showing activation energy barrier. Discuss factors affecting collision frequency and energy.

Examples of fast/slow reactions, energy diagram templates, chalk/markers for diagrams

KLB Secondary Chemistry Form 4, Pages 64-65

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Concentration on Reaction Rate
Change of Reaction Rate with Time

By the end of the lesson, the learner should be able to:
- Explain the effect of concentration on reaction rates
-Investigate reaction of magnesium with different concentrations of sulphuric acid
-Illustrate reaction rates graphically and interpret experimental data
-Calculate concentrations and plot graphs of concentration vs time

Class experiment: Label 4 conical flasks A-D. Add 40cm³ of 2M H₂SO₄ to A, dilute others with water (30+10, 20+20, 10+30 cm³). Drop 2cm magnesium ribbon into each, time complete dissolution. Record in Table 3.1. Calculate concentrations, plot graph. Explain: higher concentration → more collisions → faster reaction.

4 conical flasks, 2M H₂SO₄, distilled water, magnesium ribbon, stopwatch, measuring cylinders, graph paper
0.5M HCl, magnesium ribbon, conical flask, gas collection apparatus, graduated syringe, stopwatch, graph paper

KLB Secondary Chemistry Form 4, Pages 65-67

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Temperature on Reaction Rate
Effect of Surface Area on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of temperature on reaction rates
-Investigate temperature effects using sodium thiosulphate and HCl
-Plot graphs of time vs temperature and 1/time vs temperature
-Apply collision theory to explain temperature effects

Class experiment: Place 30cm³ of 0.15M Na₂S₂O₃ in flasks at room temp, 30°C, 40°C, 50°C, 60°C. Mark cross on paper under flask. Add 5cm³ of 2M HCl, time until cross disappears. Record in Table 3.4. Plot time vs temperature and 1/time vs temperature graphs. Explain: higher temperature → more kinetic energy → more effective collisions.

0.15M Na₂S₂O₃, 2M HCl, conical flasks, water baths at different temperatures, paper with cross marked, stopwatch, thermometers
Marble chips, marble powder, 1M HCl, gas collection apparatus, balance, conical flasks, measuring cylinders, graph paper

KLB Secondary Chemistry Form 4, Pages 70-73

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Catalysts on Reaction Rate
Effect of Light and Pressure on Reaction Rate
Reversible Reactions

By the end of the lesson, the learner should be able to:
- Explain effects of suitable catalysts on reaction rates
-Investigate decomposition of hydrogen peroxide with and without catalyst
-Define catalyst and explain how catalysts work
-Compare activation energies in catalyzed vs uncatalyzed reactions
- State examples of simple reversible reactions
-Investigate heating of hydrated copper(II) sulphate
-Write equations for reversible reactions using double arrows
-Distinguish between reversible and irreversible reactions

Class experiment: Decompose 5cm³ of 20-volume H₂O₂ in 45cm³ water without catalyst, collect O₂ gas. Repeat adding 2g MnO₂ powder. Record gas volumes as in Fig 3.12. Compare rates and final mass of MnO₂. Write equation: 2H₂O₂ → 2H₂O + O₂. Define catalyst and explain how it lowers activation energy. Show energy diagrams for both pathways.
Class experiment: Heat CuSO₄·5H₂O crystals in boiling tube A, collect liquid in tube B as in Fig 3.15. Observe color changes: blue → white + colorless liquid. Pour liquid back into tube A, observe return to blue. Write equation with double arrows: CuSO₄·5H₂O ⇌ CuSO₄ + 5H₂O. Give other examples: NH₄Cl ⇌ NH₃ + HCl. Compare with irreversible reactions.

20-volume H₂O₂, MnO₂ powder, gas collection apparatus, balance, conical flasks, filter paper, measuring cylinders
0.1M KBr, 0.05M AgNO₃, test tubes, dark cupboard, direct light source, examples of photochemical reactions
CuSO₄·5H₂O crystals, boiling tubes, delivery tube, heating source, test tube holder

KLB Secondary Chemistry Form 4, Pages 76-78
KLB Secondary Chemistry Form 4, Pages 78-80

REACTION RATES AND REVERSIBLE REACTIONS

Chemical Equilibrium
Le Chatelier's Principle and Effect of Concentration

By the end of the lesson, the learner should be able to:
- Explain chemical equilibrium
-Define dynamic equilibrium
-Investigate acid-base equilibrium using indicators
-Explain why equilibrium appears static but is actually dynamic

Experiment: Add 0.5M NaOH to 2cm³ in boiling tube with universal indicator. Add 0.5M HCl dropwise until green color (neutralization point). Continue adding base then acid alternately, observe color changes. Explain equilibrium as state where forward and backward reaction rates are equal. Use NH₄Cl ⇌ NH₃ + HCl example to show dynamic nature. Introduce equilibrium symbol ⇌.

0.5M NaOH, 0.5M HCl, universal indicator, boiling tubes, droppers, examples of equilibrium systems
Bromine water, 2M NaOH, 2M HCl, beakers, chromate/dichromate solutions for demonstration

KLB Secondary Chemistry Form 4, Pages 80-82

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Pressure and Temperature on Equilibrium
Industrial Applications - Haber Process
Industrial Applications - Contact Process

By the end of the lesson, the learner should be able to:
- Explain effect of pressure changes on equilibrium
-Explain effect of temperature changes on equilibrium
-Investigate NO₂/N₂O₄ equilibrium with temperature
-Apply Le Chatelier's Principle to industrial processes

Teacher demonstration: React copper turnings with concentrated HNO₃ to produce NO₂ gas in test tube. Heat and cool the tube, observe color changes: brown ⇌ pale yellow representing 2NO₂ ⇌ N₂O₄. Explain pressure effects using molecule count. Show Table 3.7 with pressure effects. Discuss temperature effects: heating favors endothermic direction, cooling favors exothermic direction. Use Table 3.8.

Copper turnings, concentrated HNO₃, test tubes, heating source, ice bath, gas collection apparatus, safety equipment
Haber Process flow diagram, equilibrium data showing temperature/pressure effects on NH₃ yield, industrial catalyst information
Contact Process flow diagram, comparison table with Haber Process, catalyst effectiveness data

KLB Secondary Chemistry Form 4, Pages 84-87