ACIDS, BASES AND SALTS

Definition of Acids

By the end of the lesson, the learner should be able to:
- Define an acid in terms of hydrogen ions
-Investigate reactions of magnesium and zinc carbonate with different acids
-Write equations for reactions taking place
-Explain why magnesium strip should be cleaned

Class experiment: React cleaned magnesium strips with 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid. Record observations in table. Repeat using zinc carbonate. Write chemical equations. Discuss hydrogen ion displacement and gas evolution.

Magnesium strips, zinc carbonate, 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid, test tubes, test tube rack

KLB Secondary Chemistry Form 4, Pages 1-3

ACIDS, BASES AND SALTS

Strength of Acids
Definition of Bases
Strength of Bases

By the end of the lesson, the learner should be able to:
- Compare strengths of acids using pH values
-Determine strengths of acids by comparing their electrical conductivity
-Classify acids as either strong or weak
-Explain complete and partial dissociation of acids

Class experiment: Test pH of 2M HCl and 2M ethanoic acid using universal indicator. Set up electrical conductivity apparatus with both acids. Record milliammeter readings. Compare results and explain in terms of hydrogen ion concentration. Discuss strong vs weak acid definitions.

2M HCl, 2M ethanoic acid, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes, beakers, wires
Calcium hydroxide, red litmus paper, phenolphthalein indicator, distilled water, test tubes, spatula, evaporating dish
2M NaOH, 2M ammonia solution, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes

KLB Secondary Chemistry Form 4, Pages 3-5

ACIDS, BASES AND SALTS

Acid-Base Reactions
Effect of Solvent on Acids
Effect of Solvent on Bases

By the end of the lesson, the learner should be able to:
- Write equations for acid-base reactions
-Explain neutralization process
-Identify products of acid-base reactions
-Demonstrate formation of salt and water

Q/A: Review acid and base definitions. Demonstrate neutralization reactions: HCl + NaOH, H₂SO₄ + Ca(OH)₂, HNO₃ + KOH. Write molecular and ionic equations. Explain H⁺ + OH⁻ → H₂O. Discuss salt formation. Use indicators to show neutralization point.

Various acids and bases from previous lessons, indicators, beakers, measuring cylinders, stirring rods
HCl gas, distilled water, methylbenzene, magnesium ribbon, calcium carbonate, litmus paper, test tubes, gas absorption apparatus
Dry ammonia gas, distilled water, methylbenzene, red litmus paper, test tubes, gas collection apparatus

KLB Secondary Chemistry Form 4, Pages 6-7

ACIDS, BASES AND SALTS

Amphoteric Oxides and Hydroxides
Definition of Salts and Precipitation

By the end of the lesson, the learner should be able to:
- Define amphoteric oxides
-Identify some amphoteric oxides
-Investigate reactions with both acids and alkalis
-Write equations for amphoteric behavior

Class experiment: React Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂ with 2M HNO₃ and 2M NaOH. Warm mixtures. Record observations in table. Write equations showing basic and acidic behavior. Discuss dual nature of amphoteric substances.

Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂, 2M HNO₃, 2M NaOH, boiling tubes, heating source
Na₂CO₃ solution, salt solutions containing various metal ions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 10-11

ACIDS, BASES AND SALTS

Solubility of Chlorides, Sulphates and Sulphites
Complex Ions Formation

By the end of the lesson, the learner should be able to:
- Find out cations that form insoluble chlorides, sulphates and sulphites
-Write ionic equations for formation of insoluble salts
-Distinguish between sulphate and sulphite precipitates
-Investigate effect of warming on precipitates

Class experiment: Add NaCl, Na₂SO₄, Na₂SO₃ to solutions of Pb²⁺, Ba²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Al³⁺. Warm mixtures. Record observations in table. Test sulphite precipitates with dilute HCl. List soluble and insoluble salts.

2M NaCl, 2M Na₂SO₄, 2M Na₂SO₃, 0.1M salt solutions, dilute HCl, test tubes, heating source
2M NaOH, 2M NH₃ solution, 0.5M salt solutions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 14-16

ACIDS, BASES AND SALTS

Solubility and Saturated Solutions
Effect of Temperature on Solubility

By the end of the lesson, the learner should be able to:
- Define the term solubility
-Determine solubility of a given salt at room temperature
-Calculate mass of solute and solvent
-Express solubility in different units

Class experiment: Weigh evaporating dish and watch glass. Measure 20cm³ saturated KNO₃ solution. Record temperature. Evaporate to dryness carefully. Calculate masses of solute, solvent, and solution. Determine solubility per 100g water and in moles per litre. Discuss definition and significance.

Saturated KNO₃ solution, evaporating dish, watch glass, measuring cylinder, thermometer, balance, heating source
KClO₃, measuring cylinders, thermometer, burette, boiling tubes, heating source, graph paper

KLB Secondary Chemistry Form 4, Pages 16-18

ACIDS, BASES AND SALTS

Solubility Curves and Applications

By the end of the lesson, the learner should be able to:
- Plot solubility curves for various salts
-Use solubility curves to determine mass of crystals formed
-Apply solubility curves to practical problems
-Compare solubility patterns of different salts

Using data from textbook, plot solubility curves for KNO₃, KClO₃, NaCl, CaSO₄. Calculate mass of crystals deposited when saturated solutions are cooled. Work through examples: KClO₃ cooled from 70°C to 30°C. Discuss applications in salt extraction and purification.

Graph paper, ruler, pencil, calculator, data tables from textbook

KLB Secondary Chemistry Form 4, Pages 20-21

ACIDS, BASES AND SALTS

Fractional Crystallization
Hardness of Water - Investigation

By the end of the lesson, the learner should be able to:
- Define fractional crystallization
-Apply knowledge of solubility curves in separation of salts
-Calculate masses of salts that crystallize
-Explain separation of salt mixtures

Work through separation problems using solubility data for KNO₃ and KClO₃ mixtures. Calculate which salt crystallizes first when cooled from 50°C to 20°C. Plot combined solubility curves. Discuss applications in Lake Magadi and Ngomeni salt works. Solve practice problems.

Calculator, graph paper, data tables, worked examples from textbook
Soap solution, burette, various salt solutions, conical flasks, distilled water, tap water, rainwater, heating source

KLB Secondary Chemistry Form 4, Pages 21-22

ACIDS, BASES AND SALTS

Types and Causes of Water Hardness

By the end of the lesson, the learner should be able to:
- Define temporary and permanent hardness
-Explain causes of temporary hardness
-Explain causes of permanent hardness
-Write equations for decomposition of hydrogen carbonates

Q/A: Review previous experiment results. Explain temporary hardness caused by Ca(HCO₃)₂ and Mg(HCO₃)₂. Write decomposition equations when boiled. Explain permanent hardness caused by CaSO₄, MgSO₄, Ca(NO₃)₂, Mg(NO₃)₂. Discuss why permanent hardness cannot be removed by boiling.

Student books, examples from previous experiment, chalkboard for equations

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS

Effects of Hard Water
Methods of Removing Hardness I

By the end of the lesson, the learner should be able to:
- State disadvantages of hard water
-State advantages of hard water
-Explain formation of scum and fur
-Discuss economic and health implications

Discussion based on practical experience: Soap wastage, scum formation on clothes, fur in kettles and pipes, pipe bursting in boilers. Advantages: calcium for bones, protection of lead pipes, use in brewing. Show examples of fur deposits. Calculate economic costs of hard water in households.

Samples of fur deposits, pictures of scaled pipes, calculator for cost analysis
Hard water samples, heating source, soap solution, distillation apparatus diagram

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS

Methods of Removing Hardness II

By the end of the lesson, the learner should be able to:
- Explain removal using sodium carbonate
-Describe ion exchange method
-Explain removal using calcium hydroxide and ammonia
-Write equations for all processes

Demonstrate addition of Na₂CO₃ to hard water - observe precipitation. Explain ion exchange using resin (NaX) showing Ca²⁺ + 2NaX → CaX₂ + 2Na⁺. Discuss regeneration with brine. Write equations for Ca(OH)₂ and NH₃ methods. Compare all methods for effectiveness and cost.

Na₂CO₃ solution, hard water samples, ion exchange resin diagram, Ca(OH)₂, NH₃ solution

KLB Secondary Chemistry Form 4, Pages 25-26

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Endothermic and Exothermic Reactions
Enthalpy Notation and Energy Content

By the end of the lesson, the learner should be able to:
- Define endothermic and exothermic reactions using ΔH notation
-Investigate temperature changes when ammonium nitrate and sodium hydroxide dissolve in water
-Explain observations made during dissolution
-Draw energy level diagrams for endothermic and exothermic reactions

Class experiment: Wrap 250ml plastic beakers with tissue paper. Dissolve 2 spatulafuls of NH₄NO₃ in 100ml distilled water, record temperature changes. Repeat with NaOH pellets. Compare initial and final temperatures. Draw energy level diagrams showing relative energies of reactants and products.

250ml plastic beakers, tissue paper, rubber bands, NH₄NO₃, NaOH pellets, distilled water, thermometers, spatulas, measuring cylinders
Student books, calculators, worked examples from textbook, chalkboard for calculations

KLB Secondary Chemistry Form 4, Pages 29-31

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Breaking and Bond Formation

By the end of the lesson, the learner should be able to:
- Explain that energy changes are due to bond breaking and bond formation
-Describe bond breaking as endothermic and bond formation as exothermic
-Investigate energy changes during melting and boiling
-Plot heating curves for pure substances

Class experiment: Heat crushed ice while stirring with thermometer. Record temperature every minute until ice melts completely, then continue until water boils. Plot temperature-time graph. Explain constant temperature during melting and boiling in terms of bond breaking. Discuss latent heat of fusion and vaporization.

Crushed pure ice, 250ml glass beakers, thermometers, heating source, stopwatch, graph paper, stirring rods

KLB Secondary Chemistry Form 4, Pages 32-35

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Latent Heat of Fusion and Vaporization
Bond Energy Calculations

By the end of the lesson, the learner should be able to:
- Define latent heat of fusion and molar heat of fusion
-Define latent heat of vaporization and molar heat of vaporization
-Explain why temperature remains constant during phase changes
-Relate intermolecular forces to melting and boiling points

Discussion based on previous heating curve experiment. Explain energy used to overcome intermolecular forces during melting and boiling. Compare molar heats of fusion and vaporization for water and ethanol. Relate strength of intermolecular forces to magnitude of latent heats. Calculate energy required for phase changes.

Data tables showing molar heats of fusion/vaporization, calculators, heating curves from previous lesson
Bond energy data tables, calculators, worked examples, practice problems

KLB Secondary Chemistry Form 4, Pages 32-35

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Determination of Enthalpy of Solution I

By the end of the lesson, the learner should be able to:
- Determine the enthalpy changes of solution of ammonium nitrate and sodium hydroxide
-Calculate enthalpy change using ΔH = mcΔT
-Calculate number of moles of solute dissolved
-Determine molar heat of solution

Class experiment: Dissolve exactly 2.0g NH₄NO₃ in 100ml distilled water in plastic beaker. Record temperature change. Repeat with 2.0g NaOH. Calculate enthalpy changes using ΔH = mcΔT where m = 100g, c = 4.2 kJ kg⁻¹K⁻¹. Calculate moles dissolved and molar heat of solution.

250ml plastic beakers, 2.0g samples of NH₄NO₃ and NaOH, distilled water, thermometers, measuring cylinders, analytical balance, calculators

KLB Secondary Chemistry Form 4, Pages 36-38

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Thermochemical Equations
Enthalpy of Solution of Concentrated Sulphuric Acid

By the end of the lesson, the learner should be able to:
- Write thermochemical equations including enthalpy changes
-Define molar heat of solution
-Draw energy level diagrams for dissolution reactions
-Interpret thermochemical equations correctly

Using data from previous experiment, write thermochemical equations for NH₄NO₃ and NaOH dissolution. Show proper notation with state symbols and ΔH values. Draw corresponding energy level diagrams. Practice writing thermochemical equations for various reactions. Explain significance of molar quantities in equations.

Results from previous experiment, graph paper for energy level diagrams, practice examples
Concentrated H₂SO₄, distilled water, 250ml plastic beaker, tissue paper, measuring cylinders, thermometer, safety equipment

KLB Secondary Chemistry Form 4, Pages 38-39

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Combustion
Enthalpy of Displacement

By the end of the lesson, the learner should be able to:
- Define molar heat of combustion
-Determine enthalpy of combustion of ethanol experimentally
-Explain why experimental values differ from theoretical values
-Calculate molar enthalpy of combustion from experimental data

Class experiment: Burn ethanol in small bottle with wick to heat 100cm³ water in glass beaker. Record initial and final masses of bottle+ethanol and temperature change. Calculate moles of ethanol burned and heat evolved. Determine molar enthalpy of combustion. Compare with theoretical value (-1368 kJ/mol). Discuss sources of error.

Ethanol, small bottles with wicks, 250ml glass beakers, tripod stands, wire gauze, thermometers, analytical balance, measuring cylinders
Zinc powder, 0.5M CuSO₄ solution, 250ml plastic beakers, tissue paper, thermometers, analytical balance, stirring rods

KLB Secondary Chemistry Form 4, Pages 41-44

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Neutralization

By the end of the lesson, the learner should be able to:
- Define molar heat of neutralization
-Determine heat of neutralization of HCl with NaOH
-Compare neutralization enthalpies of strong and weak acids/bases
-Write ionic equations for neutralization reactions

Class experiment: Mix 50cm³ of 2M HCl with 50cm³ of 2M NaOH in wrapped beaker. Record temperature changes. Calculate molar heat of neutralization. Repeat with weak acid (ethanoic) and weak base (ammonia). Compare values. Write ionic equations. Explain why strong acid + strong base gives ~57.2 kJ/mol.

2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, 250ml plastic beakers, tissue paper

KLB Secondary Chemistry Form 4, Pages 47-49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Standard Conditions and Standard Enthalpy Changes
Hess's Law - Introduction and Theory

By the end of the lesson, the learner should be able to:
- Identify standard conditions for measuring enthalpy changes
-Define standard enthalpy changes using ΔH° notation
-Explain importance of standard conditions
-Use subscripts to denote different types of enthalpy changes

Q/A: Review previous enthalpy measurements. Introduce standard conditions: 25°C (298K) and 1 atmosphere pressure (101.325 kPa). Explain ΔH° notation and subscripts (ΔH°c for combustion, ΔH°f for formation, etc.). Discuss why standard conditions are necessary for comparison. Practice using correct notation.

Student books, examples of standard enthalpy data, notation practice exercises
Energy cycle diagrams for methane formation, chalkboard illustrations, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Energy Cycle Diagrams

By the end of the lesson, the learner should be able to:
- Draw energy cycle diagrams
-Link enthalpy of formation with enthalpy of combustion
-Calculate unknown enthalpy changes using energy cycles
-Apply Hess's Law to determine enthalpy of formation

Work through energy cycle for formation of CO from carbon and oxygen using combustion data. Draw cycle showing Route 1 (direct combustion) and Route 2 (formation then combustion). Calculate ΔH°f(CO) = ΔH°c(C) - ΔH°c(CO). Practice with additional examples including ethanol formation.

Graph paper, energy cycle templates, combustion data tables, calculators

KLB Secondary Chemistry Form 4, Pages 52-54

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Hess's Law Calculations
Lattice Energy and Hydration Energy

By the end of the lesson, the learner should be able to:
- Solve complex problems using Hess's Law
-Apply energy cycles to multi-step reactions
-Calculate enthalpy of formation from combustion data
-Use thermochemical equations in Hess's Law problems

Work through detailed calculation for ethanol formation: 2C(s) + 3H₂(g) + ½O₂(g) → C₂H₅OH(l). Use combustion enthalpies of carbon (-393 kJ/mol), hydrogen (-286 kJ/mol), and ethanol (-1368 kJ/mol). Calculate ΔH°f(ethanol) = -278 kJ/mol. Practice with propane and other compounds.

Worked examples, combustion data, calculators, step-by-step calculation sheets
Energy cycle diagrams, lattice energy and hydration energy data tables, calculators

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Factors Affecting Lattice and Hydration Energies

By the end of the lesson, the learner should be able to:
- Explain factors affecting lattice energy
-Explain factors affecting hydration energy
-Use data tables to identify trends
-Calculate enthalpies of solution for various ionic compounds

Analyze data tables showing lattice energies (Table 2.7) and hydration energies (Table 2.6). Identify trends: smaller ions and higher charges give larger lattice energies and hydration energies. Calculate heat of solution for MgCl₂ using: ΔH(solution) = +2489 + (-1891 + 2×(-384)) = -170 kJ/mol. Practice with other compounds.

Data tables from textbook, calculators, trend analysis exercises

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Definition and Types of Fuels
Heating Values of Fuels

By the end of the lesson, the learner should be able to:
- Define a fuel
-Classify fuels as solid, liquid, or gaseous
-State examples of each type of fuel
-Explain energy conversion in fuel combustion

Q/A: List fuels used at home and school. Define fuel as "substance that produces useful energy when it undergoes chemical or nuclear reaction." Classify examples: solids (coal, charcoal, wood), liquids (petrol, kerosene, diesel), gases (natural gas, biogas, LPG). Discuss energy conversions during combustion.

Examples of different fuels, classification charts, pictures of fuel types
Heating value data table, calculators, fuel comparison charts

KLB Secondary Chemistry Form 4, Pages 56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Factors in Fuel Selection

By the end of the lesson, the learner should be able to:
- State factors that influence choice of fuel
-Explain why different fuels are chosen for different purposes
-Compare advantages and disadvantages of various fuels
-Apply selection criteria to real situations

Discuss seven factors: heating value, ease of combustion, availability, transportation, storage, environmental effects, cost. Compare wood/charcoal for domestic use vs methylhydrazine for rockets. Analyze why each is suitable for its purpose. Students suggest best fuels for cooking, heating, transport in their area.

Fuel comparison tables, local fuel availability data, cost analysis sheets

KLB Secondary Chemistry Form 4, Pages 57

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Environmental Effects of Fuels
Fuel Safety and Precautions

By the end of the lesson, the learner should be able to:
- Identify environmental effects of burning fuels
-Explain formation and effects of acid rain
-Describe contribution to global warming
-State measures to reduce pollution from fuels

Discuss pollutants from fossil fuels: SO₂, SO₃, CO, NO₂ causing acid rain. Effects: damage to buildings, corrosion, acidification of lakes, soil leaching. CO₂ and hydrocarbons cause global warming leading to ice melting, climate change. Pollution reduction measures: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels.

Pictures of environmental damage, pollution data, examples of clean technology
Safety guideline charts, examples of fuel accidents, local safety case studies

KLB Secondary Chemistry Form 4, Pages 57-58

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Endothermic and Exothermic Reactions
Bond Breaking, Formation and Phase Changes

By the end of the lesson, the learner should be able to:
- Define endothermic and exothermic reactions using the ΔH notation
-Investigate what happens when ammonium nitrate and sodium hydroxide are separately dissolved in water
-Define enthalpy and enthalpy change
-Calculate enthalpy changes using ΔH = H(products) - H(reactants)

Class experiment: Dissolve NH₄NO₃ and NaOH separately in water, record temperature changes in Table 2.1. Explain heat absorption vs evolution. Introduce enthalpy (H) and enthalpy change (ΔH). Calculate enthalpy changes from experimental data. Draw energy level diagrams showing relative energies.

250ml plastic beakers, tissue paper, NH₄NO₃, NaOH pellets, distilled water, thermometers, calculators
Ice, glass beakers, thermometers, heating source, graph paper, bond energy data tables

KLB Secondary Chemistry Form 4, Pages 29-32

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Determination of Enthalpy of Solution

By the end of the lesson, the learner should be able to:
- Carry out experiments to determine enthalpy changes of solution
-Calculate enthalpy change using ΔH = mcΔT
-Write correct thermochemical equations
-Define molar heat of solution

Class experiment: Dissolve exactly 2.0g NH₄NO₃ and 2.0g NaOH separately in 100ml water. Record temperature changes. Calculate enthalpy changes using ΔH = mcΔT. Calculate moles and molar heat of solution. Write thermochemical equations: NH₄NO₃(s) + aq → NH₄NO₃(aq) ΔH = +25.2 kJ mol⁻¹.

2.0g samples of NH₄NO₃ and NaOH, plastic beakers, thermometers, analytical balance, calculators

KLB Secondary Chemistry Form 4, Pages 36-39

REACTION RATES AND REVERSIBLE REACTIONS

Definition of Reaction Rate and Collision Theory
Effect of Concentration on Reaction Rate

By the end of the lesson, the learner should be able to:
- Define rate of reaction and explain the term activation energy
-Describe collision theory and explain why not all collisions result in products
-Draw energy diagrams showing activation energy
-Explain how activation energy affects reaction rates

Q/A: Compare speeds of different reactions (precipitation vs rusting). Define reaction rate as "measure of how much reactants are consumed or products formed per unit time." Introduce collision theory: particles must collide with minimum energy (activation energy) for successful reaction. Draw energy diagram showing activation energy barrier. Discuss factors affecting collision frequency and energy.

Examples of fast/slow reactions, energy diagram templates, chalk/markers for diagrams
4 conical flasks, 2M H₂SO₄, distilled water, magnesium ribbon, stopwatch, measuring cylinders, graph paper

KLB Secondary Chemistry Form 4, Pages 64-65

REACTION RATES AND REVERSIBLE REACTIONS

Change of Reaction Rate with Time

By the end of the lesson, the learner should be able to:
- Describe methods used to measure rate of reaction
-Investigate how reaction rate changes as reaction proceeds
-Plot graphs of volume of gas vs time
-Calculate average rates at different time intervals

Class experiment: React 2cm magnesium ribbon with 100cm³ of 0.5M HCl in conical flask. Collect H₂ gas in graduated syringe as in Fig 3.4. Record gas volume every 30 seconds for 5 minutes in Table 3.2. Plot volume vs time graph. Calculate average rates between time intervals. Explain why rate decreases as reactants are consumed.

0.5M HCl, magnesium ribbon, conical flask, gas collection apparatus, graduated syringe, stopwatch, graph paper

KLB Secondary Chemistry Form 4, Pages 67-70

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Temperature on Reaction Rate
Effect of Surface Area on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of temperature on reaction rates
-Investigate temperature effects using sodium thiosulphate and HCl
-Plot graphs of time vs temperature and 1/time vs temperature
-Apply collision theory to explain temperature effects

Class experiment: Place 30cm³ of 0.15M Na₂S₂O₃ in flasks at room temp, 30°C, 40°C, 50°C, 60°C. Mark cross on paper under flask. Add 5cm³ of 2M HCl, time until cross disappears. Record in Table 3.4. Plot time vs temperature and 1/time vs temperature graphs. Explain: higher temperature → more kinetic energy → more effective collisions.

0.15M Na₂S₂O₃, 2M HCl, conical flasks, water baths at different temperatures, paper with cross marked, stopwatch, thermometers
Marble chips, marble powder, 1M HCl, gas collection apparatus, balance, conical flasks, measuring cylinders, graph paper

KLB Secondary Chemistry Form 4, Pages 70-73

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Catalysts on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain effects of suitable catalysts on reaction rates
-Investigate decomposition of hydrogen peroxide with and without catalyst
-Define catalyst and explain how catalysts work
-Compare activation energies in catalyzed vs uncatalyzed reactions

Class experiment: Decompose 5cm³ of 20-volume H₂O₂ in 45cm³ water without catalyst, collect O₂ gas. Repeat adding 2g MnO₂ powder. Record gas volumes as in Fig 3.12. Compare rates and final mass of MnO₂. Write equation: 2H₂O₂ → 2H₂O + O₂. Define catalyst and explain how it lowers activation energy. Show energy diagrams for both pathways.

20-volume H₂O₂, MnO₂ powder, gas collection apparatus, balance, conical flasks, filter paper, measuring cylinders

KLB Secondary Chemistry Form 4, Pages 76-78

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Light and Pressure on Reaction Rate
Reversible Reactions

By the end of the lesson, the learner should be able to:
- Identify reactions affected by light
-Investigate effect of light on silver bromide decomposition
-Explain effect of pressure on gaseous reactions
-Give examples of photochemical reactions

Teacher demonstration: Mix KBr and AgNO₃ solutions to form AgBr precipitate. Divide into 3 test tubes: place one in dark cupboard, one on bench, one in direct sunlight. Observe color changes after 10 minutes. Write equations. Discuss photochemical reactions: photography, Cl₂ + H₂, photosynthesis. Explain pressure effects on gaseous reactions through compression.

0.1M KBr, 0.05M AgNO₃, test tubes, dark cupboard, direct light source, examples of photochemical reactions
CuSO₄·5H₂O crystals, boiling tubes, delivery tube, heating source, test tube holder

KLB Secondary Chemistry Form 4, Pages 78-80

REACTION RATES AND REVERSIBLE REACTIONS

Chemical Equilibrium

By the end of the lesson, the learner should be able to:
- Explain chemical equilibrium
-Define dynamic equilibrium
-Investigate acid-base equilibrium using indicators
-Explain why equilibrium appears static but is actually dynamic

Experiment: Add 0.5M NaOH to 2cm³ in boiling tube with universal indicator. Add 0.5M HCl dropwise until green color (neutralization point). Continue adding base then acid alternately, observe color changes. Explain equilibrium as state where forward and backward reaction rates are equal. Use NH₄Cl ⇌ NH₃ + HCl example to show dynamic nature. Introduce equilibrium symbol ⇌.

0.5M NaOH, 0.5M HCl, universal indicator, boiling tubes, droppers, examples of equilibrium systems

KLB Secondary Chemistry Form 4, Pages 80-82

REACTION RATES AND REVERSIBLE REACTIONS

Le Chatelier's Principle and Effect of Concentration
Effect of Pressure and Temperature on Equilibrium

By the end of the lesson, the learner should be able to:
- State Le Chatelier's Principle
-Explain effect of concentration changes on equilibrium position
-Investigate bromine water equilibrium with acid/base addition
-Apply Le Chatelier's Principle to predict equilibrium shifts

Experiment: Add 2M NaOH dropwise to 20cm³ bromine water until colorless. Then add 2M HCl until excess, observe color return. Write equation: Br₂ + H₂O ⇌ HBr + HBrO. Explain Le Chatelier's Principle: "When change applied to system at equilibrium, system moves to oppose that change." Demonstrate with chromate/dichromate equilibrium: CrO₄²⁻ + H⁺ ⇌ Cr₂O₇²⁻ + H₂O.

Bromine water, 2M NaOH, 2M HCl, beakers, chromate/dichromate solutions for demonstration
Copper turnings, concentrated HNO₃, test tubes, heating source, ice bath, gas collection apparatus, safety equipment

KLB Secondary Chemistry Form 4, Pages 82-84

REACTION RATES AND REVERSIBLE REACTIONS

Industrial Applications - Haber Process

By the end of the lesson, the learner should be able to:
- Apply equilibrium principles to Haber Process
-Explain optimum conditions for ammonia manufacture
-Calculate effect of temperature and pressure on yield
-Explain role of catalysts in industrial processes

Analyze Haber Process: N₂ + 3H₂ ⇌ 2NH₃ ΔH = -92 kJ/mol. Apply Le Chatelier's Principle: high pressure favors forward reaction (4 molecules → 2 molecules), low temperature favors exothermic forward reaction but slows rate. Explain optimum conditions: 450°C temperature, 200 atmospheres pressure, iron catalyst. Discuss removal of NH₃ to shift equilibrium right. Economic considerations.

Haber Process flow diagram, equilibrium data showing temperature/pressure effects on NH₃ yield, industrial catalyst information

KLB Secondary Chemistry Form 4, Pages 87-89

REACTION RATES AND REVERSIBLE REACTIONS
ELECTROCHEMISTRY
ELECTROCHEMISTRY
ELECTROCHEMISTRY

Industrial Applications - Contact Process
Redox Reactions and Oxidation Numbers
Oxidation Numbers in Naming and Redox Identification
Displacement Reactions - Metals and Halogens

By the end of the lesson, the learner should be able to:
- Apply equilibrium principles to Contact Process
-Explain optimum conditions for sulphuric acid manufacture
-Compare different industrial equilibrium processes
-Evaluate economic factors in industrial chemistry

Analyze Contact Process: 2SO₂ + O₂ ⇌ 2SO₃ ΔH = -197 kJ/mol. Apply principles: high pressure favors forward reaction (3 molecules → 2 molecules), low temperature favors exothermic reaction. Explain optimum conditions: 450°C, atmospheric pressure, V₂O₅ catalyst, 96% conversion. Compare with Haber Process. Discuss catalyst choice and economic factors.

Contact Process flow diagram, comparison table with Haber Process, catalyst effectiveness data
Iron filings, 1M CuSO₄, 1M FeSO₄, 2M NaOH, 20V H₂O₂, test tubes
Compound charts, calculators, student books, practice exercises
Various metals (Ca, Mg, Zn, Fe, Pb, Cu), metal salt solutions, halogens (Cl₂, Br₂, I₂), halide solutions

KLB Secondary Chemistry Form 4, Pages 89

ELECTROCHEMISTRY

Electrochemical Cells and Cell Diagrams
Standard Electrode Potentials
Calculating Cell EMF and Predicting Reactions

By the end of the lesson, the learner should be able to:
Define electrode potential and EMF
- Describe electrochemical cell components
- Draw cell diagrams using correct notation
- Explain electron flow and salt bridge function

Experiment 4.5: Set up Zn/Cu cell and other metal combinations
- Measure EMF values
- Practice writing cell notation
- Learn conventional representation methods

Metal electrodes, 1M metal salt solutions, voltmeters, salt bridges, connecting wires
Standard electrode potential table, diagrams, charts showing standard conditions
Calculators, electrode potential data, worked examples, practice problems

KLB Secondary Chemistry Form 4, Pages 123-128

ELECTROCHEMISTRY

Types of Electrochemical Cells
Electrolysis of Aqueous Solutions I
Electrolysis of Aqueous Solutions II

By the end of the lesson, the learner should be able to:
Describe functioning of primary and secondary cells
- Compare different cell types
- Explain fuel cell operation
- State applications of electrochemical cells

Study dry cell (Le Clanche) and lead-acid accumulator
- Hydrogen-oxygen fuel cell operation
- Compare cell types and applications
- Discussion on advantages/disadvantages

Cell diagrams, sample batteries, charts showing cell applications
Dilute and concentrated NaCl solutions, carbon electrodes, gas collection tubes, test equipment
U-tube apparatus, 2M H₂SO₄, 0.5M MgSO₄, platinum/carbon electrodes, gas syringes

KLB Secondary Chemistry Form 4, Pages 138-141

ELECTROCHEMISTRY

Effect of Electrode Material on Electrolysis

By the end of the lesson, the learner should be able to:
Compare inert vs reactive electrodes
- Investigate electrode dissolution
- Explain electrode selection importance
- Analyze copper purification process

Experiment 4.9: Electrolysis of CuSO₄ with carbon vs copper electrodes
- Weigh electrodes before/after
- Observe color changes
- Discussion on electrode effects

Copper and carbon electrodes, 3M CuSO₄ solution, accurate balance, beakers, connecting wires

KLB Secondary Chemistry Form 4, Pages 141-148

ELECTROCHEMISTRY

Factors Affecting Electrolysis
Applications of Electrolysis I

By the end of the lesson, the learner should be able to:
Identify factors affecting preferential discharge
- Explain electrochemical series influence
- Discuss concentration and electrode effects
- Predict electrolysis products

Review electrochemical series and discharge order
- Analysis of concentration effects on product formation
- Summary of all factors affecting electrolysis
- Practice prediction problems

Electrochemical series chart, summary tables, practice exercises, student books
Iron nails, copper electrodes, CuSO₄ solution, power supply, industrial process diagrams

KLB Secondary Chemistry Form 4, Pages 153-155

ELECTROCHEMISTRY

Applications of Electrolysis II

By the end of the lesson, the learner should be able to:
Describe manufacture of NaOH and Cl₂ from brine
- Explain mercury cell operation
- Analyze industrial electrolysis processes
- Discuss environmental considerations

Study mercury cell for NaOH production
- Flow chart analysis of industrial processes
- Discussion on applications and environmental impact
- Purification of metals

Flow charts, mercury cell diagrams, environmental impact data, industrial case studies

KLB Secondary Chemistry Form 4, Pages 155-157

ELECTROCHEMISTRY

Faraday's Laws and Quantitative Electrolysis
Electrolysis Calculations I

By the end of the lesson, the learner should be able to:
State Faraday's laws of electrolysis
- Define Faraday constant
- Calculate mass deposited in electrolysis
- Relate electricity to amount of substance

Experiment 4.10: Quantitative electrolysis of CuSO₄
- Measure mass vs electricity passed
- Calculate Faraday constant
- Verify Faraday's laws

Accurate balance, copper electrodes, CuSO₄ solution, ammeter, timer, calculators
Calculators, worked examples, practice problems, gas volume data, Faraday constant

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY

Electrolysis Calculations II

By the end of the lesson, the learner should be able to:
Determine charge on ions from electrolysis data
- Calculate current-time relationships
- Solve complex multi-step problems
- Apply concepts to industrial situations

Complex problems: Determine ionic charges
- Current-time-mass relationships
- Multi-step calculations
- Industrial calculation examples

Calculators, complex problem sets, industrial data, student books

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY
METALS
METALS

Advanced Applications and Problem Solving
Chief Ores of Metals and General Extraction Methods
Occurrence and Extraction of Sodium

By the end of the lesson, the learner should be able to:
Solve examination-type electrochemistry problems
- Apply all concepts in integrated problems
- Analyze real-world electrochemical processes
- Practice complex calculations

Comprehensive problems combining redox, cells, and electrolysis
- Past examination questions
- Industrial case study analysis
- Advanced problem-solving techniques

Past papers, comprehensive problem sets, industrial case studies, calculators
Chart of metal ores, ore samples if available, Table 5.1, flotation apparatus demonstration
Down's cell diagram, charts showing sodium occurrence, electrode reaction equations

KLB Secondary Chemistry Form 4, Pages 108-164

METALS

Occurrence and Extraction of Aluminium I
Extraction of Aluminium II - Electrolysis
Occurrence and Extraction of Iron

By the end of the lesson, the learner should be able to:
Describe occurrence and ores of aluminium
- Explain ore concentration process
- Write equations for bauxite purification
- Describe amphoteric nature of aluminium oxide

Study aluminium occurrence and bauxite composition
- Demonstration of amphoteric properties
- Equations for bauxite dissolution in NaOH
- Discussion on impurity removal

Bauxite samples, NaOH solution, charts showing aluminium extraction steps, chemical equations
Electrolytic cell diagram, cryolite samples, graphite electrodes, energy consumption data
Blast furnace diagram, iron ore samples, coke, limestone, temperature zone charts

KLB Secondary Chemistry Form 4, Pages 142-143

METALS

Extraction of Zinc
Extraction of Lead and Copper
Physical Properties of Metals
Chemical Properties I - Reaction with Air

By the end of the lesson, the learner should be able to:
Describe zinc ores and occurrence
- Compare reduction and electrolytic methods
- Write equations for zinc extraction
- Explain lead removal process

Study zinc blende and calamine
- Compare two extraction methods
- Roasting equations and reduction process
- Discussion on electrolytic method advantages

Zinc ore samples, flow charts showing both methods, electrolytic cell diagrams
Lead and copper ore samples, extraction flow charts, electrolytic purification diagrams
Table 5.2, metal samples, conductivity apparatus, density measurement equipment
Deflagrating spoons, metal samples (Na, Al, Zn, Fe, Cu), Bunsen burners, safety equipment

KLB Secondary Chemistry Form 4, Pages 145-148

METALS

Chemical Properties II - Reaction with Water

By the end of the lesson, the learner should be able to:
Test metal reactions with cold water and steam
- Arrange metals by reactivity
- Explain aluminium's apparent unreactivity
- Write chemical equations for reactions

Experiment 5.2: Test metals with cold water and steam
- Use Table 5.4 for observations
- Test solutions with indicators
- Arrange metals in reactivity order

Metal samples, cold water, steam generator, test tubes, universal indicator, safety equipment

KLB Secondary Chemistry Form 4, Pages 154-156

METALS

Chemical Properties III - Reaction with Chlorine
Chemical Properties IV - Reaction with Acids

By the end of the lesson, the learner should be able to:
Investigate metal reactions with chlorine gas
- Write equations for chloride formation
- Compare reaction vigor
- Observe product characteristics

Experiment 5.3: React hot metals with chlorine gas (FUME CUPBOARD)
- Observe color changes and fume formation
- Record all observations
- Write balanced equations

Chlorine gas, gas jars, metal samples, tongs, deflagrating spoons, fume cupboard, safety equipment
Various acids (dilute and concentrated), metal strips, test tubes, gas collection apparatus, safety equipment

KLB Secondary Chemistry Form 4, Pages 156-157

METALS

Uses of Metals I - Sodium and Aluminium

By the end of the lesson, the learner should be able to:
State uses of sodium and its compounds
- Explain aluminium applications
- Relate properties to uses
- Describe alloy formation and uses

Discussion on sodium uses in industry
- Aluminium applications in transport and construction
- Study duralumin and other alloys
- Property-use relationships

Charts showing metal applications, alloy samples, aircraft parts, cooking vessels

KLB Secondary Chemistry Form 4, Pages 158-159

METALS

Uses of Metals II - Zinc, Copper and Iron
Steel Types and Alloys
Environmental Effects of Metal Extraction

By the end of the lesson, the learner should be able to:
Explain galvanization process
- Describe copper electrical applications
- Compare iron, steel, and cast iron uses
- Analyze alloy compositions and properties

Study galvanization and rust prevention
- Copper in electrical applications
- Different types of steel and their compositions
- Alloy property comparisons

Galvanized sheets, copper wires, steel samples, alloy composition charts, brass and bronze samples
Steel samples with different compositions, carbon content charts, specialized tools, stainless steel items
Environmental impact case studies, pollution images, NEMA regulation documents, waste management examples

KLB Secondary Chemistry Form 4, Pages 159-161