ACIDS, BASES AND SALTS

Definition of Acids

By the end of the lesson, the learner should be able to:
- Define an acid in terms of hydrogen ions
-Investigate reactions of magnesium and zinc carbonate with different acids
-Write equations for reactions taking place
-Explain why magnesium strip should be cleaned

Class experiment: React cleaned magnesium strips with 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid. Record observations in table. Repeat using zinc carbonate. Write chemical equations. Discuss hydrogen ion displacement and gas evolution.

Magnesium strips, zinc carbonate, 2M HCl, 2M ethanoic acid, 2M H₂SO₄, 2M ethanedioic acid, test tubes, test tube rack

KLB Secondary Chemistry Form 4, Pages 1-3

ACIDS, BASES AND SALTS

Strength of Acids
Definition of Bases

By the end of the lesson, the learner should be able to:
- Compare strengths of acids using pH values
-Determine strengths of acids by comparing their electrical conductivity
-Classify acids as either strong or weak
-Explain complete and partial dissociation of acids

Class experiment: Test pH of 2M HCl and 2M ethanoic acid using universal indicator. Set up electrical conductivity apparatus with both acids. Record milliammeter readings. Compare results and explain in terms of hydrogen ion concentration. Discuss strong vs weak acid definitions.

2M HCl, 2M ethanoic acid, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes, beakers, wires
Calcium hydroxide, red litmus paper, phenolphthalein indicator, distilled water, test tubes, spatula, evaporating dish

KLB Secondary Chemistry Form 4, Pages 3-5

ACIDS, BASES AND SALTS

Strength of Bases
Acid-Base Reactions
Effect of Solvent on Acids
Effect of Solvent on Bases
Amphoteric Oxides and Hydroxides

By the end of the lesson, the learner should be able to:
- Compare strengths of bases using pH values
-Determine strengths of bases by comparing their electrical conductivity
-Classify bases as either strong or weak
-Explain complete and partial ionization of bases
- Explain effect of polar and non-polar solvents on hydrogen chloride
-Investigate HCl behavior in water vs methylbenzene
-Define polar and non-polar solvents
-Explain why acids show properties only in polar solvents

Class experiment: Test pH of 2M NaOH and 2M ammonia solution using universal indicator. Test electrical conductivity of both solutions using same apparatus as acids. Compare deflections and pH values. Explain in terms of OH⁻ ion concentration and complete vs partial ionization.
Teacher demonstration: Dissolve HCl gas in water and methylbenzene separately. Test both solutions with litmus paper, magnesium, and calcium carbonate. Compare observations. Explain polarity of water vs methylbenzene. Discuss dissociation vs molecular solution.

2M NaOH, 2M ammonia solution, universal indicator, pH chart, electrical conductivity apparatus, milliammeter, carbon electrodes
Various acids and bases from previous lessons, indicators, beakers, measuring cylinders, stirring rods
HCl gas, distilled water, methylbenzene, magnesium ribbon, calcium carbonate, litmus paper, test tubes, gas absorption apparatus
Dry ammonia gas, distilled water, methylbenzene, red litmus paper, test tubes, gas collection apparatus
Al₂O₃, ZnO, PbO, Zn(OH)₂, Al(OH)₃, Pb(OH)₂, 2M HNO₃, 2M NaOH, boiling tubes, heating source

KLB Secondary Chemistry Form 4, Pages 5-7
KLB Secondary Chemistry Form 4, Pages 7-9

ACIDS, BASES AND SALTS

Definition of Salts and Precipitation

By the end of the lesson, the learner should be able to:
- Define a salt as an ionic compound
-Define a precipitate
-Investigate precipitation reactions
-Write ionic equations showing formation of precipitates

Q/A: Review salt definition from Book 2. Demonstrate precipitation: Add sodium carbonate to solutions containing Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, Cu²⁺, Fe²⁺, Ba²⁺, Pb²⁺ ions. Record observations. Write ionic equations for precipitate formation. Explain why Fe³⁺ and Al³⁺ give different results.

Na₂CO₃ solution, salt solutions containing various metal ions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 11-14

ACIDS, BASES AND SALTS

Solubility of Chlorides, Sulphates and Sulphites
Complex Ions Formation

By the end of the lesson, the learner should be able to:
- Find out cations that form insoluble chlorides, sulphates and sulphites
-Write ionic equations for formation of insoluble salts
-Distinguish between sulphate and sulphite precipitates
-Investigate effect of warming on precipitates

Class experiment: Add NaCl, Na₂SO₄, Na₂SO₃ to solutions of Pb²⁺, Ba²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Al³⁺. Warm mixtures. Record observations in table. Test sulphite precipitates with dilute HCl. List soluble and insoluble salts.

2M NaCl, 2M Na₂SO₄, 2M Na₂SO₃, 0.1M salt solutions, dilute HCl, test tubes, heating source
2M NaOH, 2M NH₃ solution, 0.5M salt solutions, test tubes, droppers

KLB Secondary Chemistry Form 4, Pages 14-16

ACIDS, BASES AND SALTS

Solubility and Saturated Solutions

By the end of the lesson, the learner should be able to:
- Define the term solubility
-Determine solubility of a given salt at room temperature
-Calculate mass of solute and solvent
-Express solubility in different units

Class experiment: Weigh evaporating dish and watch glass. Measure 20cm³ saturated KNO₃ solution. Record temperature. Evaporate to dryness carefully. Calculate masses of solute, solvent, and solution. Determine solubility per 100g water and in moles per litre. Discuss definition and significance.

Saturated KNO₃ solution, evaporating dish, watch glass, measuring cylinder, thermometer, balance, heating source

KLB Secondary Chemistry Form 4, Pages 16-18

ACIDS, BASES AND SALTS

Effect of Temperature on Solubility
Solubility Curves and Applications

By the end of the lesson, the learner should be able to:
- Investigate the effect of temperature on solubility of potassium chlorate
-Record temperature at which crystals appear
-Calculate solubility at different temperatures
-Plot solubility curve
- Plot solubility curves for various salts
-Use solubility curves to determine mass of crystals formed
-Apply solubility curves to practical problems
-Compare solubility patterns of different salts

Class experiment: Dissolve 4g KClO₃ in 15cm³ water by warming. Cool while stirring and note crystallization temperature. Add 5cm³ water portions and repeat until total volume is 40cm³. Calculate solubility in g/100g water for each temperature. Plot solubility vs temperature graph.
Using data from textbook, plot solubility curves for KNO₃, KClO₃, NaCl, CaSO₄. Calculate mass of crystals deposited when saturated solutions are cooled. Work through examples: KClO₃ cooled from 70°C to 30°C. Discuss applications in salt extraction and purification.

KClO₃, measuring cylinders, thermometer, burette, boiling tubes, heating source, graph paper
Graph paper, ruler, pencil, calculator, data tables from textbook

KLB Secondary Chemistry Form 4, Pages 18-20
KLB Secondary Chemistry Form 4, Pages 20-21

ACIDS, BASES AND SALTS

Fractional Crystallization

By the end of the lesson, the learner should be able to:
- Define fractional crystallization
-Apply knowledge of solubility curves in separation of salts
-Calculate masses of salts that crystallize
-Explain separation of salt mixtures

Work through separation problems using solubility data for KNO₃ and KClO₃ mixtures. Calculate which salt crystallizes first when cooled from 50°C to 20°C. Plot combined solubility curves. Discuss applications in Lake Magadi and Ngomeni salt works. Solve practice problems.

Calculator, graph paper, data tables, worked examples from textbook

KLB Secondary Chemistry Form 4, Pages 21-22

ACIDS, BASES AND SALTS

Hardness of Water - Investigation

By the end of the lesson, the learner should be able to:
- Determine the effects of various salt solutions on soap
-Identify cations that cause hardness
-Distinguish between hard and soft water
-Investigate effect of boiling on water hardness

Class experiment: Test soap lathering with distilled water, tap water, rainwater, and solutions of MgCl₂, NaCl, Ca(NO₃)₂, CaHCO₃, NaHCO₃, ZnSO₄. Record volumes of soap needed. Boil some solutions and retest. Compare results and identify hardness-causing ions.

Soap solution, burette, various salt solutions, conical flasks, distilled water, tap water, rainwater, heating source

KLB Secondary Chemistry Form 4, Pages 22-24

ACIDS, BASES AND SALTS

Types and Causes of Water Hardness
Effects of Hard Water

By the end of the lesson, the learner should be able to:
- Define temporary and permanent hardness
-Explain causes of temporary hardness
-Explain causes of permanent hardness
-Write equations for decomposition of hydrogen carbonates

Q/A: Review previous experiment results. Explain temporary hardness caused by Ca(HCO₃)₂ and Mg(HCO₃)₂. Write decomposition equations when boiled. Explain permanent hardness caused by CaSO₄, MgSO₄, Ca(NO₃)₂, Mg(NO₃)₂. Discuss why permanent hardness cannot be removed by boiling.

Student books, examples from previous experiment, chalkboard for equations
Samples of fur deposits, pictures of scaled pipes, calculator for cost analysis

KLB Secondary Chemistry Form 4, Pages 24-25

ACIDS, BASES AND SALTS

Methods of Removing Hardness I
Methods of Removing Hardness II

By the end of the lesson, the learner should be able to:
- Explain removal of hardness by boiling
-Explain removal by distillation
-Write equations for these processes
-Compare effectiveness of different methods
- Explain removal using sodium carbonate
-Describe ion exchange method
-Explain removal using calcium hydroxide and ammonia
-Write equations for all processes

Demonstrate boiling method: Boil hard water samples from previous experiments and test with soap. Write equations for Ca(HCO₃)₂ and Mg(HCO₃)₂ decomposition. Discuss distillation method using apparatus setup. Compare costs and effectiveness. Explain why boiling only removes temporary hardness.
Demonstrate addition of Na₂CO₃ to hard water - observe precipitation. Explain ion exchange using resin (NaX) showing Ca²⁺ + 2NaX → CaX₂ + 2Na⁺. Discuss regeneration with brine. Write equations for Ca(OH)₂ and NH₃ methods. Compare all methods for effectiveness and cost.

Hard water samples, heating source, soap solution, distillation apparatus diagram
Na₂CO₃ solution, hard water samples, ion exchange resin diagram, Ca(OH)₂, NH₃ solution

KLB Secondary Chemistry Form 4, Pages 25-26

ELECTROCHEMISTRY

Redox Reactions and Oxidation Numbers
Oxidation Numbers in Naming and Redox Identification
Displacement Reactions - Metals and Halogens

By the end of the lesson, the learner should be able to:
Define redox reactions in terms of electron transfer
- State rules for assigning oxidation numbers
- Calculate oxidation numbers in compounds
- Identify oxidation and reduction processes

Q/A: Review previous knowledge
- Experiment 4.1: Iron filings + copper(II) sulphate
- Experiment 4.2: Iron(II) ions + hydrogen peroxide
- Discussion on oxidation number rules with examples

Iron filings, 1M CuSO₄, 1M FeSO₄, 2M NaOH, 20V H₂O₂, test tubes
Compound charts, calculators, student books, practice exercises
Various metals (Ca, Mg, Zn, Fe, Pb, Cu), metal salt solutions, halogens (Cl₂, Br₂, I₂), halide solutions

KLB Secondary Chemistry Form 4, Pages 108-116

ELECTROCHEMISTRY

Electrochemical Cells and Cell Diagrams
Standard Electrode Potentials

By the end of the lesson, the learner should be able to:
Define electrode potential and EMF
- Describe electrochemical cell components
- Draw cell diagrams using correct notation
- Explain electron flow and salt bridge function

Experiment 4.5: Set up Zn/Cu cell and other metal combinations
- Measure EMF values
- Practice writing cell notation
- Learn conventional representation methods

Metal electrodes, 1M metal salt solutions, voltmeters, salt bridges, connecting wires
Standard electrode potential table, diagrams, charts showing standard conditions

KLB Secondary Chemistry Form 4, Pages 123-128

ELECTROCHEMISTRY

Calculating Cell EMF and Predicting Reactions
Types of Electrochemical Cells
Electrolysis of Aqueous Solutions I

By the end of the lesson, the learner should be able to:
Calculate EMF using standard electrode potentials
- Predict reaction spontaneity using EMF
- Solve numerical problems on cell EMF
- Apply EMF calculations practically

Worked examples: Calculate EMF for various cells
- Practice EMF calculations
- Exercise 4.2 & 4.3: Cell EMF and reaction feasibility problems
- Distinguish spontaneous from non-spontaneous reactions

Calculators, electrode potential data, worked examples, practice problems
Cell diagrams, sample batteries, charts showing cell applications
Dilute and concentrated NaCl solutions, carbon electrodes, gas collection tubes, test equipment

KLB Secondary Chemistry Form 4, Pages 133-137

ELECTROCHEMISTRY

Electrolysis of Aqueous Solutions II
Effect of Electrode Material on Electrolysis

By the end of the lesson, the learner should be able to:
Analyze electrolysis of dilute sulphuric acid
- Investigate electrolysis of metal salt solutions
- Measure gas volumes and ratios
- Apply theoretical predictions
Compare inert vs reactive electrodes
- Investigate electrode dissolution
- Explain electrode selection importance
- Analyze copper purification process

Experiment 4.7: Electrolysis of dilute H₂SO₄ using U-tube
- Experiment 4.8: Electrolysis of MgSO₄ solution
- Collect and measure gases
- Analyze volume ratios
Experiment 4.9: Electrolysis of CuSO₄ with carbon vs copper electrodes
- Weigh electrodes before/after
- Observe color changes
- Discussion on electrode effects

U-tube apparatus, 2M H₂SO₄, 0.5M MgSO₄, platinum/carbon electrodes, gas syringes
Copper and carbon electrodes, 3M CuSO₄ solution, accurate balance, beakers, connecting wires

KLB Secondary Chemistry Form 4, Pages 146-148
KLB Secondary Chemistry Form 4, Pages 141-148

ELECTROCHEMISTRY

Factors Affecting Electrolysis
Applications of Electrolysis I

By the end of the lesson, the learner should be able to:
Identify factors affecting preferential discharge
- Explain electrochemical series influence
- Discuss concentration and electrode effects
- Predict electrolysis products

Review electrochemical series and discharge order
- Analysis of concentration effects on product formation
- Summary of all factors affecting electrolysis
- Practice prediction problems

Electrochemical series chart, summary tables, practice exercises, student books
Iron nails, copper electrodes, CuSO₄ solution, power supply, industrial process diagrams

KLB Secondary Chemistry Form 4, Pages 153-155

ELECTROCHEMISTRY

Applications of Electrolysis II

By the end of the lesson, the learner should be able to:
Describe manufacture of NaOH and Cl₂ from brine
- Explain mercury cell operation
- Analyze industrial electrolysis processes
- Discuss environmental considerations

Study mercury cell for NaOH production
- Flow chart analysis of industrial processes
- Discussion on applications and environmental impact
- Purification of metals

Flow charts, mercury cell diagrams, environmental impact data, industrial case studies

KLB Secondary Chemistry Form 4, Pages 155-157

ELECTROCHEMISTRY

Faraday's Laws and Quantitative Electrolysis

By the end of the lesson, the learner should be able to:
State Faraday's laws of electrolysis
- Define Faraday constant
- Calculate mass deposited in electrolysis
- Relate electricity to amount of substance

Experiment 4.10: Quantitative electrolysis of CuSO₄
- Measure mass vs electricity passed
- Calculate Faraday constant
- Verify Faraday's laws

Accurate balance, copper electrodes, CuSO₄ solution, ammeter, timer, calculators

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY

Electrolysis Calculations I
Electrolysis Calculations II

By the end of the lesson, the learner should be able to:
Calculate mass of products from electrolysis
- Determine volumes of gases evolved
- Apply Faraday's laws to numerical problems
- Solve basic electrolysis calculations
Determine charge on ions from electrolysis data
- Calculate current-time relationships
- Solve complex multi-step problems
- Apply concepts to industrial situations

Worked examples: Mass and volume calculations
- Problems involving different ions
- Practice with Faraday constant
- Basic numerical problems
Complex problems: Determine ionic charges
- Current-time-mass relationships
- Multi-step calculations
- Industrial calculation examples

Calculators, worked examples, practice problems, gas volume data, Faraday constant
Calculators, complex problem sets, industrial data, student books

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY
METALS

Advanced Applications and Problem Solving
Chemical Properties I - Reaction with Air

By the end of the lesson, the learner should be able to:
Solve examination-type electrochemistry problems
- Apply all concepts in integrated problems
- Analyze real-world electrochemical processes
- Practice complex calculations

Comprehensive problems combining redox, cells, and electrolysis
- Past examination questions
- Industrial case study analysis
- Advanced problem-solving techniques

Past papers, comprehensive problem sets, industrial case studies, calculators
Deflagrating spoons, metal samples (Na, Al, Zn, Fe, Cu), Bunsen burners, safety equipment

KLB Secondary Chemistry Form 4, Pages 108-164

METALS

Chemical Properties II - Reaction with Water

By the end of the lesson, the learner should be able to:
Test metal reactions with cold water and steam
- Arrange metals by reactivity
- Explain aluminium's apparent unreactivity
- Write chemical equations for reactions

Experiment 5.2: Test metals with cold water and steam
- Use Table 5.4 for observations
- Test solutions with indicators
- Arrange metals in reactivity order

Metal samples, cold water, steam generator, test tubes, universal indicator, safety equipment

KLB Secondary Chemistry Form 4, Pages 154-156

METALS

Chemical Properties III - Reaction with Chlorine

By the end of the lesson, the learner should be able to:
Investigate metal reactions with chlorine gas
- Write equations for chloride formation
- Compare reaction vigor
- Observe product characteristics

Experiment 5.3: React hot metals with chlorine gas (FUME CUPBOARD)
- Observe color changes and fume formation
- Record all observations
- Write balanced equations

Chlorine gas, gas jars, metal samples, tongs, deflagrating spoons, fume cupboard, safety equipment

KLB Secondary Chemistry Form 4, Pages 156-157

METALS

Chemical Properties IV - Reaction with Acids
Uses of Metals I - Sodium and Aluminium
Uses of Metals II - Zinc, Copper and Iron

By the end of the lesson, the learner should be able to:
Test metal reactions with dilute and concentrated acids
- Compare reaction patterns
- Write chemical equations
- Explain passivation effects
Explain galvanization process
- Describe copper electrical applications
- Compare iron, steel, and cast iron uses
- Analyze alloy compositions and properties

Experiment 5.4: Test metals with various acids - HCl, HNO₃, H₂SO₄
- Use Table 5.5 for systematic recording
- Observe gas evolution
- Discuss passivation
Study galvanization and rust prevention
- Copper in electrical applications
- Different types of steel and their compositions
- Alloy property comparisons

Various acids (dilute and concentrated), metal strips, test tubes, gas collection apparatus, safety equipment
Charts showing metal applications, alloy samples, aircraft parts, cooking vessels
Galvanized sheets, copper wires, steel samples, alloy composition charts, brass and bronze samples

KLB Secondary Chemistry Form 4, Pages 157-158
KLB Secondary Chemistry Form 4, Pages 159-161

METALS

Steel Types and Alloys
Environmental Effects of Metal Extraction

By the end of the lesson, the learner should be able to:
Compare cast iron, wrought iron, and steel
- Analyze different steel compositions
- Explain alloy property enhancement
- Describe specialized steel applications

Study cast iron, wrought iron, mild steel, and stainless steel
- Analyze carbon content effects
- Specialized steels for tools and instruments
- Discussion on alloy design

Steel samples with different compositions, carbon content charts, specialized tools, stainless steel items
Environmental impact case studies, pollution images, NEMA regulation documents, waste management examples

KLB Secondary Chemistry Form 4, Pages 159-161