ACIDS, BASES AND SALTS

Definition of Acids

By the end of the lesson, the learner should be able to:
- Define an acid in terms of hydrogen ions
-Investigate reactions of magnesium and zinc carbonate with different acids
-Write equations for reactions taking place
-Explain why magnesium strip should be cleaned

Class experiment: React cleaned magnesium strips with 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid. Record observations in table. Repeat using zinc carbonate. Write chemical equations. Discuss hydrogen ion displacement and gas evolution.

Magnesium strips, zinc carbonate, 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid, test tubes, test tube rack

KLB Secondary Chemistry Form 4, Pages 1-3

ACIDS, BASES AND SALTS

Strength of Acids
Definition of Bases
Strength of Bases

By the end of the lesson, the learner should be able to:
- Compare strengths of acids using pH values
-Determine strengths of acids by comparing their electrical conductivity
-Classify acids as either strong or weak
-Explain complete and partial dissociation of acids

Class experiment: Test pH of 2M HCl and 2M ethanoic acid using universal indicator. Set up electrical conductivity apparatus with both acids. Record milliammeter readings. Compare results and explain in terms of hydrogen ion concentration. Discuss strong vs weak acid definitions.

2M HCl, 2M ethanoic acid, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes, beakers, wires
Calcium hydroxide, red litmus paper, phenolphthalein indicator, distilled water, test tubes, spatula, evaporating dish
2M NaOH, 2M ammonia solution, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes

KLB Secondary Chemistry Form 4, Pages 3-5

ACIDS, BASES AND SALTS

Acid-Base Reactions
Effect of Solvent on Acids
Effect of Solvent on Bases
Amphoteric Oxides and Hydroxides
Definition of Salts and Precipitation

By the end of the lesson, the learner should be able to:
- Write equations for acid-base reactions
-Explain neutralization process
-Identify products of acid-base reactions
-Demonstrate formation of salt and water
- Investigate effect of polar and non-polar solvents on ammonia gas
-Compare ammonia behavior in water vs methylbenzene
-Explain formation of ammonium hydroxide
-Write equations for ammonia dissolution in water

Q/A: Review acid and base definitions. Demonstrate neutralization reactions: HCl + NaOH, H₂SO₄ + Ca(OH)₂, HNO₃ + KOH. Write molecular and ionic equations. Explain H⁺ + OH⁻ → H₂O. Discuss salt formation. Use indicators to show neutralization point.
Class experiment: Test dry ammonia with dry litmus. Dissolve ammonia in water and test with litmus. Dissolve ammonia in methylbenzene and test with litmus. Record observations in table. Write equation for NH₃ + H₂O reaction. Explain why only aqueous ammonia shows basic properties.

Various acids and bases from previous lessons, indicators, beakers, measuring cylinders, stirring rods
HCl gas, distilled water, methylbenzene, magnesium ribbon, calcium carbonate, litmus paper, test tubes, gas absorption apparatus
Dry ammonia gas, distilled water, methylbenzene, red litmus paper, test tubes, gas collection apparatus
Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂, 2M HNO₃, 2M NaOH, boiling tubes, heating source
Na₂CO₃ solution, salt solutions containing various metal ions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 6-7
KLB Secondary Chemistry Form 4, Pages 9-10

ACIDS, BASES AND SALTS

Solubility of Chlorides, Sulphates and Sulphites

By the end of the lesson, the learner should be able to:
- Find out cations that form insoluble chlorides, sulphates and sulphites
-Write ionic equations for formation of insoluble salts
-Distinguish between sulphate and sulphite precipitates
-Investigate effect of warming on precipitates

Class experiment: Add NaCl, Na₂SO₄, Na₂SO₃ to solutions of Pb²⁺, Ba²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Al³⁺. Warm mixtures. Record observations in table. Test sulphite precipitates with dilute HCl. List soluble and insoluble salts.

2M NaCl, 2M Na₂SO₄, 2M Na₂SO₃, 0.1M salt solutions, dilute HCl, test tubes, heating source

KLB Secondary Chemistry Form 4, Pages 14-16

ACIDS, BASES AND SALTS

Complex Ions Formation

By the end of the lesson, the learner should be able to:
- Explain formation of complex ions
-Investigate reactions with excess sodium hydroxide and ammonia
-Identify metal ions that form complex ions
-Write equations for complex ion formation

Class experiment: Add NaOH dropwise then in excess to Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, Cu²⁺, Fe²⁺, Fe³⁺, Pb²⁺ solutions. Repeat with NH₃ solution. Record observations showing precipitate formation and dissolution. Write equations for complex ion formation: [Zn(OH)₄]²⁻, [Al(OH)₄]⁻, [Pb(OH)₄]²⁻, [Zn(NH₃)₄]²⁺, [Cu(NH₃)₄]²⁺.

2M NaOH, 2M NH₃ solution, 0.5M salt solutions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 15-16

ACIDS, BASES AND SALTS

Solubility and Saturated Solutions
Effect of Temperature on Solubility

By the end of the lesson, the learner should be able to:
- Define the term solubility
-Determine solubility of a given salt at room temperature
-Calculate mass of solute and solvent
-Express solubility in different units

Class experiment: Weigh evaporating dish and watch glass. Measure 20cm³ saturated KNO₃ solution. Record temperature. Evaporate to dryness carefully. Calculate masses of solute, solvent, and solution. Determine solubility per 100g water and in moles per litre. Discuss definition and significance.

Saturated KNO₃ solution, evaporating dish, watch glass, measuring cylinder, thermometer, balance, heating source
KClO₃, measuring cylinders, thermometer, burette, boiling tubes, heating source, graph paper

KLB Secondary Chemistry Form 4, Pages 16-18

ACIDS, BASES AND SALTS

Solubility Curves and Applications
Fractional Crystallization
Hardness of Water - Investigation

By the end of the lesson, the learner should be able to:
- Plot solubility curves for various salts
-Use solubility curves to determine mass of crystals formed
-Apply solubility curves to practical problems
-Compare solubility patterns of different salts
- Define fractional crystallization
-Apply knowledge of solubility curves in separation of salts
-Calculate masses of salts that crystallize
-Explain separation of salt mixtures

Using data from textbook, plot solubility curves for KNO₃, KClO₃, NaCl, CaSO₄. Calculate mass of crystals deposited when saturated solutions are cooled. Work through examples: KClO₃ cooled from 70°C to 30°C. Discuss applications in salt extraction and purification.
Work through separation problems using solubility data for KNO₃ and KClO₃ mixtures. Calculate which salt crystallizes first when cooled from 50°C to 20°C. Plot combined solubility curves. Discuss applications in Lake Magadi and Ngomeni salt works. Solve practice problems.

Graph paper, ruler, pencil, calculator, data tables from textbook
Calculator, graph paper, data tables, worked examples from textbook
Soap solution, burette, various salt solutions, conical flasks, distilled water, tap water, rainwater, heating source

KLB Secondary Chemistry Form 4, Pages 20-21
KLB Secondary Chemistry Form 4, Pages 21-22

ACIDS, BASES AND SALTS

Types and Causes of Water Hardness

By the end of the lesson, the learner should be able to:
- Define temporary and permanent hardness
-Explain causes of temporary hardness
-Explain causes of permanent hardness
-Write equations for decomposition of hydrogen carbonates

Q/A: Review previous experiment results. Explain temporary hardness caused by Ca(HCO₃)₂ and Mg(HCO₃)₂. Write decomposition equations when boiled. Explain permanent hardness caused by CaSO₄, MgSO₄, Ca(NO₃)₂, Mg(NO₃)₂. Discuss why permanent hardness cannot be removed by boiling.

Student books, examples from previous experiment, chalkboard for equations

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS

Effects of Hard Water

By the end of the lesson, the learner should be able to:
- State disadvantages of hard water
-State advantages of hard water
-Explain formation of scum and fur
-Discuss economic and health implications

Discussion based on practical experience: Soap wastage, scum formation on clothes, fur in kettles and pipes, pipe bursting in boilers. Advantages: calcium for bones, protection of lead pipes, use in brewing. Show examples of fur deposits. Calculate economic costs of hard water in households.

Samples of fur deposits, pictures of scaled pipes, calculator for cost analysis

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS

Methods of Removing Hardness I
Methods of Removing Hardness II

By the end of the lesson, the learner should be able to:
- Explain removal of hardness by boiling
-Explain removal by distillation
-Write equations for these processes
-Compare effectiveness of different methods

Demonstrate boiling method: Boil hard water samples from previous experiments and test with soap. Write equations for Ca(HCO₃)₂ and Mg(HCO₃)₂ decomposition. Discuss distillation method using apparatus setup. Compare costs and effectiveness. Explain why boiling only removes temporary hardness.

Hard water samples, heating source, soap solution, distillation apparatus diagram
Na₂CO₃ solution, hard water samples, ion exchange resin diagram, Ca(OH)₂, NH₃ solution

KLB Secondary Chemistry Form 4, Pages 25-26

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Endothermic and Exothermic Reactions
Enthalpy Notation and Energy Content

By the end of the lesson, the learner should be able to:
- Define endothermic and exothermic reactions using ΔH notation
-Investigate temperature changes when ammonium nitrate and sodium hydroxide dissolve in water
-Explain observations made during dissolution
-Draw energy level diagrams for endothermic and exothermic reactions
- Define enthalpy and enthalpy change
-Use the symbol ΔH to represent enthalpy changes
-Calculate enthalpy changes using the formula ΔH = H(products) - H(reactants)
-Distinguish between positive and negative enthalpy changes

Class experiment: Wrap 250ml plastic beakers with tissue paper. Dissolve 2 spatulafuls of NH₄NO₃ in 100ml distilled water, record temperature changes. Repeat with NaOH pellets. Compare initial and final temperatures. Draw energy level diagrams showing relative energies of reactants and products.
Q/A: Review previous experiment results. Introduce enthalpy symbol H and enthalpy change ΔH. Calculate enthalpy changes from previous experiments. Explain why endothermic reactions have positive ΔH and exothermic reactions have negative ΔH. Practice calculations with worked examples.

250ml plastic beakers, tissue paper, rubber bands, NH₄NO₃, NaOH pellets, distilled water, thermometers, spatulas, measuring cylinders
Student books, calculators, worked examples from textbook, chalkboard for calculations

KLB Secondary Chemistry Form 4, Pages 29-31
KLB Secondary Chemistry Form 4, Pages 31-32

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Breaking and Bond Formation
Latent Heat of Fusion and Vaporization

By the end of the lesson, the learner should be able to:
- Explain that energy changes are due to bond breaking and bond formation
-Describe bond breaking as endothermic and bond formation as exothermic
-Investigate energy changes during melting and boiling
-Plot heating curves for pure substances

Class experiment: Heat crushed ice while stirring with thermometer. Record temperature every minute until ice melts completely, then continue until water boils. Plot temperature-time graph. Explain constant temperature during melting and boiling in terms of bond breaking. Discuss latent heat of fusion and vaporization.

Crushed pure ice, 250ml glass beakers, thermometers, heating source, stopwatch, graph paper, stirring rods
Data tables showing molar heats of fusion/vaporization, calculators, heating curves from previous lesson

KLB Secondary Chemistry Form 4, Pages 32-35

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Bond Energy Calculations

By the end of the lesson, the learner should be able to:
- Calculate energy changes in reactions using bond energies
-Apply the formula: Heat of reaction = Bond breaking energy + Bond formation energy
-Determine whether reactions are exothermic or endothermic
-Use bond energy data to solve problems

Work through formation of HCl from H₂ and Cl₂ using bond energies. Calculate energy required to break H-H and Cl-Cl bonds. Calculate energy released when H-Cl bonds form. Apply formula: ΔH = Energy absorbed - Energy released. Practice with additional examples. Discuss why calculated values may differ from experimental values.

Bond energy data tables, calculators, worked examples, practice problems

KLB Secondary Chemistry Form 4, Pages 35-36

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Determination of Enthalpy of Solution I

By the end of the lesson, the learner should be able to:
- Determine the enthalpy changes of solution of ammonium nitrate and sodium hydroxide
-Calculate enthalpy change using ΔH = mcΔT
-Calculate number of moles of solute dissolved
-Determine molar heat of solution

Class experiment: Dissolve exactly 2.0g NH₄NO₃ in 100ml distilled water in plastic beaker. Record temperature change. Repeat with 2.0g NaOH. Calculate enthalpy changes using ΔH = mcΔT where m = 100g, c = 4.2 kJ kg⁻¹K⁻¹. Calculate moles dissolved and molar heat of solution.

250ml plastic beakers, 2.0g samples of NH₄NO₃ and NaOH, distilled water, thermometers, measuring cylinders, analytical balance, calculators

KLB Secondary Chemistry Form 4, Pages 36-38

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Thermochemical Equations
Enthalpy of Solution of Concentrated Sulphuric Acid
Enthalpy of Combustion

By the end of the lesson, the learner should be able to:
- Write thermochemical equations including enthalpy changes
-Define molar heat of solution
-Draw energy level diagrams for dissolution reactions
-Interpret thermochemical equations correctly
- Define molar heat of combustion
-Determine enthalpy of combustion of ethanol experimentally
-Explain why experimental values differ from theoretical values
-Calculate molar enthalpy of combustion from experimental data

Using data from previous experiment, write thermochemical equations for NH₄NO₃ and NaOH dissolution. Show proper notation with state symbols and ΔH values. Draw corresponding energy level diagrams. Practice writing thermochemical equations for various reactions. Explain significance of molar quantities in equations.
Class experiment: Burn ethanol in small bottle with wick to heat 100cm³ water in glass beaker. Record initial and final masses of bottle+ethanol and temperature change. Calculate moles of ethanol burned and heat evolved. Determine molar enthalpy of combustion. Compare with theoretical value (-1368 kJ/mol). Discuss sources of error.

Results from previous experiment, graph paper for energy level diagrams, practice examples
Concentrated H₂SO₄, distilled water, 250ml plastic beaker, tissue paper, measuring cylinders, thermometer, safety equipment
Ethanol, small bottles with wicks, 250ml glass beakers, tripod stands, wire gauze, thermometers, analytical balance, measuring cylinders

KLB Secondary Chemistry Form 4, Pages 38-39
KLB Secondary Chemistry Form 4, Pages 41-44

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Displacement
Enthalpy of Neutralization

By the end of the lesson, the learner should be able to:
- Define molar heat of displacement
-Investigate displacement of copper(II) ions by zinc
-Calculate molar heat of displacement
-Explain relationship between position in reactivity series and heat of displacement

Class experiment: Add 4.0g zinc powder to 100cm³ of 0.5M CuSO₄ solution in wrapped plastic beaker. Record temperature change and observations. Calculate moles of Zn used and Cu²⁺ displaced. Determine molar heat of displacement. Write ionic equation. Discuss why excess zinc is used. Compare with theoretical value.

Zinc powder, 0.5M CuSO₄ solution, 250ml plastic beakers, tissue paper, thermometers, analytical balance, stirring rods
2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, 250ml plastic beakers, tissue paper

KLB Secondary Chemistry Form 4, Pages 44-47

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Standard Conditions and Standard Enthalpy Changes

By the end of the lesson, the learner should be able to:
- Identify standard conditions for measuring enthalpy changes
-Define standard enthalpy changes using ΔH° notation
-Explain importance of standard conditions
-Use subscripts to denote different types of enthalpy changes

Q/A: Review previous enthalpy measurements. Introduce standard conditions: 25°C (298K) and 1 atmosphere pressure (101.325 kPa). Explain ΔH° notation and subscripts (ΔH°c for combustion, ΔH°f for formation, etc.). Discuss why standard conditions are necessary for comparison. Practice using correct notation.

Student books, examples of standard enthalpy data, notation practice exercises

KLB Secondary Chemistry Form 4, Pages 49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Hess's Law - Introduction and Theory

By the end of the lesson, the learner should be able to:
- State Hess's Law
-Explain the principle of energy conservation in chemical reactions
-Understand that enthalpy change is independent of reaction route
-Apply Hess's Law to simple examples

Introduce Hess's Law: "The energy change in converting reactants to products is the same regardless of the route by which the chemical change occurs." Use methane formation example to show two routes giving same overall energy change. Draw energy cycle diagrams. Explain law of conservation of energy application.

Energy cycle diagrams for methane formation, chalkboard illustrations, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 49-52

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Energy Cycle Diagrams
Hess's Law Calculations

By the end of the lesson, the learner should be able to:
- Draw energy cycle diagrams
-Link enthalpy of formation with enthalpy of combustion
-Calculate unknown enthalpy changes using energy cycles
-Apply Hess's Law to determine enthalpy of formation

Work through energy cycle for formation of CO from carbon and oxygen using combustion data. Draw cycle showing Route 1 (direct combustion) and Route 2 (formation then combustion). Calculate ΔH°f(CO) = ΔH°c(C) - ΔH°c(CO). Practice with additional examples including ethanol formation.

Graph paper, energy cycle templates, combustion data tables, calculators
Worked examples, combustion data, calculators, step-by-step calculation sheets

KLB Secondary Chemistry Form 4, Pages 52-54

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Lattice Energy and Hydration Energy
Factors Affecting Lattice and Hydration Energies

By the end of the lesson, the learner should be able to:
- Define lattice energy and hydration energy
-Explain relationship between heat of solution, lattice energy and hydration energy
-Draw energy cycles for dissolution of ionic compounds
-Calculate heat of solution using Born-Haber type cycles
- Explain factors affecting lattice energy
-Explain factors affecting hydration energy
-Use data tables to identify trends
-Calculate enthalpies of solution for various ionic compounds

Explain dissolution of NaCl: first lattice breaks (endothermic), then ions hydrate (exothermic). Define lattice energy as energy to form ionic solid from gaseous ions. Define hydration energy as energy when gaseous ions become hydrated. Draw energy cycle: ΔH(solution) = ΔH(lattice) + ΔH(hydration). Calculate for NaCl.
Analyze data tables showing lattice energies (Table 2.7) and hydration energies (Table 2.6). Identify trends: smaller ions and higher charges give larger lattice energies and hydration energies. Calculate heat of solution for MgCl₂ using: ΔH(solution) = +2489 + (-1891 + 2×(-384)) = -170 kJ/mol. Practice with other compounds.

Energy cycle diagrams, lattice energy and hydration energy data tables, calculators
Data tables from textbook, calculators, trend analysis exercises

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Definition and Types of Fuels
Heating Values of Fuels

By the end of the lesson, the learner should be able to:
- Define a fuel
-Classify fuels as solid, liquid, or gaseous
-State examples of each type of fuel
-Explain energy conversion in fuel combustion

Q/A: List fuels used at home and school. Define fuel as "substance that produces useful energy when it undergoes chemical or nuclear reaction." Classify examples: solids (coal, charcoal, wood), liquids (petrol, kerosene, diesel), gases (natural gas, biogas, LPG). Discuss energy conversions during combustion.

Examples of different fuels, classification charts, pictures of fuel types
Heating value data table, calculators, fuel comparison charts

KLB Secondary Chemistry Form 4, Pages 56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Factors in Fuel Selection

By the end of the lesson, the learner should be able to:
- State factors that influence choice of fuel
-Explain why different fuels are chosen for different purposes
-Compare advantages and disadvantages of various fuels
-Apply selection criteria to real situations

Discuss seven factors: heating value, ease of combustion, availability, transportation, storage, environmental effects, cost. Compare wood/charcoal for domestic use vs methylhydrazine for rockets. Analyze why each is suitable for its purpose. Students suggest best fuels for cooking, heating, transport in their area.

Fuel comparison tables, local fuel availability data, cost analysis sheets

KLB Secondary Chemistry Form 4, Pages 57

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Environmental Effects of Fuels

By the end of the lesson, the learner should be able to:
- Identify environmental effects of burning fuels
-Explain formation and effects of acid rain
-Describe contribution to global warming
-State measures to reduce pollution from fuels

Discuss pollutants from fossil fuels: SO₂, SO₃, CO, NO₂ causing acid rain. Effects: damage to buildings, corrosion, acidification of lakes, soil leaching. CO₂ and hydrocarbons cause global warming leading to ice melting, climate change. Pollution reduction measures: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels.

Pictures of environmental damage, pollution data, examples of clean technology

KLB Secondary Chemistry Form 4, Pages 57-58

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Fuel Safety and Precautions
Endothermic and Exothermic Reactions
Bond Breaking, Formation and Phase Changes

By the end of the lesson, the learner should be able to:
- State precautions necessary when using fuels
-Explain safety measures for different fuel types
-Identify hazards associated with improper fuel handling
-Apply safety principles to local situations
- Explain that energy changes are due to bond breaking and bond formation
-Investigate energy changes when solids and liquids are heated
-Define latent heat of fusion and vaporization
-Calculate energy changes using bond energies

Discuss safety precautions: ventilation for charcoal stoves (CO poisoning), not running engines in closed garages, proper gas cylinder storage, fuel storage away from populated areas, keeping away from fuel spills. Relate to local situations and accidents. Students identify potential hazards in their environment.
Class experiment: Heat ice to melting then boiling, record temperature every minute. Plot heating curve. Explain constant temperature periods. Define latent heat of fusion/vaporization. Calculate energy changes in H₂ + Cl₂ → 2HCl using bond energies. Apply formula: ΔH = Energy absorbed - Energy released.

Safety guideline charts, examples of fuel accidents, local safety case studies
250ml plastic beakers, tissue paper, NH₄NO₃, NaOH pellets, distilled water, thermometers, calculators
Ice, glass beakers, thermometers, heating source, graph paper, bond energy data tables

KLB Secondary Chemistry Form 4, Pages 57-58
KLB Secondary Chemistry Form 4, Pages 32-36

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES
SULPHUR AND ITS COMPOUNDS
SULPHUR AND ITS COMPOUNDS

Determination of Enthalpy of Solution
Extraction of Sulphur
Allotropes of Sulphur

By the end of the lesson, the learner should be able to:
- Carry out experiments to determine enthalpy changes of solution
-Calculate enthalpy change using ΔH = mcΔT
-Write correct thermochemical equations
-Define molar heat of solution

Class experiment: Dissolve exactly 2.0g NH₄NO₃ and 2.0g NaOH separately in 100ml water. Record temperature changes. Calculate enthalpy changes using ΔH = mcΔT. Calculate moles and molar heat of solution. Write thermochemical equations: NH₄NO₃(s) + aq → NH₄NO₃(aq) ΔH = +25.2 kJ mol⁻¹.

2.0g samples of NH₄NO₃ and NaOH, plastic beakers, thermometers, analytical balance, calculators
Charts showing periodic table, Diagram of Frasch process, Samples of sulphur compounds (pyrites, gypsum)
Powdered sulphur, Carbon(IV) sulphide, Evaporating dish, Glass rod, Hand lens, Boiling tubes, Filter paper, Beakers

KLB Secondary Chemistry Form 4, Pages 36-39

SULPHUR AND ITS COMPOUNDS

Physical Properties of Sulphur - Solubility
Physical Properties of Sulphur - Effect of Heat

By the end of the lesson, the learner should be able to:
Investigate the solubility of sulphur in different solvents. Explain the molecular structure of sulphur. Compare solubility in polar and non-polar solvents. State the physical properties of sulphur.

Practical work: Experiment 2(a) - Testing solubility of sulphur in water, benzene, methylbenzene, and carbon(IV) sulphide. Observation and recording in Table Discussion: Explain why sulphur dissolves in organic solvents but not water. Drawing: Puckered ring structure of S8 molecule.

Powdered sulphur, Water, Benzene, Methylbenzene, Carbon(IV) sulphide, Test tubes, Charts showing molecular structure
Powdered sulphur, Test tubes, Bunsen burner, Cold surface for condensation, Thermometer, Safety equipment

KLB Secondary Chemistry Form 4, Pages 163-164

SULPHUR AND ITS COMPOUNDS

Chemical Properties of Sulphur - Reactions with Elements
Chemical Properties of Sulphur - Reactions with Acids
Uses of Sulphur and Introduction to Oxides

By the end of the lesson, the learner should be able to:
Investigate the reaction of sulphur with oxygen. Investigate the reaction of sulphur with metals. Write balanced equations for reactions of sulphur. Explain the formation of sulphides.

Practical work: Experiment 3(a) - Burning sulphur in oxygen using deflagrating spoon. Testing with moist litmus paper. Practical work: Heating mixtures of sulphur with iron powder and copper powder. Observation: Exothermic reactions and color changes. Writing equations: Fe + S → FeS, 2Cu + S → Cu2S.

Sulphur, Iron powder, Copper powder, Oxygen gas jar, Deflagrating spoon, Moist litmus papers, Test tubes, Bunsen burner
Sulphur powder, Concentrated HNO3, Concentrated H2SO4, Concentrated HCl, Barium chloride solution, Test tubes, Fume cupboard access
Charts showing uses of sulphur, Samples of vulcanized rubber, Fungicides, Industrial photographs, Textbook diagrams

KLB Secondary Chemistry Form 4, Pages 165-167

SULPHUR AND ITS COMPOUNDS

Preparation of Sulphur(IV) Oxide
Physical and Chemical Properties of Sulphur(IV) Oxide
Bleaching Action of Sulphur(IV) Oxide
Reducing Action of Sulphur(IV) Oxide

By the end of the lesson, the learner should be able to:
Describe laboratory preparation of sulphur(IV) oxide. Set up apparatus for gas preparation and collection. Write balanced equations for the preparation reactions. Explain the drying and collection methods used.
Investigate the bleaching properties of SO Compare SO2 bleaching with chlorine bleaching. Explain the mechanism of SO2 bleaching. Relate bleaching to paper manufacturing.

Practical work: Experiment 4 - Preparation of SO2 using sodium sulphite and dilute HCl. Apparatus setup: Round-bottomed flask, delivery tube, gas jars. Collection: Downward delivery method. Testing: Using acidified potassium chromate(VI) paper. Alternative method: Copper + concentrated H2SO
Practical work: Experiment 6 - Placing colored flower petals in SO2 gas. Observation: Temporary bleaching effect. Discussion: SO2 + H2O → H2SO3, reduction of organic dyes. Comparison: Permanent vs temporary bleaching. Application: Paper industry bleaching processes.

Sodium sulphite, Dilute HCl, Round-bottomed flask, Delivery tubes, Gas jars, Concentrated H2SO4 for drying, Acidified potassium chromate(VI) paper
SO2 gas from previous preparation, Litmus papers, Universal indicator, 0.1M NaOH solution, Water, Test tubes, Safety equipment
Colored flower petals (red/blue), SO2 gas jars, Hand lens for observation, Charts comparing bleaching agents
SO2 gas, Acidified K2Cr2O7, Acidified KMnO4, Bromine water, Iron(III) chloride solution, Concentrated HNO3, Test tubes

KLB Secondary Chemistry Form 4, Pages 170-171
KLB Secondary Chemistry Form 4, Pages 173

SULPHUR AND ITS COMPOUNDS

Oxidising Action of Sulphur(IV) Oxide

By the end of the lesson, the learner should be able to:
Investigate SO2 as an oxidizing agent. Demonstrate reaction with stronger reducing agents. Explain the dual nature of SO Write equations for oxidation reactions by SO

Practical work: Experiment 8 - Lowering burning magnesium into SO2 gas. Observation: Continued burning, white fumes of MgO, yellow specks of sulphur. Reaction with hydrogen sulphide gas (demonstration). Discussion: SO2 decomposition providing oxygen. Writing equations: 2Mg + SO2 → 2MgO + S.

SO2 gas jars, Magnesium ribbon, Deflagrating spoon, Hydrogen sulphide gas, Water droppers, Safety equipment

KLB Secondary Chemistry Form 4, Pages 176-177

SULPHUR AND ITS COMPOUNDS

Test for Sulphate and Sulphite Ions & Uses of SO2

By the end of the lesson, the learner should be able to:
Carry out confirmatory tests for sulphate and sulphite ions. Distinguish between sulphate and sulphite using chemical tests. List the uses of sulphur(IV) oxide. Explain the applications in industry.

Practical work: Experiment 9 - Testing sodium sulphate and sodium sulphite with barium chloride. Adding dilute HCl to precipitates. Recording observations in Table 8. Discussion: BaSO4 insoluble in acid, BaSO3 dissolves. Uses: Raw material for H2SO4, bleaching wood pulp, fumigant, preservative.

Sodium sulphate solution, Sodium sulphite solution, Barium chloride solution, Dilute HCl, Test tubes, Charts showing industrial uses

KLB Secondary Chemistry Form 4, Pages 178-179

SULPHUR AND ITS COMPOUNDS

Large-scale Manufacture of Sulphuric(VI) Acid - Contact Process
Properties of Concentrated Sulphuric(VI) Acid - Dehydrating Properties

By the end of the lesson, the learner should be able to:
Describe the contact process for manufacturing H2SO Identify raw materials and conditions used. Explain the role of catalyst in the process. Draw flow diagrams of the contact process.

Study of flow diagram: Figure 12 - Contact process. Discussion: Raw materials (sulphur, air), burning sulphur to SO Purification: Electrostatic precipitation, drying with H2SO Catalytic chamber: V2O5 catalyst at 450°C, 2-3 atmospheres. Formation of oleum: H2S2O7. Safety and environmental considerations.

Flow chart diagrams, Charts showing industrial plant, Samples of catalyst (V2O5), Photographs of Thika chemical plant, Calculator for percentage calculations
Concentrated H2SO4, Copper(II) sulphate crystals, Sucrose, Ethanol, KMnO4 solution, Test tubes, Beakers, Safety equipment, Fume cupboard

KLB Secondary Chemistry Form 4, Pages 179-181

SULPHUR AND ITS COMPOUNDS

Properties of Concentrated Sulphuric(VI) Acid - Oxidizing Properties
Properties of Concentrated Sulphuric(VI) Acid - Displacement Reactions

By the end of the lesson, the learner should be able to:
Investigate the oxidizing properties of concentrated H2SO Test reactions with metals and non-metals. Identify the products of oxidation reactions. Write balanced equations for redox reactions.
Investigate acid displacement reactions. Demonstrate formation of volatile acids. Test the evolved gases for identification. Write equations for displacement reactions.

Practical work: Experiment 10 (continued) - Reactions with copper foil, zinc granules, charcoal. Testing evolved gases with acidified K2Cr2O7 paper, lime water. Observations: SO2 evolution, color changes. Discussion: H2SO4 → SO2 + H2O + [O]. Writing half-equations and overall equations.
Practical work: Experiment 10 (continued) - Reactions with potassium nitrate and sodium chloride. Testing evolved gases with moist blue litmus, concentrated ammonia. Observations: Brown fumes (NO2), white fumes (HCl). Discussion: Less volatile acid displacing more volatile acids. Industrial applications.

Copper foil, Zinc granules, Charcoal powder, Concentrated H2SO4, Acidified K2Cr2O7 paper, Lime water, Test tubes, Bunsen burner
Potassium nitrate crystals, Sodium chloride crystals, Concentrated H2SO4, Moist blue litmus paper, Concentrated ammonia, Test tubes, Bunsen burner

KLB Secondary Chemistry Form 4, Pages 183-184
KLB Secondary Chemistry Form 4, Pages 184

SULPHUR AND ITS COMPOUNDS

Reactions of Dilute Sulphuric(VI) Acid - With Metals
Reactions of Dilute Sulphuric(VI) Acid - With Carbonates

By the end of the lesson, the learner should be able to:
Investigate reactions of dilute H2SO4 with metals. Compare reactivity of different metals. Test for hydrogen gas evolution. Relate reactions to reactivity series.

Practical work: Experiment 11 - Reactions with magnesium, zinc, copper. Testing evolved gas with burning splint. Recording observations in Table 10. Discussion: More reactive metals above hydrogen displace it. Vigour of reaction decreases down reactivity series. Writing ionic equations.

Magnesium ribbon, Zinc granules, Copper turnings, Dilute H2SO4, Test tubes, Burning splints, Reactivity series chart
Sodium carbonate, Zinc carbonate, Calcium carbonate, Copper(II) carbonate, Dilute H2SO4, Lime water, Test tubes

KLB Secondary Chemistry Form 4, Pages 184-185

SULPHUR AND ITS COMPOUNDS

Reactions of Dilute Sulphuric(VI) Acid - With Oxides and Hydroxides

By the end of the lesson, the learner should be able to:
Investigate reactions of dilute H2SO4 with metal oxides and hydroxides. Identify neutralization reactions. Explain formation of insoluble sulphates. Write equations for acid-base reactions.

Practical work: Experiment 13 - Reactions with magnesium oxide, zinc oxide, copper(II) oxide, lead(II) oxide, sodium hydroxide. Recording observations in Table 1 Discussion: Salt and water formation, immediate stopping with lead(II) oxide due to insoluble PbSO Acid-base neutralization concept.

Metal oxides (MgO, ZnO, CuO, PbO), NaOH solution, 2M H2SO4, Test tubes, Bunsen burner for warming

KLB Secondary Chemistry Form 4, Pages 186-187

SULPHUR AND ITS COMPOUNDS

Hydrogen Sulphide - Preparation and Physical Properties

By the end of the lesson, the learner should be able to:
Describe laboratory preparation of hydrogen sulphide. Set up apparatus for H2S preparation. State the physical properties of H2S. Explain the toxicity and safety precautions.

Demonstration: Figure 13 apparatus setup for H2S preparation. Reaction: FeS + 2HCl → FeCl2 + H2S. Collection over warm water due to solubility. Drying: Using anhydrous CaCl2 (not H2SO4). Properties: Colorless, rotten egg smell, poisonous, denser than air. Safety precautions in handling.

Iron(II) sulphide, Dilute HCl, Apparatus for gas generation, Anhydrous CaCl2, Gas jars, Safety equipment, Fume cupboard

KLB Secondary Chemistry Form 4, Pages 187-188

SULPHUR AND ITS COMPOUNDS
CHLORINE AND ITS COMPOUNDS

Chemical Properties of Hydrogen Sulphide
Pollution Effects and Summary
Introduction and Preparation of Chlorine
Physical Properties of Chlorine
Chemical Properties of Chlorine - Reaction with Water

By the end of the lesson, the learner should be able to:
Investigate H2S as a reducing agent. Test reactions with oxidizing agents. Demonstrate precipitation of metal sulphides. Write ionic equations for redox reactions.
Define chlorine and state its position in the periodic table. Describe the occurrence of chlorine in nature. Describe laboratory preparation of chlorine gas. Write balanced equations for chlorine preparation.

Practical demonstrations: H2S with bromine water, iron(III) chloride, acidified KMnO4, K2Cr2O7. Precipitation tests: H2S with copper(II) sulphate, lead(II) nitrate, zinc sulphate. Color changes: Brown to colorless, yellow to green, purple to colorless. Formation of black, yellow, and white precipitates.
Q/A: Review Group VII elements and electron configuration of chlorine ( 8.7). Discussion: Occurrence as sodium chloride in sea water and rock salt. Practical work: Experiment 6.1 - Preparation using MnO2 + concentrated HCl. Setup apparatus as in Figure 6. Safety precautions for handling chlorine gas.

H2S gas, Bromine water, Iron(III) chloride, KMnO4, K2Cr2O7, Metal salt solutions, Test tubes, Droppers
Charts showing pollution effects, Photographs of acid rain damage, Environmental data, Summary charts of reactions, Industrial pollution control diagrams
Manganese(IV) oxide, Concentrated HCl, Gas collection apparatus, Water, Concentrated H2SO4, Blue litmus paper, Gas jars
Preserved chlorine gas, Water trough, Gas jars, Observation tables, Safety equipment
Chlorine gas, Distilled water, Blue and red litmus papers, Colored flower petals, Gas jars, Boiling tubes

KLB Secondary Chemistry Form 4, Pages 188-190
KLB Secondary Chemistry Form 4, Pages 195-196

CHLORINE AND ITS COMPOUNDS

Chemical Properties of Chlorine - Reaction with Metals
Chemical Properties of Chlorine - Reaction with Non-metals
Oxidising Properties of Chlorine

By the end of the lesson, the learner should be able to:
Investigate reactions of chlorine with metals. Write balanced equations for metal-chlorine reactions. Explain the formation of metal chlorides. Demonstrate exothermic nature of these reactions.

Practical work: Experiment 6.4 - Reactions with burning magnesium, hot iron wire, dry chlorine over hot iron coil (Figure 6.2). Recording observations in Table 6. Observations: White fumes (MgCl2), glowing iron wire, black crystals (FeCl3). Discussion: Formation of higher oxidation state chlorides. Safety: Proper ventilation and eye protection.

Magnesium ribbon, Iron wire, Chlorine gas, Deflagrating spoon, Combustion tube, Anhydrous CaCl2, Gas jars
Red phosphorus, Hydrogen gas, Chlorine gas, Deflagrating spoon, Gas jars, Bunsen burner, Safety equipment
Sodium sulphite solution, Barium nitrate, Lead nitrate, Hydrogen sulphide gas, Aqueous ammonia, Chlorine gas, Test tubes

KLB Secondary Chemistry Form 4, Pages 199-201

CHLORINE AND ITS COMPOUNDS

Reaction of Chlorine with Alkali Solutions
Oxidising Properties - Displacement Reactions

By the end of the lesson, the learner should be able to:
Investigate reactions of chlorine with alkalis. Compare reactions with cold dilute and hot concentrated alkalis. Write equations for formation of chlorates and hypochlorites. Explain formation of bleaching powder.

Practical work: Experiment 6.7 - Bubbling chlorine through cold dilute NaOH and hot concentrated NaOH. Recording observations in Table 6. Formation of pale-yellow solution (cold) vs colorless solution (hot). Equations: 3Cl2 + 6NaOH → 5NaCl + NaClO3 + 3H2O (hot), Cl2 + 2NaOH → NaCl + NaClO + H2O (cold). Discussion: Industrial production of bleaching powder.

Sodium hydroxide solutions (dilute cold, concentrated hot), Chlorine gas, Beakers, Bunsen burner, Thermometer
Potassium bromide solution, Potassium iodide solution, Chlorine gas, Test tubes, Observation charts

KLB Secondary Chemistry Form 4, Pages 202-203

CHLORINE AND ITS COMPOUNDS

Test for Chloride Ions
Uses of Chlorine and its Compounds

By the end of the lesson, the learner should be able to:
Carry out confirmatory tests for chloride ions. Distinguish between different chloride tests. Practice qualitative analysis techniques. Write equations for chloride ion tests.

Practical work: Experiment 6.9 - Testing sodium chloride with concentrated H2SO4, testing with lead(II) nitrate solution. Recording observations in Table 6. Tests: White fumes with H2SO4 + ammonia test, white precipitate with Pb(NO3)2 that dissolves on warming. Writing equations: NaCl + H2SO4 → NaHSO4 + HCl, Pb²⁺ + 2Cl⁻ → PbCl

Sodium chloride, Concentrated H2SO4, Lead(II) nitrate solution, Aqueous ammonia, Glass rod, Test tubes, Bunsen burner
Charts showing industrial uses, Samples of bleaching agents, PVC materials, Photographs of water treatment plants, Industrial application diagrams

KLB Secondary Chemistry Form 4, Pages 204-205

CHLORINE AND ITS COMPOUNDS

Hydrogen Chloride - Laboratory Preparation
Chemical Properties of Hydrogen Chloride

By the end of the lesson, the learner should be able to:
Describe laboratory preparation of hydrogen chloride gas. Set up apparatus for HCl preparation. Investigate physical properties of HCl gas. Explain the method of collection used.
Prepare aqueous hydrogen chloride (hydrochloric acid). Investigate acid properties of HCl solution. Test reactions with metals, bases, and carbonates. Compare HCl in water vs organic solvents.

Practical work: Experiment 6.10 - Preparation using rock salt (NaCl) + concentrated H2SO Setup apparatus as in Figure 6.3(b). Testing physical properties and recording in Table 6.6. Tests: Solubility (fountain experiment), reaction with ammonia, effect on litmus. Collection by downward delivery due to density. Writing equation: NaCl + H2SO4 → NaHSO4 + HCl.
Practical work: Experiment 6.11 - Preparation of aqueous HCl using apparatus in Figure 6. Testing with metals (Zn, Fe, Mg, Cu), NaOH, carbonates, lead nitrate. Recording observations in Table 6.7. Testing HCl in methylbenzene - no acid properties. Discussion: Ionization in water vs molecular existence in organic solvents. Writing equations for acid reactions.

Rock salt (NaCl), Concentrated H2SO4, Gas collection apparatus, Ammonia solution, Litmus papers, Water trough, Gas jars
Distilled water, Filter funnel, Metals (Zn, Fe, Mg, Cu), NaOH solution, Carbonates, Lead nitrate, Methylbenzene, Indicators

KLB Secondary Chemistry Form 4, Pages 207-208
KLB Secondary Chemistry Form 4, Pages 208-211

CHLORINE AND ITS COMPOUNDS

Large-scale Manufacture of Hydrochloric Acid
Uses of Hydrochloric Acid

By the end of the lesson, the learner should be able to:
Describe industrial production of hydrochloric acid. Identify raw materials and conditions used. Explain the controlled combustion process. Draw flow diagrams of the industrial process.

Study of Figure 6.4 - Large-scale manufacture setup. Discussion: Raw materials (H2 from electrolysis/cracking, Cl2 from electrolysis). Controlled combustion: H2 + Cl2 → 2HCl in jet burner. Dissolving HCl gas in water over glass beads. Safety: Explosive nature of H2/Cl2 mixture, use of excess chlorine. Industrial considerations: 35% concentration, transport in rubber-lined steel tanks.

Flow diagrams, Industrial photographs, Glass beads samples, Charts showing electrolysis processes, Safety equipment models
Samples of rusted and cleaned metals, Photographic materials, pH control charts, Industrial application videos, Water treatment diagrams

KLB Secondary Chemistry Form 4, Pages 211-212

CHLORINE AND ITS COMPOUNDS

Environmental Pollution by Chlorine Compounds and Summary

By the end of the lesson, the learner should be able to:
Explain environmental effects of chlorine compounds. Describe the impact of CFCs on ozone layer. Discuss pollution by chlorine-containing pesticides. Summarize key concepts of chlorine chemistry.

Discussion: Environmental impacts - chlorine gas forming acid rain, CFCs (life span CCl3F = 75 years, CCl2F2 = 110 years) breaking down ozone layer. DDT as persistent pesticide, PVC as non-biodegradable plastic. NEMA role in environmental protection, Stockholm Convention on DDT. Control measures and alternatives. Revision: Key reactions, properties, uses, and environmental considerations. Summary of halogen chemistry concepts.

Environmental pollution charts, Ozone layer diagrams, DDT restriction documents, PVC waste samples, NEMA guidelines, Summary charts of reactions

KLB Secondary Chemistry Form 4, Pages 213-215