CARBON AND SOME OF ITS COMPOUNDS.

Allotropy.
Physical and chemical properties of diamond, graphite and amorphous carbon

By the end of the lesson, the learner should be able to:
Define allotropes and allotropy.
Identify allotropes of carbon.
Represent diamond and graphite diagrammatically.

Review covalent bond.
Discuss boding in diamond and graphite.

Chat with drawing of different allotropes of carbon 
Charcoal, graphite.

K.L.B. BOOK II PP. 131-133.                                     Certificate book two pg130-131.

CARBON AND SOME OF ITS COMPOUNDS.

Burning carbon and oxygen.
Reduction properties of carbon.
Reaction of carbon with acids. Preparation of CO2.
Properties of CO2.

By the end of the lesson, the learner should be able to:
Describe reaction of carbon with oxygen.
Describe reaction of carbon with acids.




Prepare CO2 in the lab.

 demonstration- Prepare oxygen and pass dry oxygen into a tube containing carbon. Heat the carbon. Observe effects on limewater.
- demonstration- reaction of carbon with hot conc HNO3.
Write balanced equations for the reaction.

Review effects of heat on carbonates.
Group experiments/teacher demonstration- preparation of CO2.

Carbon, limewater, tube, limewater stand& Bunsen burner.
CuO, pounded charcoal, Bunsen burner& bottle top
Conc. HNO3, limewater.
Lime water,
Magnesium ribbon,
Universal indicator,
lit candle.

K.L.B. BOOK II PP. 134-135
K.L.B. BOOK II P.126.       Certificate book two pg 131-132.

CARBON AND SOME OF ITS COMPOUNDS.

Chemical equations for reactions involving CO2.

By the end of the lesson, the learner should be able to:
Write balanced CO2.

Give examples of reactions. Write corresponding balanced chemical equations.

Chart with balanced chemical equations 

K.L.B. BOOK II PP.139-140.                                     Certificate book two pg 132-133.

CARBON AND SOME OF ITS COMPOUNDS.

Uses of CO2.
Carbon monoxide lab preparation.

By the end of the lesson, the learner should be able to:
State uses of CO2

Discuss briefly the uses of CO2.

Chart with shawing different uses of Co2.

K.L.B. BOOK II PP.140-1. Certificate book two pg 133-134.

CARBON AND SOME OF ITS COMPOUNDS.

Chemical properties of carbon monoxide.
Carbonates and hydrogen carbonates.

By the end of the lesson, the learner should be able to:
To describe chemical properties of carbon monoxide.

Description of properties of carbon monoxide.
Discussion and writing of chemical equations.

Chart with properties of carbon 

K.L.B. BOOK II PP. 144-145.                                     Certificate book two pg 134-135.

CARBON AND SOME OF ITS COMPOUNDS.

Heating carbonates and hydrogen carbonates.
Extraction of sodium carbonate from trona.
Solvay process of preparing sodium carbonate.

By the end of the lesson, the learner should be able to:
To write equations for reaction of carbonates and hydrogen carbonates on heating.
To draw schematic diagram for extraction of sodium carbonates.

Discuss the above observations.
Write corresponding balanced equations.
Discuss each step of the process.

Write relevant equations.

 chart 

K.L.B. BOOK II PP.150-151.                                     Certificate book two pg 135-136.

CARBON AND SOME OF ITS COMPOUNDS.

Importance of carbon in nature. & its effects on the environment.

By the end of the lesson, the learner should be able to:
To discuss: - Importance of carbon in nature.
&
Effects of carbon on the environment.

Discuss the carbon cycle and processes that increase/ reduce amount of CO2 in the air.
Uses of CO2 in soft drinks and fire extinguishers.

Chart with carbon circle drawings.

K.L.B. BOOK II PP.157-158.                                     Certificate book two pg 136-137

GAS LAWS

Boyle's Law - Introduction and Experimental Investigation

By the end of the lesson, the learner should be able to:
State Boyle's law
Explain Boyle's law using kinetic theory of matter
Investigate the relationship between pressure and volume of a fixed mass of gas
Plot graphs to illustrate Boyle's law

Teacher demonstration: Use bicycle pump to show volume-pressure relationship. Students observe force needed to compress gas. Q/A: Review kinetic theory. Class experiment: Investigate pressure-volume relationship using syringes. Record observations in table format. Discuss observations using kinetic theory.

Bicycle pump, Syringes, Gas jars, Chart showing volume-pressure relationship

KLB Secondary Chemistry Form 3, Pages 1-3.                           Certificate book three pg 1-3

GAS LAWS

Boyle's Law - Mathematical Expression and Graphical Representation

By the end of the lesson, the learner should be able to:
Express Boyle's law mathematically
Apply the equation PV = constant
Plot and interpret pressure vs volume graphs
Plot pressure vs 1/volume graphs

Q/A: Recall previous lesson observations. Teacher exposition: Derive P₁V₁ = P₂V₂ equation from experimental data. Students plot graphs of pressure vs volume and pressure vs 1/volume. Analyze graph shapes and interpret mathematical relationship.

Graph papers, Scientific calculators, Chart showing mathematical expressions

KLB Secondary Chemistry Form 3, Pages 3-4.                           Certificate book three pg 3-4

GAS LAWS

Boyle's Law - Numerical Problems and Applications

By the end of the lesson, the learner should be able to:
Solve numerical problems involving Boyle's law
Convert between different pressure units
Apply Boyle's law to real-life situations
Calculate volumes and pressures using P₁V₁ = P₂V₂

Worked examples: Demonstrate step-by-step problem solving. Supervised practice: Students solve problems involving pressure and volume calculations. Convert units (mmHg, atm, Pa). Discuss applications in tire inflation, aerosol cans. Assignment: Additional practice problems.

Scientific calculators, Worked example charts, Unit conversion tables

KLB Secondary Chemistry Form 3, Pages 4-5.                           Certificate book three pg 4-5.

GAS LAWS

Charles's Law - Introduction and Temperature Scales

By the end of the lesson, the learner should be able to:
State Charles's law
Convert temperatures between Celsius and Kelvin scales
Define absolute zero temperature
Explain the concept of absolute temperature

 demonstration: Flask with colored water column experiment. Q/A: Observe volume changes with temperature. Exposition: Introduce Kelvin scale and absolute zero concept. Practice: Temperature conversions between °C and K. Discuss absolute zero and ideal gas concept.

Round-bottomed flask, Narrow glass tube, Colored water, Rubber bung, Hot and cold water baths

KLB Secondary Chemistry Form 3, Pages 6-8.                           Certificate book three pg 5-6

GAS LAWS

Charles's Law - Experimental Investigation and Mathematical Expression

By the end of the lesson, the learner should be able to:
Investigate relationship between volume and temperature
Express Charles's law mathematically
Plot volume vs temperature graphs
Extrapolate graphs to find absolute zero

Class experiment: Volume-temperature relationship using flask and capillary tube. Record data at different temperatures. Plot graphs: volume vs temperature (°C) and volume vs absolute temperature (K). Extrapolate graph to find absolute zero. Derive V₁/T₁ = V₂/T₂ equation.

Glass apparatus, Thermometers, Graph papers, Water baths at different temperatures

KLB Secondary Chemistry Form 3, Pages 8-10.                         Certificate book three pg 7-8

GAS LAWS

Charles's Law - Numerical Problems and Applications

By the end of the lesson, the learner should be able to:
Solve numerical problems using Charles's law
Apply V₁/T₁ = V₂/T₂ in calculations
Predict gas behavior with temperature changes
Relate Charles's law to everyday phenomena

Worked examples: Step-by-step problem solving with temperature conversions. Supervised practice: Calculate volumes at different temperatures. Discuss applications: hot air balloons, tire pressure changes, weather balloons. Assignment: Practice problems with real-life contexts.

Scientific calculators, Temperature conversion charts, Application examples

KLB Secondary Chemistry Form 3, Pages 10-12.                       Certificate book three pg 8-9

GAS LAWS

Combined Gas Law and Standard Conditions

By the end of the lesson, the learner should be able to:
Derive the combined gas law equation
Apply PV/T = constant in problem solving
Define standard temperature and pressure (s.t.p)
Define room temperature and pressure (r.t.p)

Q/A: Combine Boyle's and Charles's laws. Teacher exposition: Derive P₁V₁/T₁ = P₂V₂/T₂. Define s.t.p (273K, 760mmHg) and r.t.p (298K, 760mmHg). Worked examples: Problems involving changes in all three variables. Supervised practice: Complex gas law calculations.

Scientific calculators, Combined law derivation charts, Standard conditions reference table

KLB Secondary Chemistry Form 3, Pages 12-14.                      Certificate book three pg 9-10

GAS LAWS

Introduction to Diffusion - Experimental Investigation

By the end of the lesson, the learner should be able to:
Define diffusion process
Investigate diffusion in liquids and gases
Compare rates of diffusion in different media
Explain diffusion using kinetic theory

Class experiments: (a) KMnO₄ crystal in water - observe spreading over time. (b) Bromine vapor in gas jars - observe color distribution. (c) Ammonia gas in combustion tube with litmus paper. Record observations over time. Discuss particle movement and kinetic energy.

KMnO₄ crystals, Bromine liquid, Gas jars, Combustion tube, Litmus papers, Stopwatch

KLB Secondary Chemistry Form 3, Pages 14-16.                       Certificate book three pg 11-14

GAS LAWS

Rates of Diffusion - Comparative Study

By the end of the lesson, the learner should be able to:
Compare diffusion rates of different gases
Investigate factors affecting diffusion rates
Measure relative distances covered by diffusing gases
Calculate rates of diffusion using distance and time data

Class experiment: Ammonia and HCl diffusion in glass tube. Insert cotton wool soaked in concentrated NH₃ and HCl at opposite ends. Time the formation of white NH₄Cl ring. Measure distances covered by each gas. Calculate rates: distance/time. Compare molecular masses of NH₃ and HCl.

Glass tube (25cm), Cotton wool, Concentrated NH₃ and HCl, Stopwatch, Ruler, Safety equipment

KLB Secondary Chemistry Form 3, Pages 16-18.                      Certificate book three pg 15-16

GAS LAWS

Graham's Law of Diffusion - Theory and Mathematical Expression

By the end of the lesson, the learner should be able to:
State Graham's law of diffusion
Express Graham's law mathematically
Relate diffusion rate to molecular mass and density
Explain the inverse relationship between rate and √molecular mass

Introduction :Graham's law statement and mathematical derivation. Discussion: Rate ∝ 1/√density and Rate ∝ 1/√molecular mass. Derive comparative expressions for two gases. Explain relationship between density and molecular mass. Practice: Identify faster diffusing gas from molecular masses.

Graham's law charts, Molecular mass tables, Mathematical derivation displays

KLB Secondary Chemistry Form 3, Pages 18-20.                      Certificate book three pg 17-18.

GAS LAWS

Graham's Law - Numerical Applications and Problem Solving

By the end of the lesson, the learner should be able to:
Solve numerical problems using Graham's law
Calculate relative rates of diffusion
Determine molecular masses from diffusion data
Compare diffusion times for equal volumes of gases

Worked examples: Calculate relative diffusion rates using √(M₂/M₁). Problems involving time comparisons for equal volumes. Calculate unknown molecular masses from rate data. Supervised practice: Various Graham's law calculations. Real-life applications: gas separation, gas masks.

Scientific calculators, Worked example charts, Molecular mass reference tables

KLB Secondary Chemistry Form 3, Pages 20-22.                      Certificate book three pg 18-19.

THE MOLE

Relative Mass - Introduction and Experimental Investigation

By the end of the lesson, the learner should be able to:
Define relative mass using practical examples
Compare masses of different objects using a reference standard
Explain the concept of relative atomic mass
Identify carbon-12 as the reference standard

Experiment: Weighing different sized nails using beam balance. Use smallest nail as reference standard. Q/A: Discuss everyday examples of relative measurements. Teacher exposition: Introduction of carbon-12 scale and IUPAC recommendations. Calculate relative masses from experimental data.

Different sized nails ( 5-15cm), Beam balance, Fruits of different masses, Reference charts

KLB Secondary Chemistry Form 3, Pages 25-27.                      Certificate book three pg 20-22.

THE MOLE

Avogadro's Constant and the Mole Concept

By the end of the lesson, the learner should be able to:
Define Avogadro's constant and its value
Explain the concept of a mole as a counting unit
Relate molar mass to relative atomic mass
Calculate number of atoms in given masses of elements

Experiment: Determine number of nails with mass equal to relative mass in grams. Teacher exposition: Introduce Avogadro's constant (6.023 × 10²³). Discussion: Mole as counting unit like dozen. Worked examples: Calculate moles from mass and vice versa.

Beam balance, Various sized nails, Scientific calculators, Avogadro's constant charts

KLB Secondary Chemistry Form 3, Pages 27-30.                      Certificate book three pg 22-24

THE MOLE

Interconversion of Mass and Moles for Elements

By the end of the lesson, the learner should be able to:
Apply the formula: moles = mass/molar mass
Calculate mass from given moles of elements
Convert between moles and number of atoms
Solve numerical problems involving moles and mass

Worked examples: Mass-mole conversions using triangle method. Supervised practice: Calculate moles in given masses of common elements. Problem solving: Convert moles to atoms using Avogadro's number. Assignment: Practice problems on interconversion.

Scientific calculators, Periodic table, Worked example charts, Formula triangles

KLB Secondary Chemistry Form 3, Pages 30-32.                      Certificate book three pg 24-25.

THE MOLE

Molecules and Moles - Diatomic Elements

By the end of the lesson, the learner should be able to:
Distinguish between atoms and molecules
Define relative molecular mass
Calculate moles of molecules from given mass
Determine number of atoms in molecular compounds

Discussion: Elements existing as molecules (O₂, H₂, N₂, Cl₂). Teacher exposition: Difference between atomic and molecular mass. Worked examples: Calculate moles of molecular elements. Problem solving: Number of atoms in molecular compounds.

Molecular models, Charts showing diatomic elements, Scientific calculators

KLB Secondary Chemistry Form 3, Pages 29-30.                      Certificate book three pg 25-26.

THE MOLE

Empirical Formula - Experimental Determination

By the end of the lesson, the learner should be able to:
Define empirical formula
Determine empirical formula from experimental data
Calculate mole ratios from mass data
Express results as simplest whole number ratios

Experiment: Burning magnesium in air to form magnesium oxide. Measure masses before and after reaction. Calculate moles of Mg and O from mass data. Determine mole ratio and empirical formula. Safety precautions during heating.

Crucible and lid, Magnesium ribbon, Bunsen burner, Beam balance, Tongs, Safety equipment

KLB Secondary Chemistry Form 3, Pages 32-35.                      Certificate book three pg 26-27.

THE MOLE

Empirical Formula - Reduction Method

By the end of the lesson, the learner should be able to:
Determine empirical formula using reduction reactions
Calculate empirical formula from reduction data
Apply reduction method to copper oxides
Analyze experimental errors and sources

Experiment: Reduction of copper(II) oxide using laboratory gas. Measure masses before and after reduction. Calculate moles of copper and oxygen. Determine empirical formula from mole ratios. Discuss experimental precautions.

Combustion tube, Porcelain boat, Copper(II) oxide, Laboratory gas, Beam balance, Bunsen burner

KLB Secondary Chemistry Form 3, Pages 35-37.                      Certificate book three pg 28-29.

THE MOLE

Empirical Formula - Percentage Composition Method

By the end of the lesson, the learner should be able to:
Calculate empirical formula from percentage composition
Convert percentages to moles
Determine simplest whole number ratios
Apply method to various compounds

Worked examples: Calculate empirical formula from percentage data. Method: percentage → mass → moles → ratio. Practice problems: Various compounds with different compositions. Discussion: When to multiply ratios to get whole numbers.

Scientific calculators, Percentage composition charts, Worked example displays

KLB Secondary Chemistry Form 3, Pages 37-38.                      Certificate book three pg 30-31

THE MOLE

Molecular Formula - Determination from Empirical Formula

By the end of the lesson, the learner should be able to:
Define molecular formula
Relate molecular formula to empirical formula
Calculate molecular formula using molecular mass
Apply the relationship (empirical formula)ₙ = molecular formula

Introduction: Difference between empirical and molecular formulas. Worked examples: Calculate molecular formula from empirical formula and molecular mass. Formula: n = molecular mass/empirical formula mass. Practice problems with various organic compounds.

Scientific calculators, Molecular mass charts, Worked example displays

KLB Secondary Chemistry Fo mlrm 3, Pages 38-40.                      Certificate book three pg 32-33

THE MOLE

Molecular Formula - Combustion Analysis

By the end of the lesson, the learner should be able to:
Determine molecular formula from combustion data
Calculate moles of products in combustion
Relate product moles to reactant composition
Apply combustion analysis to hydrocarbons

Worked examples: Hydrocarbon combustion producing CO₂ and H₂O. Calculate moles of C and H from product masses. Determine empirical formula, then molecular formula. Practice: Various combustion analysis problems.

Scientific calculators, Combustion analysis charts, Molecular models of hydrocarbons

KLB Secondary Chemistry Form 3, Pages 40-41.                      Certificate book three pg 34-35. 

THE MOLE

Concentration and Molarity of Solutions

By the end of the lesson, the learner should be able to:
Define concentration and molarity of solutions
Calculate molarity from mass and volume data
Convert between different concentration units
Apply molarity calculations to various solutions

Introduction: Definition of molarity (moles/dm³). Worked examples: Calculate molarity from mass of solute and volume. Convert between g/dm³ and mol/dm³. Practice problems: Various salt solutions and their molarities.

Scientific calculators, Molarity charts, Various salt samples for demonstration

KLB Secondary Chemistry Form 3, Pages 41-43.                      Certificate book three pg 35-36.

THE MOLE

Preparation of Molar Solutions
Dilution of Solutions

By the end of the lesson, the learner should be able to:
Describe procedure for preparing molar solutions
Use volumetric flasks correctly
Calculate masses needed for specific molarities
Prepare standard solutions accurately
Define dilution process
Apply dilution formula M₁V₁ = M₂V₂
Calculate concentrations after dilution
Prepare dilute solutions from concentrated ones

Experiment: Prepare 1M, 0.5M, and 0.25M NaOH solutions in different volumes. Use volumetric flasks of 1000cm³, 500cm³, and 250cm³. Calculate required masses. Demonstrate proper dissolution and dilution techniques.
Experiment: Dilute 25cm³ of 2M HCl to different final volumes (250cm³ and 500cm³). Calculate resulting concentrations. Worked examples using dilution formula. Safety precautions when diluting acids.

Volumetric flasks (250, 500, 1000cm³), Sodium hydroxide pellets, Beam balance, Wash bottles, Beakers
Volumetric flasks, Hydrochloric acid (2M), Measuring cylinders, Pipettes, Safety equipment

KLB Secondary Chemistry Form 3, Pages 43-46
KLB Secondary Chemistry Form 3, Pages 46-50.                      Certificate book three pg 36-37

THE MOLE

Dilution of Solutions

By the end of the lesson, the learner should be able to:
Define dilution process
Apply dilution formula M₁V₁ = M₂V₂
Calculate concentrations after dilution
Prepare dilute solutions from concentrated ones

Experiment: Dilute 25cm³ of 2M HCl to different final volumes (250cm³ and 500cm³). Calculate resulting concentrations. Worked examples using dilution formula. Safety precautions when diluting acids.

Volumetric flasks, Hydrochloric acid (2M), Measuring cylinders, Pipettes, Safety equipment

KLB Secondary Chemistry Form 3, Pages 46-50.                      Certificate book three pg 37-38

THE MOLE

Stoichiometry - Experimental Determination of Equations

By the end of the lesson, the learner should be able to:
Determine chemical equations from experimental data
Calculate mole ratios from mass measurements
Write balanced chemical equations
Apply stoichiometry to displacement reactions

Experiment: Iron displacement of copper from CuSO₄ solution. Measure masses of iron used and copper displaced. Calculate mole ratios. Derive balanced chemical equation. Discuss spectator ions.

Iron filings, Copper(II) sulphate solution, Beam balance, Beakers, Filter equipment

KLB Secondary Chemistry Form 3, Pages 50-53.                      Certificate book three pg 39-40

THE MOLE

Stoichiometry - Precipitation Reactions

By the end of the lesson, the learner should be able to:
Investigate stoichiometry of precipitation reactions
Determine mole ratios from volume measurements
Write ionic equations for precipitation
Analyze limiting and excess reagents

Experiment: Pb(NO₃)₂ + KI precipitation reaction. Use different volumes to determine stoichiometry. Measure precipitate heights. Plot graphs to find reaction ratios. Identify limiting reagents.

Test tubes, Lead(II) nitrate solution, Potassium iodide solution, Burettes, Ethanol, Rulers

KLB Secondary Chemistry Form 3, Pages 53-56.                      Certificate book three pg 41-42.

THE MOLE

Stoichiometry - Gas Evolution Reactions
Volumetric Analysis - Introduction and Apparatus

By the end of the lesson, the learner should be able to:
Determine stoichiometry of gas-producing reactions
Collect and measure gas volumes
Calculate mole ratios involving gases
Write equations for acid-carbonate reactions
Define volumetric analysis and titration
Identify and use titration apparatus correctly
Explain functions of pipettes and burettes
Demonstrate proper reading techniques

Experiment: HCl + Na₂CO₃ reaction. Collect CO₂ gas in plastic bag. Measure gas mass and calculate moles. Determine mole ratios of reactants and products. Write balanced equation.
Practical session: Familiarization with pipettes and burettes. Practice filling and reading burettes accurately. Learn proper meniscus reading. Use pipette fillers safely. Rinse apparatus with appropriate solutions.

Conical flask, Thistle funnel, Plastic bags, Rubber bands, Sodium carbonate, HCl solution
Pipettes (10, 20, 25cm³), Burettes (50cm³), Pipette fillers, Conical flasks, Various solutions

KLB Secondary Chemistry Form 3, Pages 56-58
KLB Secondary Chemistry Form 3, Pages 58-59.                      Certificate book three pg 43-44

THE MOLE

Volumetric Analysis - Introduction and Apparatus

By the end of the lesson, the learner should be able to:
Define volumetric analysis and titration
Identify and use titration apparatus correctly
Explain functions of pipettes and burettes
Demonstrate proper reading techniques

Practical session: Familiarization with pipettes and burettes. Practice filling and reading burettes accurately. Learn proper meniscus reading. Use pipette fillers safely. Rinse apparatus with appropriate solutions.

Pipettes (10, 20, 25cm³), Burettes (50cm³), Pipette fillers, Conical flasks, Various solutions

KLB Secondary Chemistry Form 3, Pages 58-59.                      Certificate book three pg 44-45.

THE MOLE

Titration - Acid-Base Neutralization

By the end of the lesson, the learner should be able to:
Perform acid-base titrations accurately
Use indicators to determine end points
Record titration data properly
Calculate average titres from multiple readings

Experiment: Titrate 25cm³ of 0.1M NaOH with 0.1M HCl using phenolphthalein. Repeat three times for consistency. Record data in tabular form. Calculate average titre. Discuss accuracy and precision.

Burettes, Pipettes, 0.1M NaOH, 0.1M HCl, Phenolphthalein indicator, Conical flasks

KLB Secondary Chemistry Form 3, Pages 59-62.                      Certificate book three pg 46-47.

THE MOLE

Titration - Diprotic Acids

By the end of the lesson, the learner should be able to:
Investigate titrations involving diprotic acids
Determine basicity of acids from titration data
Compare volumes needed for mono- and diprotic acids
Write equations for diprotic acid reactions

Experiment: Titrate 25cm³ of 0.1M NaOH with 0.1M H₂SO₄. Compare volume used with previous HCl titration. Calculate mole ratios. Explain concept of basicity. Introduce dibasic and tribasic acids.

Burettes, Pipettes, 0.1M H₂SO₄, 0.1M NaOH, Phenolphthalein, Basicity reference chart

KLB Secondary Chemistry Form 3, Pages 62-65.                      Certificate book three pg 48-49

THE MOLE

Standardization of Solutions
Back Titration Method

By the end of the lesson, the learner should be able to:
Define standardization process
Standardize HCl using Na₂CO₃ as primary standard
Calculate accurate concentrations from titration data
Understand importance of primary standards
Understand principle of back titration
Apply back titration to determine composition
Calculate concentrations using back titration data
Determine atomic masses from back titration

Experiment: Prepare approximately 0.1M HCl and standardize using accurately weighed Na₂CO₃. Use methyl orange indicator. Calculate exact molarity from titration results. Discuss primary standard requirements.
Experiment: Determine atomic mass of divalent metal in MCO₃. Add excess HCl to carbonate, then titrate excess with NaOH. Calculate moles of acid that reacted with carbonate. Determine metal's atomic mass.

Anhydrous Na₂CO₃, Approximately 0.1M HCl, Methyl orange, Volumetric flasks, Analytical balance
Metal carbonate sample, 0.5M HCl, 0M NaOH, Phenolphthalein, Conical flasks

KLB Secondary Chemistry Form 3, Pages 65-67
KLB Secondary Chemistry Form 3, Pages 67-70.                      Certificate book three pg 50-51.

THE MOLE

Back Titration Method

By the end of the lesson, the learner should be able to:
Understand principle of back titration
Apply back titration to determine composition
Calculate concentrations using back titration data
Determine atomic masses from back titration

Experiment: Determine atomic mass of divalent metal in MCO₃. Add excess HCl to carbonate, then titrate excess with NaOH. Calculate moles of acid that reacted with carbonate. Determine metal's atomic mass.

Metal carbonate sample, 0.5M HCl, 0M NaOH, Phenolphthalein, Conical flasks

KLB Secondary Chemistry Form 3, Pages 67-70.                      Certificate book three pg 52-53

THE MOLE

Redox Titrations - Principles

By the end of the lesson, the learner should be able to:
Explain principles of redox titrations
Identify color changes in redox reactions
Understand self-indicating nature of some redox reactions
Write ionic equations for redox processes

Introduction: Redox titration principles. Demonstrate color changes: MnO₄⁻ (purple) → Mn²⁺ (colorless), Cr₂O₇²⁻ (orange) → Cr³⁺ (green). Discussion: Self-indicating reactions. Write half-equations and overall ionic equations.

Potassium manganate(VII), Potassium dichromate(VI), Iron(II) solutions, Color change charts

KLB Secondary Chemistry Form 3, Pages 68-70.                      Certificate book three pg 53-56.

THE MOLE

Redox Titrations - KMnO₄ Standardization

By the end of the lesson, the learner should be able to:
Standardize KMnO₄ solution using iron(II) salt
Calculate molarity from redox titration data
Apply 1:5 mole ratio in calculations
Prepare solutions for redox titrations

Experiment: Standardize KMnO₄ using FeSO₄(NH₄)₂SO₄·6H₂O. Dissolve iron salt in boiled, cooled water. Titrate with KMnO₄ until persistent pink color. Calculate molarity using 5:1 mole ratio.

Iron(II) ammonium sulfate, KMnO₄ solution, Dilute H₂SO₄, Pipettes, Burettes

KLB Secondary Chemistry Form 3, Pages 70-72.                      Certificate book three pg 57-58

THE MOLE

Water of Crystallization Determination
Atomicity and Molar Gas Volume

By the end of the lesson, the learner should be able to:
Determine water of crystallization in hydrated salts
Use redox titration to find formula of hydrated salt
Calculate value of 'n' in crystallization formulas
Apply analytical data to determine complete formulas
Define atomicity of gaseous elements
Classify gases as monoatomic, diatomic, or triatomic
Determine molar gas volume experimentally
Calculate gas densities and molar masses

Experiment: Determine 'n' in FeSO₄(NH₄)₂SO₄·nH₂O. Dissolve known mass in acid, titrate with standardized KMnO₄. Calculate moles of iron(II), hence complete formula. Compare theoretical and experimental values.
Experiment: Measure volumes and masses of different gases (O₂, CO₂, Cl₂). Calculate densities and molar masses. Determine volume occupied by one mole. Compare values at different conditions.

Hydrated iron(II) salt, Standardized KMnO₄, Dilute H₂SO₄, Analytical balance
Gas syringes (50cm³), Various gases, Analytical balance, Gas supply apparatus

KLB Secondary Chemistry Form 3, Pages 72-73
KLB Secondary Chemistry Form 3, Pages 73-75.                      Certificate book three pg 59-60

THE MOLE

Atomicity and Molar Gas Volume

By the end of the lesson, the learner should be able to:
Define atomicity of gaseous elements
Classify gases as monoatomic, diatomic, or triatomic
Determine molar gas volume experimentally
Calculate gas densities and molar masses

Experiment: Measure volumes and masses of different gases (O₂, CO₂, Cl₂). Calculate densities and molar masses. Determine volume occupied by one mole. Compare values at different conditions.

Gas syringes (50cm³), Various gases, Analytical balance, Gas supply apparatus

KLB Secondary Chemistry Form 3, Pages 73-75.                      Certificate book three pg 61-62.

THE MOLE

Combining Volumes of Gases - Experimental Investigation

By the end of the lesson, the learner should be able to:
Investigate Gay-Lussac's law experimentally
Measure combining volumes of reacting gases
Determine simple whole number ratios
Write equations from volume relationships

Experiment: React NH₃ and HCl gases in measured volumes. Observe formation of NH₄Cl solid. Measure residual gas volumes. Determine combining ratios. Apply to other gas reactions.

Gas syringes, Dry NH₃ generator, Dry HCl generator, Glass connecting tubes, Clips

KLB Secondary Chemistry Form 3, Pages 75-77.                      Certificate book three pg 63-64.

THE MOLE

Gas Laws and Chemical Equations

By the end of the lesson, the learner should be able to:
Apply Avogadro's law to chemical reactions
Use volume ratios to determine chemical equations
Calculate product volumes from reactant volumes
Solve problems involving gas stoichiometry

Worked examples: Use Gay-Lussac's law to determine equations. Calculate volumes of products from given reactant volumes. Apply Avogadro's law to find number of molecules. Practice: Complex gas stoichiometry problems.

Scientific calculators, Gas law charts, Volume ratio examples

KLB Secondary Chemistry Form 3, Pages 77-79.                      Certificate book three pg 65-68.