ORGANIC CHEMISTRY II

Introduction to Alkanols and Nomenclature

By the end of the lesson, the learner should be able to:
Define alkanols and identify functional group
- Apply nomenclature rules for alkanols
- Draw structural formulae of simple alkanols
- Compare alkanols with corresponding alkanes

Q/A: Review alkanes, alkenes from Form 3
- Study functional group -OH concept
- Practice naming alkanols using IUPAC rules
- Complete Table 6.2 - alkanol structures

Molecular models, Table 6.1 and 6.2, alkanol structure charts, student books

KLB Secondary Chemistry Form 4, Pages 167-170

ORGANIC CHEMISTRY II

Isomerism in Alkanols
Laboratory Preparation of Ethanol
Industrial Preparation and Physical Properties
Chemical Properties of Alkanols I

By the end of the lesson, the learner should be able to:
Explain positional and chain isomerism
- Draw isomers of given alkanols
- Name different isomeric forms
- Classify isomers as primary, secondary, or tertiary

Study positional isomerism examples (propan-1-ol vs propan-2-ol)
- Practice drawing chain isomers
- Exercises on isomer identification and naming
- Discussion on structural differences

Isomer structure charts, molecular models, practice worksheets, student books
Sugar, yeast, warm water, conical flask, delivery tube, lime water, thermometer
Table 6.3, industrial process diagrams, ethene structure models, property comparison charts
Ethanol, sodium metal, universal indicator, concentrated H₂SO₄, ethanoic acid, test tubes

KLB Secondary Chemistry Form 4, Pages 170-171

ORGANIC CHEMISTRY II

Chemical Properties of Alkanols II
Uses of Alkanols and Health Effects
Introduction to Alkanoic Acids
Laboratory Preparation of Ethanoic Acid
Physical and Chemical Properties of Alkanoic Acids

By the end of the lesson, the learner should be able to:
Investigate oxidation and esterification reactions
- Test oxidizing agents on ethanol
- Prepare esters from alkanols
- Explain dehydration reactions
Prepare ethanoic acid by oxidation
- Write equations for preparation
- Set up oxidation apparatus
- Identify product by testing

Complete Experiment 6.2: Test with acidified K₂Cr₂O₇ and KMnO₄
- Observe color changes
- Esterification with ethanoic acid
- Study dehydration conditions
Experiment 6.3: Oxidize ethanol using acidified KMnO₄
- Set up heating and distillation apparatus
- Collect distillate at 118°C
- Test product properties

Acidified potassium chromate/manganate, ethanoic acid, concentrated H₂SO₄, heating apparatus
Charts showing alkanol uses, health impact data, methylated spirit samples, discussion materials
Alkanoic acid structure charts, Table 6.5 and 6.6, molecular models, student books
Ethanol, KMnO₄, concentrated H₂SO₄, distillation apparatus, thermometer, round-bottom flask
2M ethanoic acid, universal indicator, Mg strip, Na₂CO₃, NaOH, phenolphthalein, test tubes

KLB Secondary Chemistry Form 4, Pages 173-176
KLB Secondary Chemistry Form 4, Pages 179-180

ORGANIC CHEMISTRY II

Esterification and Uses of Alkanoic Acids
Introduction to Detergents and Soap Preparation

By the end of the lesson, the learner should be able to:
Explain ester formation process
- Write esterification equations
- State uses of alkanoic acids
- Prepare simple esters

Complete esterification experiments
- Study concentrated H₂SO₄ as catalyst
- Write general esterification equation
- Discuss applications in food, drugs, synthetic fibres

Ethanoic acid, ethanol, concentrated H₂SO₄, test tubes, heating apparatus, cold water
Castor oil, 4M NaOH, NaCl, evaporating dish, water bath, stirring rod, filter paper

KLB Secondary Chemistry Form 4, Pages 182-183

ORGANIC CHEMISTRY II

Mode of Action of Soap and Hard Water Effects
Soapless Detergents and Environmental Effects

By the end of the lesson, the learner should be able to:
Explain soap molecule structure
- Describe cleaning mechanism
- Investigate hard water effects
- Compare soap performance in different waters

Study hydrophobic and hydrophilic ends
- Demonstrate micelle formation
- Test soap in distilled vs hard water
- Observe scum formation
- Write precipitation equations

Soap samples, distilled water, hard water (CaCl₂/MgSO₄ solutions), test tubes, demonstration materials
Flow charts of detergent manufacture, Table 6.9, environmental impact data, sample detergents

KLB Secondary Chemistry Form 4, Pages 186-188

ORGANIC CHEMISTRY II

Introduction to Polymers and Addition Polymerization

By the end of the lesson, the learner should be able to:
Define polymers, monomers, and polymerization
- Explain addition polymerization
- Draw polymer structures
- Calculate polymer properties

Study polymer concept and terminology
- Practice drawing addition polymers from monomers
- Examples: polyethene, polypropene, PVC
- Calculate molecular masses

Polymer samples, monomer structure charts, molecular models, calculators, polymer formation diagrams

KLB Secondary Chemistry Form 4, Pages 191-195

ORGANIC CHEMISTRY II

Addition Polymers - Types and Properties
Condensation Polymerization and Natural Polymers
Polymer Properties and Applications
Comprehensive Problem Solving and Integration

By the end of the lesson, the learner should be able to:
Identify different addition polymers
- Draw structures from monomers
- Name common polymers
- Relate structure to properties
Compare advantages and disadvantages of synthetic polymers
- State uses of different polymers
- Discuss environmental concerns
- Analyze polymer selection

Study polystyrene, PTFE, perspex formation
- Practice identifying monomers from polymer structures
- Work through polymer calculation examples
- Properties analysis
Study Table 6.10 - polymer uses
- Advantages: strength, lightness, moldability
- Disadvantages: non-biodegradability, toxic gases
- Application analysis

Various polymer samples, structure identification exercises, calculation worksheets, Table 6.10
Nylon samples, rubber samples, condensation reaction diagrams, natural polymer examples
Table 6.10, polymer application samples, environmental impact studies, product examples
Comprehensive problem sets, past examination papers, calculators, organic chemistry summary charts

KLB Secondary Chemistry Form 4, Pages 195-197
KLB Secondary Chemistry Form 4, Pages 200-201

ACIDS, BASES AND SALTS

Definition of Acids
Strength of Acids
Definition of Bases
Strength of Bases

By the end of the lesson, the learner should be able to:
- Define an acid in terms of hydrogen ions
-Investigate reactions of magnesium and zinc carbonate with different acids
-Write equations for reactions taking place
-Explain why magnesium strip should be cleaned

Class experiment: React cleaned magnesium strips with 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid. Record observations in table. Repeat using zinc carbonate. Write chemical equations. Discuss hydrogen ion displacement and gas evolution.

Magnesium strips, zinc carbonate, 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid, test tubes, test tube rack
2M HCl, 2M ethanoic acid, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes, beakers, wires
Calcium hydroxide, red litmus paper, phenolphthalein indicator, distilled water, test tubes, spatula, evaporating dish
2M NaOH, 2M ammonia solution, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes

KLB Secondary Chemistry Form 4, Pages 1-3

ACIDS, BASES AND SALTS

Acid-Base Reactions
Effect of Solvent on Acids
Effect of Solvent on Bases

By the end of the lesson, the learner should be able to:
- Write equations for acid-base reactions
-Explain neutralization process
-Identify products of acid-base reactions
-Demonstrate formation of salt and water

Q/A: Review acid and base definitions. Demonstrate neutralization reactions: HCl + NaOH, H₂SO₄ + Ca(OH)₂, HNO₃ + KOH. Write molecular and ionic equations. Explain H⁺ + OH⁻ → H₂O. Discuss salt formation. Use indicators to show neutralization point.

Various acids and bases from previous lessons, indicators, beakers, measuring cylinders, stirring rods
HCl gas, distilled water, methylbenzene, magnesium ribbon, calcium carbonate, litmus paper, test tubes, gas absorption apparatus
Dry ammonia gas, distilled water, methylbenzene, red litmus paper, test tubes, gas collection apparatus

KLB Secondary Chemistry Form 4, Pages 6-7

ACIDS, BASES AND SALTS

Amphoteric Oxides and Hydroxides
Definition of Salts and Precipitation
Solubility of Chlorides, Sulphates and Sulphites

By the end of the lesson, the learner should be able to:
- Define amphoteric oxides
-Identify some amphoteric oxides
-Investigate reactions with both acids and alkalis
-Write equations for amphoteric behavior

Class experiment: React Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂ with 2M HNO₃ and 2M NaOH. Warm mixtures. Record observations in table. Write equations showing basic and acidic behavior. Discuss dual nature of amphoteric substances.

Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂, 2M HNO₃, 2M NaOH, boiling tubes, heating source
Na₂CO₃ solution, salt solutions containing various metal ions, test tubes, droppers
2M NaCl, 2M Na₂SO₄, 2M Na₂SO₃, 0.1M salt solutions, dilute HCl, test tubes, heating source

KLB Secondary Chemistry Form 4, Pages 10-11

ACIDS, BASES AND SALTS

Complex Ions Formation
Solubility and Saturated Solutions
Effect of Temperature on Solubility

By the end of the lesson, the learner should be able to:
- Explain formation of complex ions
-Investigate reactions with excess sodium hydroxide and ammonia
-Identify metal ions that form complex ions
-Write equations for complex ion formation
- Define the term solubility
-Determine solubility of a given salt at room temperature
-Calculate mass of solute and solvent
-Express solubility in different units

Class experiment: Add NaOH dropwise then in excess to Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, Cu²⁺, Fe²⁺, Fe³⁺, Pb²⁺ solutions. Repeat with NH₃ solution. Record observations showing precipitate formation and dissolution. Write equations for complex ion formation: [Zn(OH)₄]²⁻, [Al(OH)₄]⁻, [Pb(OH)₄]²⁻, [Zn(NH₃)₄]²⁺, [Cu(NH₃)₄]²⁺.
Class experiment: Weigh evaporating dish and watch glass. Measure 20cm³ saturated KNO₃ solution. Record temperature. Evaporate to dryness carefully. Calculate masses of solute, solvent, and solution. Determine solubility per 100g water and in moles per litre. Discuss definition and significance.

2M NaOH, 2M NH₃ solution, 0.5M salt solutions, test tubes, droppers
Saturated KNO₃ solution, evaporating dish, watch glass, measuring cylinder, thermometer, balance, heating source
KClO₃, measuring cylinders, thermometer, burette, boiling tubes, heating source, graph paper

KLB Secondary Chemistry Form 4, Pages 15-16
KLB Secondary Chemistry Form 4, Pages 16-18

ACIDS, BASES AND SALTS

Solubility Curves and Applications
Fractional Crystallization

By the end of the lesson, the learner should be able to:
- Plot solubility curves for various salts
-Use solubility curves to determine mass of crystals formed
-Apply solubility curves to practical problems
-Compare solubility patterns of different salts

Using data from textbook, plot solubility curves for KNO₃, KClO₃, NaCl, CaSO₄. Calculate mass of crystals deposited when saturated solutions are cooled. Work through examples: KClO₃ cooled from 70°C to 30°C. Discuss applications in salt extraction and purification.

Graph paper, ruler, pencil, calculator, data tables from textbook
Calculator, graph paper, data tables, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 20-21

ACIDS, BASES AND SALTS

Hardness of Water - Investigation
Types and Causes of Water Hardness

By the end of the lesson, the learner should be able to:
- Determine the effects of various salt solutions on soap
-Identify cations that cause hardness
-Distinguish between hard and soft water
-Investigate effect of boiling on water hardness

Class experiment: Test soap lathering with distilled water, tap water, rainwater, and solutions of MgCl₂, NaCl, Ca(NO₃)₂, CaHCO₃, NaHCO₃, ZnSO₄. Record volumes of soap needed. Boil some solutions and retest. Compare results and identify hardness-causing ions.

Soap solution, burette, various salt solutions, conical flasks, distilled water, tap water, rainwater, heating source
Student books, examples from previous experiment, chalkboard for equations

KLB Secondary Chemistry Form 4, Pages 22-24

ACIDS, BASES AND SALTS

Effects of Hard Water

By the end of the lesson, the learner should be able to:
- State disadvantages of hard water
-State advantages of hard water
-Explain formation of scum and fur
-Discuss economic and health implications

Discussion based on practical experience: Soap wastage, scum formation on clothes, fur in kettles and pipes, pipe bursting in boilers. Advantages: calcium for bones, protection of lead pipes, use in brewing. Show examples of fur deposits. Calculate economic costs of hard water in households.

Samples of fur deposits, pictures of scaled pipes, calculator for cost analysis

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS
ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Methods of Removing Hardness I
Methods of Removing Hardness II
Endothermic and Exothermic Reactions
Enthalpy Notation and Energy Content

By the end of the lesson, the learner should be able to:
- Explain removal of hardness by boiling
-Explain removal by distillation
-Write equations for these processes
-Compare effectiveness of different methods
- Define endothermic and exothermic reactions using ΔH notation
-Investigate temperature changes when ammonium nitrate and sodium hydroxide dissolve in water
-Explain observations made during dissolution
-Draw energy level diagrams for endothermic and exothermic reactions

Demonstrate boiling method: Boil hard water samples from previous experiments and test with soap. Write equations for Ca(HCO₃)₂ and Mg(HCO₃)₂ decomposition. Discuss distillation method using apparatus setup. Compare costs and effectiveness. Explain why boiling only removes temporary hardness.
Class experiment: Wrap 250ml plastic beakers with tissue paper. Dissolve 2 spatulafuls of NH₄NO₃ in 100ml distilled water, record temperature changes. Repeat with NaOH pellets. Compare initial and final temperatures. Draw energy level diagrams showing relative energies of reactants and products.

Hard water samples, heating source, soap solution, distillation apparatus diagram
Na₂CO₃ solution, hard water samples, ion exchange resin diagram, Ca(OH)₂, NH₃ solution
250ml plastic beakers, tissue paper, rubber bands, NH₄NO₃, NaOH pellets, distilled water, thermometers, spatulas, measuring cylinders
Student books, calculators, worked examples from textbook, chalkboard for calculations

KLB Secondary Chemistry Form 4, Pages 25-26
KLB Secondary Chemistry Form 4, Pages 29-31

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Breaking and Bond Formation
Latent Heat of Fusion and Vaporization

By the end of the lesson, the learner should be able to:
- Explain that energy changes are due to bond breaking and bond formation
-Describe bond breaking as endothermic and bond formation as exothermic
-Investigate energy changes during melting and boiling
-Plot heating curves for pure substances

Class experiment: Heat crushed ice while stirring with thermometer. Record temperature every minute until ice melts completely, then continue until water boils. Plot temperature-time graph. Explain constant temperature during melting and boiling in terms of bond breaking. Discuss latent heat of fusion and vaporization.

Crushed pure ice, 250ml glass beakers, thermometers, heating source, stopwatch, graph paper, stirring rods
Data tables showing molar heats of fusion/vaporization, calculators, heating curves from previous lesson

KLB Secondary Chemistry Form 4, Pages 32-35

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Energy Calculations

By the end of the lesson, the learner should be able to:
- Calculate energy changes in reactions using bond energies
-Apply the formula: Heat of reaction = Bond breaking energy + Bond formation energy
-Determine whether reactions are exothermic or endothermic
-Use bond energy data to solve problems

Work through formation of HCl from H₂ and Cl₂ using bond energies. Calculate energy required to break H-H and Cl-Cl bonds. Calculate energy released when H-Cl bonds form. Apply formula: ΔH = Energy absorbed - Energy released. Practice with additional examples. Discuss why calculated values may differ from experimental values.

Bond energy data tables, calculators, worked examples, practice problems

KLB Secondary Chemistry Form 4, Pages 35-36

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Determination of Enthalpy of Solution I
Thermochemical Equations

By the end of the lesson, the learner should be able to:
- Determine the enthalpy changes of solution of ammonium nitrate and sodium hydroxide
-Calculate enthalpy change using ΔH = mcΔT
-Calculate number of moles of solute dissolved
-Determine molar heat of solution

Class experiment: Dissolve exactly 2.0g NH₄NO₃ in 100ml distilled water in plastic beaker. Record temperature change. Repeat with 2.0g NaOH. Calculate enthalpy changes using ΔH = mcΔT where m = 100g, c = 4.2 kJ kg⁻¹K⁻¹. Calculate moles dissolved and molar heat of solution.

250ml plastic beakers, 2.0g samples of NH₄NO₃ and NaOH, distilled water, thermometers, measuring cylinders, analytical balance, calculators
Results from previous experiment, graph paper for energy level diagrams, practice examples

KLB Secondary Chemistry Form 4, Pages 36-38

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Solution of Concentrated Sulphuric Acid
Enthalpy of Combustion
Enthalpy of Displacement
Enthalpy of Neutralization

By the end of the lesson, the learner should be able to:
- Determine heat of solution of concentrated sulphuric(VI) acid
-Apply safety precautions when handling concentrated acids
-Calculate enthalpy change considering density and purity
-Write thermochemical equation for the reaction
- Define molar heat of displacement
-Investigate displacement of copper(II) ions by zinc
-Calculate molar heat of displacement
-Explain relationship between position in reactivity series and heat of displacement

Teacher demonstration: Carefully add 2cm³ concentrated H₂SO₄ to 98cm³ distilled water in wrapped beaker (NEVER vice versa). Record temperature change. Calculate mass of acid using density (1.84 g/cm³) and purity (98%). Calculate molar heat of solution. Emphasize safety - always add acid to water.
Class experiment: Add 4.0g zinc powder to 100cm³ of 0.5M CuSO₄ solution in wrapped plastic beaker. Record temperature change and observations. Calculate moles of Zn used and Cu²⁺ displaced. Determine molar heat of displacement. Write ionic equation. Discuss why excess zinc is used. Compare with theoretical value.

Concentrated H₂SO₄, distilled water, 250ml plastic beaker, tissue paper, measuring cylinders, thermometer, safety equipment
Ethanol, small bottles with wicks, 250ml glass beakers, tripod stands, wire gauze, thermometers, analytical balance, measuring cylinders
Zinc powder, 0.5M CuSO₄ solution, 250ml plastic beakers, tissue paper, thermometers, analytical balance, stirring rods
2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, 250ml plastic beakers, tissue paper

KLB Secondary Chemistry Form 4, Pages 39-41
KLB Secondary Chemistry Form 4, Pages 44-47

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Standard Conditions and Standard Enthalpy Changes
Hess's Law - Introduction and Theory

By the end of the lesson, the learner should be able to:
- Identify standard conditions for measuring enthalpy changes
-Define standard enthalpy changes using ΔH° notation
-Explain importance of standard conditions
-Use subscripts to denote different types of enthalpy changes

Q/A: Review previous enthalpy measurements. Introduce standard conditions: 25°C (298K) and 1 atmosphere pressure (101.325 kPa). Explain ΔH° notation and subscripts (ΔH°c for combustion, ΔH°f for formation, etc.). Discuss why standard conditions are necessary for comparison. Practice using correct notation.

Student books, examples of standard enthalpy data, notation practice exercises
Energy cycle diagrams for methane formation, chalkboard illustrations, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Energy Cycle Diagrams

By the end of the lesson, the learner should be able to:
- Draw energy cycle diagrams
-Link enthalpy of formation with enthalpy of combustion
-Calculate unknown enthalpy changes using energy cycles
-Apply Hess's Law to determine enthalpy of formation

Work through energy cycle for formation of CO from carbon and oxygen using combustion data. Draw cycle showing Route 1 (direct combustion) and Route 2 (formation then combustion). Calculate ΔH°f(CO) = ΔH°c(C) - ΔH°c(CO). Practice with additional examples including ethanol formation.

Graph paper, energy cycle templates, combustion data tables, calculators

KLB Secondary Chemistry Form 4, Pages 52-54

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Hess's Law Calculations
Lattice Energy and Hydration Energy

By the end of the lesson, the learner should be able to:
- Solve complex problems using Hess's Law
-Apply energy cycles to multi-step reactions
-Calculate enthalpy of formation from combustion data
-Use thermochemical equations in Hess's Law problems

Work through detailed calculation for ethanol formation: 2C(s) + 3H₂(g) + ½O₂(g) → C₂H₅OH(l). Use combustion enthalpies of carbon (-393 kJ/mol), hydrogen (-286 kJ/mol), and ethanol (-1368 kJ/mol). Calculate ΔH°f(ethanol) = -278 kJ/mol. Practice with propane and other compounds.

Worked examples, combustion data, calculators, step-by-step calculation sheets
Energy cycle diagrams, lattice energy and hydration energy data tables, calculators

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Factors Affecting Lattice and Hydration Energies
Definition and Types of Fuels
Heating Values of Fuels
Factors in Fuel Selection

By the end of the lesson, the learner should be able to:
- Explain factors affecting lattice energy
-Explain factors affecting hydration energy
-Use data tables to identify trends
-Calculate enthalpies of solution for various ionic compounds
- Define heating value of a fuel
-Calculate heating values from molar enthalpies of combustion
-Compare heating values of different fuels
-Explain units of heating value (kJ/g)

Analyze data tables showing lattice energies (Table 2.7) and hydration energies (Table 2.6). Identify trends: smaller ions and higher charges give larger lattice energies and hydration energies. Calculate heat of solution for MgCl₂ using: ΔH(solution) = +2489 + (-1891 + 2×(-384)) = -170 kJ/mol. Practice with other compounds.
Calculate heating value of ethanol: ΔH°c = -1360 kJ/mol, Molar mass = 46 g/mol, Heating value = 1360/46 = 30 kJ/g. Compare heating values from Table 2.8: methane (55 kJ/g), fuel oil (45 kJ/g), charcoal (33 kJ/g), wood (17 kJ/g). Discuss significance of these values for fuel selection.

Data tables from textbook, calculators, trend analysis exercises
Examples of different fuels, classification charts, pictures of fuel types
Heating value data table, calculators, fuel comparison charts
Fuel comparison tables, local fuel availability data, cost analysis sheets

KLB Secondary Chemistry Form 4, Pages 54-56
KLB Secondary Chemistry Form 4, Pages 56-57

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Environmental Effects of Fuels

By the end of the lesson, the learner should be able to:
- Identify environmental effects of burning fuels
-Explain formation and effects of acid rain
-Describe contribution to global warming
-State measures to reduce pollution from fuels

Discuss pollutants from fossil fuels: SO₂, SO₃, CO, NO₂ causing acid rain. Effects: damage to buildings, corrosion, acidification of lakes, soil leaching. CO₂ and hydrocarbons cause global warming leading to ice melting, climate change. Pollution reduction measures: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels.

Pictures of environmental damage, pollution data, examples of clean technology

KLB Secondary Chemistry Form 4, Pages 57-58

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Fuel Safety and Precautions
Endothermic and Exothermic Reactions

By the end of the lesson, the learner should be able to:
- State precautions necessary when using fuels
-Explain safety measures for different fuel types
-Identify hazards associated with improper fuel handling
-Apply safety principles to local situations

Discuss safety precautions: ventilation for charcoal stoves (CO poisoning), not running engines in closed garages, proper gas cylinder storage, fuel storage away from populated areas, keeping away from fuel spills. Relate to local situations and accidents. Students identify potential hazards in their environment.

Safety guideline charts, examples of fuel accidents, local safety case studies
250ml plastic beakers, tissue paper, NH₄NO₃, NaOH pellets, distilled water, thermometers, calculators

KLB Secondary Chemistry Form 4, Pages 57-58

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Breaking, Formation and Phase Changes
Determination of Enthalpy of Solution

By the end of the lesson, the learner should be able to:
- Explain that energy changes are due to bond breaking and bond formation
-Investigate energy changes when solids and liquids are heated
-Define latent heat of fusion and vaporization
-Calculate energy changes using bond energies

Class experiment: Heat ice to melting then boiling, record temperature every minute. Plot heating curve. Explain constant temperature periods. Define latent heat of fusion/vaporization. Calculate energy changes in H₂ + Cl₂ → 2HCl using bond energies. Apply formula: ΔH = Energy absorbed - Energy released.

Ice, glass beakers, thermometers, heating source, graph paper, bond energy data tables
2.0g samples of NH₄NO₃ and NaOH, plastic beakers, thermometers, analytical balance, calculators

KLB Secondary Chemistry Form 4, Pages 32-36

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Solution of H₂SO₄ and Safety
Enthalpy of Combustion
Enthalpy of Displacement

By the end of the lesson, the learner should be able to:
- Determine heat of solution of concentrated sulphuric(VI) acid
-Apply safety precautions when handling concentrated acids
-Calculate enthalpy considering density and percentage purity
-Explain why experimental values differ from theoretical values
- Investigate enthalpy change when zinc reacts with copper(II) sulphate
-Define molar heat of displacement
-Calculate molar heat of displacement from experimental data
-Explain relationship between reactivity series and heat evolved

Teacher demonstration: Add 2cm³ concentrated H₂SO₄ to 98cm³ water (NEVER vice versa). Record temperature change. Calculate mass using density (1.84 g/cm³) and purity (98%). Calculate molar heat of solution. Emphasize safety: always add acid to water. Discuss sources of experimental error.
Class experiment: Add 4.0g zinc powder to 100cm³ of 0.5M CuSO₄. Record temperature change and observations (blue color fades, brown solid). Calculate moles and molar heat of displacement. Write ionic equation: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s). Explain why excess zinc is used.

Concentrated H₂SO₄, distilled water, plastic beaker, tissue paper, thermometer, safety equipment
Ethanol, bottles with wicks, glass beakers, tripod stands, thermometers, analytical balance
Zinc powder, 0.5M CuSO₄ solution, plastic beakers, thermometers, analytical balance

KLB Secondary Chemistry Form 4, Pages 39-41
KLB Secondary Chemistry Form 4, Pages 44-47

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Neutralization
Standard Conditions and Standard Enthalpy Changes

By the end of the lesson, the learner should be able to:
- Determine heat of neutralization of HCl with NaOH
-Define molar heat of neutralization
-Compare strong acid/base with weak acid/base combinations
-Write ionic equations including enthalpy changes

Class experiment: Mix 50cm³ of 2M HCl with 50cm³ of 2M NaOH. Record temperatures and calculate molar heat of neutralization. Repeat with weak acid/base. Compare values: strong + strong ≈ 57.2 kJ/mol, weak combinations give lower values. Write H⁺(aq) + OH⁻(aq) → H₂O(l) ΔH = -57.2 kJ mol⁻¹.

2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, plastic beakers
Student books, standard enthalpy data examples, notation practice exercises

KLB Secondary Chemistry Form 4, Pages 47-49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Hess's Law - Theory and Energy Cycles
Hess's Law Calculations

By the end of the lesson, the learner should be able to:
- State Hess's Law
-Explain that enthalpy change is independent of reaction route
-Draw energy cycle diagrams
-Apply Hess's Law to determine enthalpy of formation

Introduce Hess's Law: "Energy change in converting reactants to products is same regardless of route." Use methane formation showing Route 1 (direct combustion) vs Route 2 (formation then combustion). Draw energy cycle. Calculate ΔH°f(CH₄) = -965 + (-890) - (-75) = -75 kJ/mol. Practice with CO formation example.

Energy cycle diagrams for methane and CO formation, combustion data, calculators
Worked examples, combustion data tables, graph paper for diagrams, calculators

KLB Secondary Chemistry Form 4, Pages 49-52

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Lattice Energy and Hydration Energy
Definition and Types of Fuels

By the end of the lesson, the learner should be able to:
- Explain relationship between heat of solution, hydration and lattice energy
-Define lattice energy and hydration energy
-Draw energy cycles for dissolving ionic compounds
-Calculate heat of solution using energy cycles

Explain NaCl dissolution: lattice breaks (endothermic) then ions hydrate (exothermic). Define lattice energy as energy when ionic compound forms from gaseous ions. Define hydration energy as energy when gaseous ions become hydrated. Draw energy cycle: ΔH(solution) = ΔH(lattice) + ΔH(hydration). Calculate for NaCl: +781 + (-774) = +7 kJ/mol.

Energy cycle diagrams, hydration diagram (Fig 2.17), Tables 2.6 and 2.7 with lattice/hydration energies
Examples of local fuels, Table 2.8 showing heating values, calculators

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES
ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES
REACTION RATES AND REVERSIBLE REACTIONS

Fuel Selection Factors
Environmental Effects and Safety
Definition of Reaction Rate and Collision Theory

By the end of the lesson, the learner should be able to:
- State and explain factors that influence choice of a fuel
-Compare suitability of fuels for different purposes
-Explain fuel selection for domestic use vs specialized applications
-Apply selection criteria to local situations
- Explain environmental effects of fuels
-Describe formation and effects of acid rain
-Identify measures to reduce pollution
-State safety precautions for fuel handling

Discuss seven factors: heating value, ease of combustion, availability, transportation, storage, environmental effects, cost. Compare wood/charcoal for domestic use (cheap, available, safe, slow burning) vs methylhydrazine for rockets (rapid burning, high heat 4740 kJ/mol, easy ignition). Students analyze best fuels for their local area.
Discuss pollutants: SO₂, NO₂ forming acid rain affecting buildings, lakes, vegetation. CO₂ causing global warming and climate change. Pollution reduction: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels. Safety: ventilation for charcoal, proper gas storage, fuel storage location, avoiding spills.

Fuel comparison tables, local fuel cost data, examples of specialized fuel applications
Pictures of environmental damage, pollution reduction examples, safety guideline charts
Examples of fast/slow reactions, energy diagram templates, chalk/markers for diagrams

KLB Secondary Chemistry Form 4, Pages 57
KLB Secondary Chemistry Form 4, Pages 57-58

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Concentration on Reaction Rate
Change of Reaction Rate with Time

By the end of the lesson, the learner should be able to:
- Explain the effect of concentration on reaction rates
-Investigate reaction of magnesium with different concentrations of sulphuric acid
-Illustrate reaction rates graphically and interpret experimental data
-Calculate concentrations and plot graphs of concentration vs time

Class experiment: Label 4 conical flasks A-D. Add 40cm³ of 2M H₂SO₄ to A, dilute others with water (30+10, 20+20, 10+30 cm³). Drop 2cm magnesium ribbon into each, time complete dissolution. Record in Table 3.1. Calculate concentrations, plot graph. Explain: higher concentration → more collisions → faster reaction.

4 conical flasks, 2M H₂SO₄, distilled water, magnesium ribbon, stopwatch, measuring cylinders, graph paper
0.5M HCl, magnesium ribbon, conical flask, gas collection apparatus, graduated syringe, stopwatch, graph paper

KLB Secondary Chemistry Form 4, Pages 65-67

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Temperature on Reaction Rate
Effect of Surface Area on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of temperature on reaction rates
-Investigate temperature effects using sodium thiosulphate and HCl
-Plot graphs of time vs temperature and 1/time vs temperature
-Apply collision theory to explain temperature effects

Class experiment: Place 30cm³ of 0.15M Na₂S₂O₃ in flasks at room temp, 30°C, 40°C, 50°C, 60°C. Mark cross on paper under flask. Add 5cm³ of 2M HCl, time until cross disappears. Record in Table 3.4. Plot time vs temperature and 1/time vs temperature graphs. Explain: higher temperature → more kinetic energy → more effective collisions.

0.15M Na₂S₂O₃, 2M HCl, conical flasks, water baths at different temperatures, paper with cross marked, stopwatch, thermometers
Marble chips, marble powder, 1M HCl, gas collection apparatus, balance, conical flasks, measuring cylinders, graph paper

KLB Secondary Chemistry Form 4, Pages 70-73

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Catalysts on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain effects of suitable catalysts on reaction rates
-Investigate decomposition of hydrogen peroxide with and without catalyst
-Define catalyst and explain how catalysts work
-Compare activation energies in catalyzed vs uncatalyzed reactions

Class experiment: Decompose 5cm³ of 20-volume H₂O₂ in 45cm³ water without catalyst, collect O₂ gas. Repeat adding 2g MnO₂ powder. Record gas volumes as in Fig 3.12. Compare rates and final mass of MnO₂. Write equation: 2H₂O₂ → 2H₂O + O₂. Define catalyst and explain how it lowers activation energy. Show energy diagrams for both pathways.

20-volume H₂O₂, MnO₂ powder, gas collection apparatus, balance, conical flasks, filter paper, measuring cylinders

KLB Secondary Chemistry Form 4, Pages 76-78

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Light and Pressure on Reaction Rate
Reversible Reactions
Chemical Equilibrium
Le Chatelier's Principle and Effect of Concentration

By the end of the lesson, the learner should be able to:
- Identify reactions affected by light
-Investigate effect of light on silver bromide decomposition
-Explain effect of pressure on gaseous reactions
-Give examples of photochemical reactions
- Explain chemical equilibrium
-Define dynamic equilibrium
-Investigate acid-base equilibrium using indicators
-Explain why equilibrium appears static but is actually dynamic

Teacher demonstration: Mix KBr and AgNO₃ solutions to form AgBr precipitate. Divide into 3 test tubes: place one in dark cupboard, one on bench, one in direct sunlight. Observe color changes after 10 minutes. Write equations. Discuss photochemical reactions: photography, Cl₂ + H₂, photosynthesis. Explain pressure effects on gaseous reactions through compression.
Experiment: Add 0.5M NaOH to 2cm³ in boiling tube with universal indicator. Add 0.5M HCl dropwise until green color (neutralization point). Continue adding base then acid alternately, observe color changes. Explain equilibrium as state where forward and backward reaction rates are equal. Use NH₄Cl ⇌ NH₃ + HCl example to show dynamic nature. Introduce equilibrium symbol ⇌.

0.1M KBr, 0.05M AgNO₃, test tubes, dark cupboard, direct light source, examples of photochemical reactions
CuSO₄·5H₂O crystals, boiling tubes, delivery tube, heating source, test tube holder
0.5M NaOH, 0.5M HCl, universal indicator, boiling tubes, droppers, examples of equilibrium systems
Bromine water, 2M NaOH, 2M HCl, beakers, chromate/dichromate solutions for demonstration

KLB Secondary Chemistry Form 4, Pages 78-80
KLB Secondary Chemistry Form 4, Pages 80-82

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Pressure and Temperature on Equilibrium
Industrial Applications - Haber Process
Industrial Applications - Contact Process

By the end of the lesson, the learner should be able to:
- Explain effect of pressure changes on equilibrium
-Explain effect of temperature changes on equilibrium
-Investigate NO₂/N₂O₄ equilibrium with temperature
-Apply Le Chatelier's Principle to industrial processes

Teacher demonstration: React copper turnings with concentrated HNO₃ to produce NO₂ gas in test tube. Heat and cool the tube, observe color changes: brown ⇌ pale yellow representing 2NO₂ ⇌ N₂O₄. Explain pressure effects using molecule count. Show Table 3.7 with pressure effects. Discuss temperature effects: heating favors endothermic direction, cooling favors exothermic direction. Use Table 3.8.

Copper turnings, concentrated HNO₃, test tubes, heating source, ice bath, gas collection apparatus, safety equipment
Haber Process flow diagram, equilibrium data showing temperature/pressure effects on NH₃ yield, industrial catalyst information
Contact Process flow diagram, comparison table with Haber Process, catalyst effectiveness data

KLB Secondary Chemistry Form 4, Pages 84-87